From mboxrd@z Thu Jan  1 00:00:00 1970
From: marek.vasut@gmail.com (Marek Vasut)
Date: Sat, 31 Dec 2011 05:45:12 +0100
Subject: [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not
 MX23
In-Reply-To: <4EFE8215.8030301@freescale.com>
References: <1325233646-3343-1-git-send-email-b32955@freescale.com>
 <201112310415.02867.marek.vasut@gmail.com> <4EFE8215.8030301@freescale.com>
Message-ID: <201112310545.13053.marek.vasut@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

> hi,
> 
> >> Hi,
> >> 
> >>> On Fri, Dec 30, 2011 at 04:27:26PM +0800, Huang Shijie wrote:
> >>>> In MX28, if we do not reset the BCH module. The BCH module may
> >>>> becomes unstable when the board reboots for several thousands times.
> >>> 
> >>> Do you have more details when and why this happens? What happens on
> >>> MX23 then?
> >> 
> >> In one customer's 3G router which uses the MX28:
> >> [0] NAND boot mode, mount the UBIFS in the NAND partition.
> >> [1] We used the gpmi_reset_block(r->bch_regs, true) to init the BCH
> >> module. [2] The board will automatically reboot again after it booted
> >> by NAND boot mode.
> >> [3] After reboot more then thousands times(cost nearly one day), the BCH
> >> mode became UNSTABLE,
> >> the data read out was not right, so the system could not mount the
> >> UBIFS.
> >> 
> >> After we use gpmi_reset_block(r->bch_regs, false) to init the BCH
> >> module, the bug never happens.
> >> 
> >> 
> >> 
> >> The gpmi_reset_block() was coded to avoid the NAND boot bug in MX23. So
> >> MX23 does not have the bug.
> >> 
> >>>> Signed-off-by: Huang Shijie<b32955@freescale.com>
> >>> 
> >>> Is this Bug 2847 from the errata? Should be mentioned in the commit
> >>> message and
> >> 
> >> Yes, this is the bug 2847 from the mx23's errata.
> >> 
> >> I will add some comments to it.
> >> 
> >> Best Regards
> >> Huang Shijie
> >> 
> >>> comments of the patch if so.
> >>> 
> >>> Regards,
> >>> 
> >>>     Wolfram
> > 
> > Ah, so you confirmed it's a problem with the silicon. Good
> 
> yes, the bug in mx23 is really a hardware bug.
> 
> BR
> Huang Shijie

All right. Well ... this is probably the last email your way until next year so:

I wish you a successful 2012, thanks for all your awesome work and I hope we'll 
be able to continue working (not only) on MXS well next year too!

M