From mboxrd@z Thu Jan 1 00:00:00 1970 From: u.kleine-koenig@pengutronix.de (Uwe =?iso-8859-1?Q?Kleine-K=F6nig?=) Date: Wed, 11 Jan 2012 09:12:31 +0100 Subject: [PATCH V2 2/4] CS89x0 : add CS89x0 platform device to the iMX21ADS board In-Reply-To: <1326237255-23630-1-git-send-email-jaccon.bastiaansen@gmail.com> References: <1326237255-23630-1-git-send-email-jaccon.bastiaansen@gmail.com> Message-ID: <20120111081231.GK14252@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello, On Wed, Jan 11, 2012 at 12:14:15AM +0100, Jaccon Bastiaansen wrote: > Add CS89x0 networking support to the iMX21ADS board by using the > platform driver support in the CS89x0 driver. > > Signed-off-by: Jaccon Bastiaansen > --- > arch/arm/configs/imx_v4_v5_defconfig | 2 ++ > arch/arm/mach-imx/mach-mx21ads.c | 25 ++++++++++++++++++++++--- > 2 files changed, 24 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig > index 11a4192..fc0106f 100644 > --- a/arch/arm/configs/imx_v4_v5_defconfig > +++ b/arch/arm/configs/imx_v4_v5_defconfig > @@ -81,6 +81,8 @@ CONFIG_NET_ETHERNET=y > CONFIG_SMC91X=y > CONFIG_DM9000=y > CONFIG_SMC911X=y > +CONFIG_CS89x0=y > +CONFIG_CS89x0_PLATFORM=y > # CONFIG_NETDEV_1000 is not set > # CONFIG_NETDEV_10000 is not set > # CONFIG_INPUT_MOUSEDEV is not set > diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c > index 25f8402..faefdf8 100644 > --- a/arch/arm/mach-imx/mach-mx21ads.c > +++ b/arch/arm/mach-imx/mach-mx21ads.c > @@ -38,7 +38,6 @@ > (MX21ADS_MMIO_BASE_ADDR + (offset)) > > #define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) > -#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) > #define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) > #define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) > #define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) > @@ -159,6 +158,26 @@ static struct platform_device mx21ads_nor_mtd_device = { > .resource = &mx21ads_flash_resource, > }; > > +static struct resource mx21ads_cs8900_resources[] = { > + { > + .start = MX21_CS1_BASE_ADDR, > + .end = MX21_CS1_BASE_ADDR + 0x200000 - 1, > + .flags = IORESOURCE_MEM, > + }, > + { > + .start = MX21ADS_CS8900A_IRQ, > + .end = MX21ADS_CS8900A_IRQ, > + .flags = IORESOURCE_IRQ, > + } > +}; > + > +static struct platform_device mx21ads_cs8900_device = { > + .name = "cs89x0", > + .id = 0, > + .num_resources = ARRAY_SIZE(mx21ads_cs8900_resources), > + .resource = mx21ads_cs8900_resources > +}; > + Nowadays we prefer dynamic initialisation over static structs. (A struct platform_device takes 300 and a few bytes IIRC and just occupies memory if you boot a machine different from mx21ads.) So the right incantation is: static const struct resource mx21ads_cs8900_resources[] __initconst = { ... }; static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = { .name = "cs89x0", .id = 0; .res = mx21ads_cs8900_resources, .num_res = ARRAY_SIZE(mx21ads_cs8900_resources), }; platform_device_register_full(&mx21ads_cs8900_devinfo); > static const struct imxuart_platform_data uart_pdata_rts __initconst = { > .flags = IMXUART_HAVE_RTSCTS, > }; > @@ -254,14 +273,13 @@ mx21ads_nand_board_info __initconst = { > static struct map_desc mx21ads_io_desc[] __initdata = { > /* > * Memory-mapped I/O on MX21ADS Base board: > - * - CS8900A Ethernet controller > * - ST16C2552CJ UART > * - CPU and Base board version > * - Base board I/O register > */ > { > .virtual = MX21ADS_MMIO_BASE_ADDR, > - .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR), > + .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR + 0x200000), > .length = MX21ADS_MMIO_SIZE, > .type = MT_DEVICE, > }, Maybe add a comment here why an offset is used here and maybe use a nice #define for it instead of a bare number. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |