linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/7] s3c-hsudc: add a remove function
Date: Sun, 18 Dec 2011 10:42:15 +0100	[thread overview]
Message-ID: <201112181042.15550.heiko@sntech.de> (raw)
In-Reply-To: <20111218081048.GS14542@n2100.arm.linux.org.uk>

Am Sonntag 18 Dezember 2011, 09:10:48 schrieb Russell King - ARM Linux:
> On Sat, Dec 17, 2011 at 08:26:33PM +0100, Heiko St?bner wrote:
> > As the driver is also buildable as a module it should need
> > a cleanup function for the removal of the module.
> 
> My guess is that this wasn't implemented because of the embedded struct
> device lifetime rules for the gadget - to prevent the unbinding of the
> driver.
> 
> Until the struct device lifetime gets fixed, you must not allow the module
> nor the data structure containing the struct device to be freed.
so essentially, this patch and the release stuff in 5/7 must go.

Thanks for pointing out this problem.


> > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > ---
> > 
> >  drivers/usb/gadget/s3c-hsudc.c |   25 +++++++++++++++++++++++++
> >  1 files changed, 25 insertions(+), 0 deletions(-)
> > 
> > diff --git a/drivers/usb/gadget/s3c-hsudc.c
> > b/drivers/usb/gadget/s3c-hsudc.c index 3e5673d..7cb0850 100644
> > --- a/drivers/usb/gadget/s3c-hsudc.c
> > +++ b/drivers/usb/gadget/s3c-hsudc.c
> > 
> > @@ -1370,12 +1370,37 @@ err_res:
> >  	return ret;
> >  
> >  }
> > 
> > +static int __devexit s3c_hsudc_remove(struct platform_device *pdev)
> > +{
> > +	struct s3c_hsudc *hsudc = the_controller;
> > +
> > +	usb_del_gadget_udc(&hsudc->gadget);
> > +
> > +	clk_disable(hsudc->uclk);
> > +	clk_put(hsudc->uclk);
> > +
> > +	free_irq(hsudc->irq, hsudc);
> > +
> > +	iounmap(hsudc->regs);
> > +
> > +	release_resource(hsudc->mem_rsrc);
> > +	kfree(hsudc->mem_rsrc);
> > +
> > +	if (hsudc->transceiver)
> > +		otg_put_transceiver(hsudc->transceiver);
> > +
> > +	the_controller = NULL;
> > +	kfree(hsudc);
> > +	return 0;
> > +}
> > +
> > 
> >  static struct platform_driver s3c_hsudc_driver = {
> >  
> >  	.driver		= {
> >  	
> >  		.owner	= THIS_MODULE,
> >  		.name	= "s3c-hsudc",
> >  	
> >  	},
> >  	.probe		= s3c_hsudc_probe,
> > 
> > +	.remove		= __devexit_p(s3c_hsudc_remove),
> > 
> >  };
> >  
> >  module_platform_driver(s3c_hsudc_driver);

  reply	other threads:[~2011-12-18  9:42 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-17 19:23 [PATCH v2 0/7] s3c-hsudc: regulator handling and a lot of fixes Heiko Stübner
2011-12-17 19:24 ` [PATCH 1/7] s3c-hsudc: move platform_data struct to global header Heiko Stübner
2011-12-17 19:25 ` [PATCH 2/7] s3c-hsudc: add __devinit to probe function Heiko Stübner
2011-12-17 19:26 ` [PATCH 3/7] s3c-hsudc: add a remove function Heiko Stübner
2011-12-18  8:03   ` Russell King - ARM Linux
2011-12-18  8:10   ` Russell King - ARM Linux
2011-12-18  9:42     ` Heiko Stübner [this message]
2011-12-18 13:44     ` Heiko Stübner
2011-12-18 14:43       ` Russell King - ARM Linux
2011-12-18 18:50         ` Heiko Stübner
2011-12-18 19:01           ` Russell King - ARM Linux
2011-12-18 19:33             ` Heiko Stübner
2011-12-18 19:45               ` Russell King - ARM Linux
2011-12-18 20:24                 ` Heiko Stübner
2011-12-18 20:39                   ` Russell King - ARM Linux
2011-12-18 20:46                     ` Heiko Stübner
2011-12-18 21:37                       ` Russell King - ARM Linux
2011-12-20  6:08                         ` Greg KH
2011-12-20  6:07           ` Greg KH
2011-12-17 19:27 ` [PATCH 4/7] s3c-hsudc: add missing otg_put_transceiver in probe Heiko Stübner
2011-12-17 19:28 ` [PATCH 5/7] s3c-hsudc: move device registration to probe and remove Heiko Stübner
2011-12-18  8:09   ` Russell King - ARM Linux
2011-12-17 19:29 ` [PATCH 6/7] s3c-hsudc: use udc_start and udc_stop functions Heiko Stübner
2011-12-17 19:30 ` [PATCH 7/7] s3c-hsudc: Add regulator handling Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201112181042.15550.heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).