From mboxrd@z Thu Jan  1 00:00:00 1970
From: marek.vasut@gmail.com (Marek Vasut)
Date: Tue, 20 Dec 2011 14:49:13 +0100
Subject: [PATCH 08/12] serial: mxs-auart: convert to
 clk_prepare/clk_unprepare
In-Reply-To: <1324382443-4439-9-git-send-email-shawn.guo@linaro.org>
References: <1324382443-4439-1-git-send-email-shawn.guo@linaro.org>
 <1324382443-4439-9-git-send-email-shawn.guo@linaro.org>
Message-ID: <201112201449.13420.marek.vasut@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

> The patch converts mxs-auart driver to clk_prepare/clk_unprepare by
> using helper functions clk_prepare_enable/clk_disable_unprepare.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Alan Cox <alan@linux.intel.com>
> ---
>  drivers/tty/serial/mxs-auart.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/tty/serial/mxs-auart.c
> b/drivers/tty/serial/mxs-auart.c index 7e02c9c..c33500a 100644
> --- a/drivers/tty/serial/mxs-auart.c
> +++ b/drivers/tty/serial/mxs-auart.c
> @@ -424,7 +424,7 @@ static int mxs_auart_startup(struct uart_port *u)
>  {
>  	struct mxs_auart_port *s = to_auart_port(u);
> 
> -	clk_enable(s->clk);
> +	clk_prepare_enable(s->clk);
> 
>  	writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
> 
> @@ -453,7 +453,7 @@ static void mxs_auart_shutdown(struct uart_port *u)
>  	writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
>  			u->membase + AUART_INTR_CLR);
> 
> -	clk_disable(s->clk);
> +	clk_disable_unprepare(s->clk);
>  }
> 
>  static unsigned int mxs_auart_tx_empty(struct uart_port *u)
> @@ -634,7 +634,7 @@ auart_console_setup(struct console *co, char *options)
>  	if (!s)
>  		return -ENODEV;
> 
> -	clk_enable(s->clk);
> +	clk_prepare_enable(s->clk);
> 
>  	if (options)
>  		uart_parse_options(options, &baud, &parity, &bits, &flow);
> @@ -643,7 +643,7 @@ auart_console_setup(struct console *co, char *options)
> 
>  	ret = uart_set_options(&s->port, co, baud, parity, bits, flow);
> 
> -	clk_disable(s->clk);
> +	clk_disable_unprepare(s->clk);
> 
>  	return ret;
>  }

DTTO here, are you sure all of them are not called from atomic ctx?