[RFC] cpufreq: Add S3C2416/S3C2450 cpufreq driver

[heiko@sntech.de (Heiko Stübner)]

Am Freitag 30 Dezember 2011, 08:48:30 schrieb Dron Gus:
> Hi.
> 
> On Thu, Dec 29, 2011 at 11:58 PM, Heiko St?bner <heiko@sntech.de> wrote:
> ...
> 
> > +static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy
> > *policy)
> 
> ...
> 
> > +       s3c_freq->armdiv = clk_get(NULL, "armdiv");
> > +       if (IS_ERR(s3c_freq->armdiv)) {
> > +               pr_err("cpufreq: Unable to obtain ARMDIV: %ld\n",
> > +                      PTR_ERR(s3c_freq->armdiv));
> > +               return PTR_ERR(s3c_freq->armdiv);
> > +       }
> > +
> > +       s3c_freq->hclk = clk_get(NULL, "hclk");
> > +       if (IS_ERR(s3c_freq->hclk)) {
> > +               pr_warn("cpufreq: Unable to obtain HCLK: %ld\n",
> > +                      PTR_ERR(s3c_freq->hclk));
> > +               s3c_freq->hclk = NULL; /*we can live without hclk */
> > +       }
> 
> clk_put allready obtained "armdiv"?
> 
> > +
> > +       s3c_freq->armclk = clk_get(NULL, "armclk");
> > +       if (IS_ERR(s3c_freq->armclk)) {
> > +               pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
> > +                      PTR_ERR(s3c_freq->armclk));
> > +               return PTR_ERR(s3c_freq->armclk);
> > +       }
> 
> Same for "hclk" and "armclk"?
thanks for finding those, it seems probe also needs a lot more love.

As you were also working on S3C2416 stuff, could you possibly test the driver 
and see if it still hangs for you?

After I introduced the switch from hclk to armdiv using a forced armdiv=hclk 
frequency the hangs stopped for me and the devices ran hours with varying 
workloads without hangs. (also including voltage scaling)

Heiko