From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2 v3] V4L: atmel-isi: add code to enable/disable ISI_MCK clock
Date: Thu, 5 Jan 2012 17:09:13 +0000 [thread overview]
Message-ID: <20120105170913.GC11810@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <Pine.LNX.4.64.1201051752220.23644@axis700.grange>
clk_prepare/clk_unprepare?
On Thu, Jan 05, 2012 at 05:55:17PM +0100, Guennadi Liakhovetski wrote:
> From: Josh Wu <josh.wu@atmel.com>
>
> This patch
> - add ISI_MCK clock enable/disable code.
> - change field name in isi_platform_data structure
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
> [g.liakhovetski at gmx.de: fix label names]
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
> ---
>
> Arnd, please, pull this patch via your tree to avoid having to wait for
> the V4L tree, Mauro has acked it.
>
> drivers/media/video/atmel-isi.c | 31 +++++++++++++++++++++++++++++--
> include/media/atmel-isi.h | 4 +++-
> 2 files changed, 32 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
> index b25bd7b..9fe4519 100644
> --- a/drivers/media/video/atmel-isi.c
> +++ b/drivers/media/video/atmel-isi.c
> @@ -90,7 +90,10 @@ struct atmel_isi {
> struct isi_dma_desc dma_desc[MAX_BUFFER_NUM];
>
> struct completion complete;
> + /* ISI peripherial clock */
> struct clk *pclk;
> + /* ISI_MCK, feed to camera sensor to generate pixel clock */
> + struct clk *mck;
> unsigned int irq;
>
> struct isi_platform_data *pdata;
> @@ -766,6 +769,12 @@ static int isi_camera_add_device(struct soc_camera_device *icd)
> if (ret)
> return ret;
>
> + ret = clk_enable(isi->mck);
> + if (ret) {
> + clk_disable(isi->pclk);
> + return ret;
> + }
> +
> isi->icd = icd;
> dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n",
> icd->devnum);
> @@ -779,6 +788,7 @@ static void isi_camera_remove_device(struct soc_camera_device *icd)
>
> BUG_ON(icd != isi->icd);
>
> + clk_disable(isi->mck);
> clk_disable(isi->pclk);
> isi->icd = NULL;
>
> @@ -874,7 +884,7 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd)
>
> if (isi->pdata->has_emb_sync)
> cfg1 |= ISI_CFG1_EMB_SYNC;
> - if (isi->pdata->isi_full_mode)
> + if (isi->pdata->full_mode)
> cfg1 |= ISI_CFG1_FULL_MODE;
>
> isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
> @@ -912,6 +922,7 @@ static int __devexit atmel_isi_remove(struct platform_device *pdev)
> isi->fb_descriptors_phys);
>
> iounmap(isi->regs);
> + clk_put(isi->mck);
> clk_put(isi->pclk);
> kfree(isi);
>
> @@ -930,7 +941,7 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
> struct isi_platform_data *pdata;
>
> pdata = dev->platform_data;
> - if (!pdata || !pdata->data_width_flags) {
> + if (!pdata || !pdata->data_width_flags || !pdata->mck_hz) {
> dev_err(&pdev->dev,
> "No config available for Atmel ISI\n");
> return -EINVAL;
> @@ -959,6 +970,19 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
> INIT_LIST_HEAD(&isi->video_buffer_list);
> INIT_LIST_HEAD(&isi->dma_desc_head);
>
> + /* Get ISI_MCK, provided by programmable clock or external clock */
> + isi->mck = clk_get(dev, "isi_mck");
> + if (IS_ERR(isi->mck)) {
> + dev_err(dev, "Failed to get isi_mck\n");
> + ret = PTR_ERR(isi->mck);
> + goto err_clk_get;
> + }
> +
> + /* Set ISI_MCK's frequency, it should be faster than pixel clock */
> + ret = clk_set_rate(isi->mck, pdata->mck_hz);
> + if (ret < 0)
> + goto err_set_mck_rate;
> +
> isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
> sizeof(struct fbd) * MAX_BUFFER_NUM,
> &isi->fb_descriptors_phys,
> @@ -1034,6 +1058,9 @@ err_alloc_ctx:
> isi->p_fb_descriptors,
> isi->fb_descriptors_phys);
> err_alloc_descriptors:
> +err_set_mck_rate:
> + clk_put(isi->mck);
> +err_clk_get:
> kfree(isi);
> err_alloc_isi:
> clk_put(pclk);
> diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
> index 26cece5..6568230 100644
> --- a/include/media/atmel-isi.h
> +++ b/include/media/atmel-isi.h
> @@ -110,10 +110,12 @@ struct isi_platform_data {
> u8 hsync_act_low;
> u8 vsync_act_low;
> u8 pclk_act_falling;
> - u8 isi_full_mode;
> + u8 full_mode;
> u32 data_width_flags;
> /* Using for ISI_CFG1 */
> u32 frate;
> + /* Using for ISI_MCK */
> + u32 mck_hz;
> };
>
> #endif /* __ATMEL_ISI_H__ */
> --
> 1.7.2.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2012-01-05 17:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-15 14:25 [GIT PULL] at91: devices and boards files update for 3.3 Nicolas Ferre
2011-12-16 7:06 ` Olof Johansson
2011-12-16 16:37 ` Nicolas Ferre
2011-12-16 21:03 ` Olof Johansson
2011-12-17 18:34 ` Guennadi Liakhovetski
2011-12-17 23:42 ` Olof Johansson
2011-12-18 0:08 ` Guennadi Liakhovetski
2011-12-20 4:32 ` Olof Johansson
2012-01-03 10:49 ` Nicolas Ferre
2012-01-03 10:59 ` Guennadi Liakhovetski
2012-01-05 16:55 ` [PATCH 1/2 v3] V4L: atmel-isi: add code to enable/disable ISI_MCK clock Guennadi Liakhovetski
2012-01-05 17:09 ` Russell King - ARM Linux [this message]
2012-01-05 17:15 ` Nicolas Ferre
2012-01-05 17:21 ` Guennadi Liakhovetski
2012-01-06 5:49 ` Wu, Josh
[not found] ` <4F02E1B9.30009@atmel.com>
2012-01-03 21:39 ` [GIT PULL v2] at91: devices and boards files update for 3.3 Arnd Bergmann
2012-01-04 9:20 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120105170913.GC11810@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).