From mboxrd@z Thu Jan 1 00:00:00 1970 From: jamie@jamieiles.com (Jamie Iles) Date: Thu, 10 Nov 2011 14:53:18 +0000 Subject: [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER In-Reply-To: References: <1320369010-23428-1-git-send-email-jamie@jamieiles.com> <1320369010-23428-8-git-send-email-jamie@jamieiles.com> <20111109115406.GB4253@totoro> Message-ID: <20111110145318.GD16018@totoro> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Nov 09, 2011 at 06:00:20PM +0530, Thomas Abraham wrote: > On 9 November 2011 17:24, Jamie Iles wrote: > > On Wed, Nov 09, 2011 at 04:55:06PM +0530, Thomas Abraham wrote: > >> Hi Jamie, > >> > >> On 4 November 2011 06:40, Jamie Iles wrote: > >> > Now that there is a generic IRQ handler for multiple VIC devices use it > >> > for s3c64xx to help building multi platform kernels. > >> > > >> > Cc: Ben Dooks > >> > Signed-off-by: Jamie Iles > >> > --- > >> > ?arch/arm/Kconfig ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 + > >> > ?arch/arm/mach-s3c64xx/include/mach/entry-macro.S | ? ?7 ++++--- > >> > ?arch/arm/mach-s3c64xx/mach-anw6410.c ? ? ? ? ? ? | ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-crag6410.c ? ? ? ? ? ?| ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-hmt.c ? ? ? ? ? ? ? ? | ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-mini6410.c ? ? ? ? ? ?| ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-ncp.c ? ? ? ? ? ? ? ? | ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-real6410.c ? ? ? ? ? ?| ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-smartq5.c ? ? ? ? ? ? | ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-smartq7.c ? ? ? ? ? ? | ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-smdk6400.c ? ? ? ? ? ?| ? ?2 ++ > >> > ?arch/arm/mach-s3c64xx/mach-smdk6410.c ? ? ? ? ? ?| ? ?2 ++ > >> > ?12 files changed, 25 insertions(+), 3 deletions(-) > >> > > >> > >> I have tested this patch series on smdk6410 board (s3c64xx) using the > >> following repositorty and branch > >> > >> https://github.com/jamieiles/linux-2.6-ji.git ?branch: vic-dt > >> > >> There is a crash while booting. Am I using the right tree and branch? > >> The following is the boot log. Is there any other config option to be > >> enabled? > > > > Hmm, could you please try with the patch below applied? [...] > > This patch solves the issue and both smdk6410 and smdkv210 works fine. Brilliant, thanks Thomas. Mind if I add a Tested-by from you providing the fixup patch is applied first? Jamie