From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later
Date: Tue, 20 Dec 2011 20:40:46 +0000 [thread overview]
Message-ID: <20111220204046.GA3354@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <201112200028.32947.jkrzyszt@tis.icnet.pl>
On Tue, Dec 20, 2011 at 12:28:32AM +0100, Janusz Krzysztofik wrote:
> diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
> index d4d08bd..56ffd7c 100644
> --- a/drivers/input/serio/ams_delta_serio.c
> +++ b/drivers/input/serio/ams_delta_serio.c
> @@ -165,6 +165,9 @@ serio:
> kfree(ams_delta_serio);
> return err;
> }
> +#ifndef MODULE
> +late_initcall(ams_delta_serio_init);
> +#else
> module_init(ams_delta_serio_init);
>
> static void __exit ams_delta_serio_exit(void)
> @@ -175,3 +178,4 @@ static void __exit ams_delta_serio_exit(void)
> gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
> }
> module_exit(ams_delta_serio_exit);
> +#endif
It's worth noting:
#ifndef MODULE
#define late_initcall(fn) __define_initcall("7",fn,7)
#else /* MODULE */
#define late_initcall(fn) module_init(fn)
So really, all these ifndefs aren't required. Just change the module_init()
to late_initcall().
next prev parent reply other threads:[~2011-12-20 20:40 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-11 20:11 [PATCH 00/10] ARM: OMAP1: ams-delta: replace custom I/O with GPIO Janusz Krzysztofik
2011-12-11 20:11 ` [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore Janusz Krzysztofik
2011-12-12 18:04 ` Tony Lindgren
2011-12-12 23:05 ` Janusz Krzysztofik
2011-12-12 23:15 ` Tony Lindgren
2011-12-12 23:44 ` Janusz Krzysztofik
2011-12-12 23:55 ` Tony Lindgren
2011-12-13 0:15 ` Janusz Krzysztofik
2011-12-14 13:10 ` Janusz Krzysztofik
2011-12-14 18:21 ` Tony Lindgren
2011-12-14 20:07 ` Janusz Krzysztofik
2011-12-14 22:10 ` Tony Lindgren
2011-12-14 11:13 ` Janusz Krzysztofik
2011-12-11 20:12 ` [PATCH 02/10] ARM: OMAP1: ams-delta: Convert latches to basic_mmio_gpio Janusz Krzysztofik
2011-12-11 20:12 ` [PATCH 03/10] ARM: OMAP1: ams-delta: Supersede custom led device by leds-gpio Janusz Krzysztofik
2011-12-11 20:12 ` [PATCH 04/10] LED: Drop leds-ams-delta driver Janusz Krzysztofik
2011-12-11 20:12 ` [PATCH 05/10] MTD: NAND: ams-delta: Use GPIO instead of custom I/O Janusz Krzysztofik
2011-12-11 20:12 ` [PATCH 06/10] ARM: OMAP1: ams-delta: Use GPIO API in modem setup Janusz Krzysztofik
2011-12-11 20:12 ` [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API Janusz Krzysztofik
2011-12-12 4:29 ` Mark Brown
2011-12-21 18:33 ` Liam Girdwood
2011-12-21 22:14 ` Janusz Krzysztofik
2011-12-22 9:25 ` Girdwood, Liam
2011-12-11 20:12 ` [PATCH 08/10] omapfb: lcd_ams_delta: Drive control lines over GPIO Janusz Krzysztofik
2011-12-12 11:24 ` Tomi Valkeinen
2011-12-11 20:12 ` [PATCH 09/10] input: serio: ams-delta: Toggle keyboard power " Janusz Krzysztofik
2011-12-12 8:18 ` Dmitry Torokhov
2011-12-11 20:12 ` [PATCH 10/10] ARM: OMAP1: ams-delta: Drop custom I/O functions Janusz Krzysztofik
2011-12-12 5:00 ` [PATCH 00/10] ARM: OMAP1: ams-delta: replace custom I/O with GPIO Jonathan McDowell
2011-12-19 23:08 ` [PATCH v2 0/7] " Janusz Krzysztofik
2011-12-19 23:08 ` [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio Janusz Krzysztofik
2011-12-20 0:06 ` Tony Lindgren
2011-12-20 0:59 ` Janusz Krzysztofik
2011-12-20 1:04 ` Tony Lindgren
2011-12-20 1:18 ` Janusz Krzysztofik
2011-12-20 2:13 ` Tony Lindgren
2011-12-20 2:24 ` [PATCH v2 2/7 v2] " Janusz Krzysztofik
2011-12-19 23:08 ` [PATCH v2 3/7] ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio Janusz Krzysztofik
2011-12-19 23:08 ` [PATCH v2 4/7] LED: drop leds-ams-delta driver Janusz Krzysztofik
2011-12-19 23:08 ` [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O Janusz Krzysztofik
2011-12-21 19:12 ` Tony Lindgren
2011-12-21 19:45 ` Janusz Krzysztofik
2011-12-21 20:56 ` Artem Bityutskiy
2011-12-19 23:08 ` [PATCH v2 6/7] omapfb: lcd_ams_delta: drive control lines over GPIO Janusz Krzysztofik
2011-12-19 23:08 ` [PATCH v2 7/7] input: serio: ams-delta: toggle keyboard power " Janusz Krzysztofik
2011-12-20 22:10 ` [PATCH] " Janusz Krzysztofik
2011-12-21 19:09 ` Tony Lindgren
2011-12-21 19:55 ` Janusz Krzysztofik
2011-12-22 17:45 ` Dmitry Torokhov
2011-12-22 18:06 ` Tony Lindgren
[not found] ` <83e934adfc691b347534edb7788a67ab2e6bd7e1.1324331816.git.jkrzyszt@tis.icnet.pl>
2011-12-19 23:28 ` [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later Janusz Krzysztofik
2011-12-20 18:06 ` Tony Lindgren
2011-12-20 20:34 ` Janusz Krzysztofik
2011-12-20 20:57 ` Tony Lindgren
2011-12-20 20:40 ` Russell King - ARM Linux [this message]
2011-12-20 20:51 ` [alsa-devel] " Janusz Krzysztofik
2011-12-20 21:54 ` [PATCH v2 1/7 v2] " Janusz Krzysztofik
2011-12-21 19:08 ` Tony Lindgren
2011-12-21 19:51 ` Janusz Krzysztofik
2011-12-21 20:07 ` Tony Lindgren
2011-12-22 10:39 ` Janusz Krzysztofik
2011-12-22 11:08 ` Jarkko Nikula
2011-12-22 11:10 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111220204046.GA3354@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).