[PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450

[heiko@sntech.de (Heiko Stübner)]

Am Mittwoch, 21. Dezember 2011, 08:25:53 schrieb Kukjin Kim:
> Heiko St?bner wrote:
> > Similar to the ADC the RTC of S3C2443 and S3C2416/2450 has some slight
> > variances when compared to the existing types.
> > 
> > This series adds support for those SoCs.
> > 
> > As with the ADC patches, these changes where tested on S3C2416 hardware.
> > The S3C2443 quirks are a subset of those and are done according to the
> > datasheet, but not tested on real hardware (as I do not own a S3C2443
> > device).
> > 
> > changes since v1:
> > address comments from Thomas Abraham, reducing number of ifdefs and
> > duplicate code
> > 
> > Heiko Stuebner (4):
> >   ARM: SAMSUNG: cleanup of rtc register definitions
> >   rtc-s3c: make room for more variants in devicetree block
> >   rtc-s3c: add variants for S3C2443 and S3C2416
> >   ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices
> >  
> >  arch/arm/mach-s3c2416/s3c2416.c               |    2 +
> >  arch/arm/mach-s3c2443/s3c2443.c               |    2 +
> >  arch/arm/plat-samsung/include/plat/regs-rtc.h |   92
> 
> +++++++++++++++------
> 
> > ---
> > 
> >  arch/arm/plat-samsung/include/plat/rtc-core.h |   27 +++++++
> >  drivers/rtc/rtc-s3c.c                         |   74
> >  ++++++++++++++++---- 5 files changed, 149 insertions(+), 48
> >  deletions(-)
> >  create mode 100644 arch/arm/plat-samsung/include/plat/rtc-core.h
> > 
> > --
> > 1.7.5.4
> 
> Hi Heiko,
> 
> There were small comments on 1st patch and others looks ok to me.
> If you're ok on my comments, please re-send it so that I can request to
> pull this series to Alessandro or Andrew with my ack.

I'm on it now. 

Who is Andrew and should I include him in the recipients? I only found 
Alessandro Zummo in the MAINTAINERS file for rtc stuff and am lacking any 
comment from the rtc-side until now.

Heiko