From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@opensource.wolfsonmicro.com (Mark Brown) Date: Mon, 5 Dec 2011 10:33:16 +0000 Subject: [PATCH] backlight: add regulator support for platform_lcd driver In-Reply-To: References: <1323074921-29291-1-git-send-email-thomas.abraham@linaro.org> Message-ID: <20111205103315.GB11150@opensource.wolfsonmicro.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Dec 05, 2011 at 07:10:03PM +0900, Kyungmin Park wrote: > > + if (plcd->pdata->min_uV || plcd->pdata->max_uV) > > + if (regulator_set_voltage(lcd_regulator, > > + plcd->pdata->min_uV, plcd->pdata->max_uV)) > > + dev_info(plcd->us, > > + "regulator voltage set failed\n"); > Are there case to change the voltage? Doesn't it easy to set the > voltage at board file? I mean don't need to setup at drivers? Yes, unless the driver changes the voltage it should just assume the voltage is already set up sensibly and leave it up to the board to do any configuration which is required on boot. There is one existing driver which implements things this way in the video subsystem but that should be fixed.