From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 3/4] Rockchip dts64 updates for 4.18 round 1
Date: Tue, 15 May 2018 12:39:26 +0200 [thread overview]
Message-ID: <20114925.REm1YfjZS7@phil> (raw)
In-Reply-To: <2000491.bLgWuj0xar@phil>
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v4.18-rockchip-dts64-1
for you to fetch changes up to 17bd0737948aa841b76278a601217b914aa5f18e:
arm64: dts: rockchip: enable hdmi on rk3399-puma-haikou (2018-05-03 14:38:20 +0200)
----------------------------------------------------------------
All iommus got their clocks added and rk3399 got support for its
usb3-phy otg-port and better ajustment for the cpll child clocks.
On the board side, all rk3399 got their typec phys enabled - which
is needed for better usb support, the sapphire board got some more
properties moved to the excavator baseboard where they really belong,
kevin got a fix to use a real devicetree compatible and puma-haikou
got its hdmi port enabled.
----------------------------------------------------------------
Dmitry Torokhov (1):
arm64: dts: rockchip: use canonical compatible for touchpad/touchscreen on gru-kevin
Enric Balletbo i Serra (5):
arm64: dts: rockchip: enable typec-phy for rk3399-sapphire
arm64: dts: rockchip: enable typec-phy for rk3399-firefly
arm64: dts: rockchip: enable typec-phy1 for rk3399-puma
arm64: dts: rockchip: enable typec-phy0 for rk3399-puma-haikou
arm64: dts: rockchip: add usb3-phy otg-port support for rk3399
Jakob Unterwurzacher (1):
arm64: dts: rockchip: enable hdmi on rk3399-puma-haikou
Jeffy Chen (1):
arm64: dts: rockchip: add clocks in iommu nodes
Lin Huang (1):
arm64: dts: rockchip: assign clock rate for cpll child clocks on rk3399
Vicente Bergas (2):
arm64: dts: rockchip: move rk3399-sapphire PCIe to excavator baseboard
arm64: dts: rockchip: remove PCIe assigned-clocks in excavator baseboard
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 10 ++++++
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 10 ++++++
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 8 +++++
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 4 +--
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 8 +++--
.../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 25 +++++++++++++++
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 4 +++
.../dts/rockchip/rk3399-sapphire-excavator.dts | 12 ++++++++
arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 23 +++++---------
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 36 ++++++++++++++++------
10 files changed, 111 insertions(+), 29 deletions(-)
next prev parent reply other threads:[~2018-05-15 10:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-15 10:38 [GIT PULL 1/4] Rockchip driver updates for 4.18 round 1 Heiko Stuebner
2018-05-15 10:38 ` [GIT PULL 2/4] Rockchip dts32 " Heiko Stuebner
2018-05-15 20:52 ` Olof Johansson
2018-05-15 10:39 ` Heiko Stuebner [this message]
2018-05-15 20:52 ` [GIT PULL 3/4] Rockchip dts64 " Olof Johansson
2018-05-15 10:40 ` [GIT PULL 4/4] Rockchip arm64 defconfig " Heiko Stuebner
2018-05-15 20:53 ` Olof Johansson
2018-05-15 21:41 ` Heiko Stübner
2018-05-15 20:51 ` [GIT PULL 1/4] Rockchip driver " Olof Johansson
2018-07-11 14:28 ` [GIT PULL 1/2] Rockchip dts32 updates for 4.19 " Heiko Stuebner
2018-07-11 14:29 ` [GIT PULL 2/2] Rockchip dts64 " Heiko Stuebner
2018-07-14 21:06 ` Olof Johansson
2018-07-14 21:06 ` [GIT PULL 1/2] Rockchip dts32 " Olof Johansson
2018-07-30 22:35 ` [GIT PULL 1/2] Rockchip dts64 updates for 4.19 round 2 Heiko Stuebner
2018-07-30 22:37 ` [GIT PULL 2/2] Rockchip defconfig64 updates for 4.19 Heiko Stuebner
2018-08-01 2:15 ` Olof Johansson
2018-08-01 2:13 ` [GIT PULL 1/2] Rockchip dts64 updates for 4.19 round 2 Olof Johansson
2018-08-06 8:46 ` [GIT PULL] Rockchip dts64 updates for 4.19 round 3 Heiko Stuebner
2018-08-14 11:02 ` Heiko Stuebner
2018-08-24 15:36 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20114925.REm1YfjZS7@phil \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).