linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: grant.likely@secretlab.ca (Grant Likely)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC][PATCH 4/4] lcd: platform-lcd: Add device tree support
Date: Mon, 2 Jan 2012 00:34:06 -0700	[thread overview]
Message-ID: <20120102073406.GG13015@ponder.secretlab.ca> (raw)
In-Reply-To: <1325483675-21908-5-git-send-email-thomas.abraham@linaro.org>

On Mon, Jan 02, 2012 at 11:24:35AM +0530, Thomas Abraham wrote:
> Add device tree based initialization for Hydis hv070wsa lcd panel.
> 
> Cc: Ben Dooks <ben-linux@fluff.org>
> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
> ---
>  drivers/video/backlight/platform_lcd.c |   33 ++++++++++++++++++++++++++++++++
>  1 files changed, 33 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
> index feb4fd0..ebdddfd 100644
> --- a/drivers/video/backlight/platform_lcd.c
> +++ b/drivers/video/backlight/platform_lcd.c
> @@ -18,6 +18,8 @@
>  #include <linux/lcd.h>
>  #include <linux/slab.h>
>  #include <linux/gpio.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
>  
>  #include <video/platform_lcd.h>
>  
> @@ -81,9 +83,18 @@ static struct lcd_ops platform_lcd_ops = {
>  	.check_fb	= platform_lcd_match,
>  };
>  
> +static const struct of_device_id platform_lcd_dt_match[];
> +
>  static inline struct plat_lcd_driver_data *platform_lcd_get_driver_data(
>  			struct platform_device *pdev)
>  {
> +#ifdef CONFIG_OF
> +	if (pdev->dev.of_node) {
> +		const struct of_device_id *match;
> +		match = of_match_node(platform_lcd_dt_match, pdev->dev.of_node);
> +		return (struct plat_lcd_driver_data *)match->data;

.data is already void*; the cast should not be necessary.

> +	}
> +#endif
>  	return (struct plat_lcd_driver_data *)
>  			platform_get_device_id(pdev)->driver_data;
>  }
> @@ -167,6 +178,19 @@ static int lcd_hv070wsa_init(struct platform_lcd *plcd)
>  	struct plat_lcd_hydis_hv070wsa_pdata *pdata = plcd->lcd_pdata;
>  	int err;
>  
> +#ifdef CONFIG_OF
> +	if (of_have_populated_dt()) {
> +		plcd->lcd_pdata = devm_kzalloc(plcd->us,
> +						sizeof(*pdata), GFP_KERNEL);
> +		if (!plcd->lcd_pdata) {
> +			dev_err(plcd->us, "mem alloc for pdata failed\n");
> +			return -ENOMEM;
> +		}
> +		pdata = plcd->lcd_pdata;
> +		pdata->gpio = of_get_gpio(plcd->us->of_node, 0);
> +	}
> +#endif
> +
>  	if (!pdata) {
>  		dev_err(plcd->us, "no platform data\n");
>  		return -EINVAL;
> @@ -214,10 +238,19 @@ static struct platform_device_id platform_lcd_driver_ids[] = {
>  };
>  MODULE_DEVICE_TABLE(platform, platform_lcd_driver_ids);
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id platform_lcd_dt_match[] = {
> +	{ .compatible = "hydis,hv070wsa", .data = (void *)HV070WSA_DRV_DATA},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, platform_lcd_dt_match);
> +#endif
> +
>  static struct platform_driver platform_lcd_driver = {
>  	.driver		= {
>  		.name	= "platform-lcd",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = of_match_ptr(platform_lcd_dt_match),
>  	},
>  	.probe		= platform_lcd_probe,
>  	.remove		= __devexit_p(platform_lcd_remove),
> -- 
> 1.6.6.rc2
> 

  reply	other threads:[~2012-01-02  7:34 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-02  5:54 [RFC][PATCH 0/4] lcd: platform-lcd: Add lcd panel and device tree support Thomas Abraham
2012-01-02  5:54 ` [RFC][PATCH 1/4] lcd: platform-lcd: Eliminate need for platform data Thomas Abraham
2012-01-02  5:54   ` [RFC][PATCH 2/4] lcd: platform-lcd: Add support for Hydis hv070wsa lcd panel Thomas Abraham
2012-01-02  5:54     ` [RFC][PATCH 3/4] ARM: Exynos: Remove platform data of platform-lcd driver Thomas Abraham
2012-01-02  5:54       ` [RFC][PATCH 4/4] lcd: platform-lcd: Add device tree support Thomas Abraham
2012-01-02  7:34         ` Grant Likely [this message]
2012-01-02 17:33           ` Thomas Abraham
2012-01-02  8:02     ` [RFC][PATCH 2/4] lcd: platform-lcd: Add support for Hydis hv070wsa lcd panel Kyungmin Park
2012-01-02 17:39       ` Thomas Abraham
2012-01-02 11:45     ` Mark Brown
2012-01-02 17:41       ` Thomas Abraham
2012-01-02 11:59   ` [RFC][PATCH 1/4] lcd: platform-lcd: Eliminate need for platform data Mark Brown
2012-01-02 17:51     ` Thomas Abraham
2012-01-02 18:13       ` Mark Brown
2012-01-03  8:26         ` Thomas Abraham
2012-01-02  6:48 ` [RFC][PATCH 0/4] lcd: platform-lcd: Add lcd panel and device tree support Olof Johansson
2012-01-02 17:31   ` Thomas Abraham
2012-01-02  7:34 ` Grant Likely
2012-01-03  9:06 ` Lars-Peter Clausen
2012-01-03 11:54   ` Thomas Abraham
2012-01-03 12:26     ` Lars-Peter Clausen
2012-01-03 17:07       ` Thomas Abraham
2012-01-03 18:36         ` Lars-Peter Clausen
2012-01-04  6:13           ` Thomas Abraham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120102073406.GG13015@ponder.secretlab.ca \
    --to=grant.likely@secretlab.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).