From: grant.likely@secretlab.ca (Grant Likely)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/10] arm/dts: OMAP4: Add i2c controller nodes
Date: Wed, 4 Jan 2012 11:13:41 -0700 [thread overview]
Message-ID: <20120104181341.GL15503@ponder.secretlab.ca> (raw)
In-Reply-To: <1323439361-1647-6-git-send-email-b-cousson@ti.com>
On Fri, Dec 09, 2011 at 03:02:36PM +0100, Benoit Cousson wrote:
> Add i2c controllers nodes into the main ocp bus.
>
> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
> ---
> arch/arm/boot/dts/omap4.dtsi | 28 ++++++++++++++++++++++++++++
> 1 files changed, 28 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index bede009..9872283 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -100,5 +100,33 @@
> reg = <0x48241000 0x1000>,
> <0x48240100 0x0100>;
> };
> +
> + i2c1: i2c at 1 {
> + compatible = "ti,omap4-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,hwmods = "i2c1";
> + };
> +
> + i2c2: i2c at 2 {
> + compatible = "ti,omap4-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,hwmods = "i2c2";
> + };
> +
> + i2c3: i2c at 3 {
> + compatible = "ti,omap4-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,hwmods = "i2c3";
> + };
> +
> + i2c4: i2c at 4 {
> + compatible = "ti,omap4-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,hwmods = "i2c4";
> + };
> };
> };
> --
> 1.7.0.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2012-01-04 18:13 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-09 14:02 [PATCH v2 00/10] OMAP4: Add DT support for i2c and twl6030 Benoit Cousson
2011-12-09 14:02 ` [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT Benoit Cousson
2012-01-04 18:04 ` Grant Likely
2011-12-09 14:02 ` [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller Benoit Cousson
2011-12-14 1:06 ` Kevin Hilman
2012-01-04 13:36 ` Cousson, Benoit
2012-01-04 18:08 ` Grant Likely
2012-01-04 21:28 ` Kevin Hilman
2012-01-04 21:56 ` Grant Likely
2011-12-14 16:58 ` Rob Herring
2011-12-15 15:05 ` Cousson, Benoit
2011-12-15 15:48 ` Rob Herring
2011-12-15 16:09 ` Cousson, Benoit
2011-12-22 8:22 ` Shubhrajyoti
2011-12-09 14:02 ` [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030 Benoit Cousson
2011-12-19 12:03 ` Samuel Ortiz
2011-12-19 13:53 ` Cousson, Benoit
2012-01-04 18:12 ` Grant Likely
2012-01-05 10:21 ` Cousson, Benoit
2011-12-09 14:02 ` [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030 Benoit Cousson
2011-12-19 16:52 ` Cousson, Benoit
2011-12-26 1:18 ` Alessandro Zummo
2011-12-20 15:13 ` Cousson, Benoit
2012-01-04 18:13 ` Grant Likely
2011-12-09 14:02 ` [PATCH v2 05/10] arm/dts: OMAP4: Add i2c controller nodes Benoit Cousson
2012-01-04 18:13 ` Grant Likely [this message]
2011-12-09 14:02 ` [PATCH v2 06/10] arm/dts: OMAP3: " Benoit Cousson
2012-01-04 18:14 ` Grant Likely
2011-12-09 14:02 ` [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM Benoit Cousson
2011-12-14 5:06 ` Kevin Hilman
2011-12-14 16:50 ` Cousson, Benoit
2011-12-15 0:31 ` Kevin Hilman
2012-01-04 18:14 ` Grant Likely
2011-12-09 14:02 ` [PATCH v2 08/10] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices Benoit Cousson
2012-01-04 18:14 ` Grant Likely
2011-12-09 14:02 ` [PATCH v2 09/10] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM Benoit Cousson
2012-01-04 18:15 ` Grant Likely
2012-01-09 23:24 ` Tabi Timur-B04825
2012-01-10 10:09 ` Cousson, Benoit
2011-12-09 14:02 ` [PATCH v2 10/10] ARM: OMAP2+: board-generic: Remove i2c static init Benoit Cousson
2012-01-04 18:15 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120104181341.GL15503@ponder.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).