From mboxrd@z Thu Jan  1 00:00:00 1970
From: marek.vasut@gmail.com (Marek Vasut)
Date: Tue, 31 Jan 2012 12:34:52 +0100
Subject: [PATCH v3] mtd/gpmi : add BBT support to gpmi nand driver
In-Reply-To: <1328008316-27258-1-git-send-email-b32955@freescale.com>
References: <1328008316-27258-1-git-send-email-b32955@freescale.com>
Message-ID: <201201311234.52988.marek.vasut@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

> Add a new field to gpmi_nand_platform_data{}.
> Make the BBT support to board specific.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>
> ---
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c |    2 ++
>  include/linux/mtd/gpmi-nand.h          |    2 ++
>  2 files changed, 4 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 493ec2f..4d369df 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -1493,6 +1493,8 @@ static int __devinit gpmi_nfc_init(struct
> gpmi_nand_data *this) chip->ecc.mode		= NAND_ECC_HW;
>  	chip->ecc.size		= 1;
>  	chip->ecc.layout	= &gpmi_hw_ecclayout;
> +	if (pdata->enable_bbt)
> +		chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
> 
>  	/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
>  	this->bch_geometry.payload_size = 1024;
> diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
> index 69b6dbf..04ab366 100644
> --- a/include/linux/mtd/gpmi-nand.h
> +++ b/include/linux/mtd/gpmi-nand.h
> @@ -51,6 +51,7 @@
>   * @partitions:              An optional pointer to an array of partition
>   *                           descriptions.
>   * @partition_count:         The number of elements in the partitions
> array. + * @enable_bbt:              Enable the BBT or not.
>   */
>  struct gpmi_nand_platform_data {
>  	/* SoC hardware information. */
> @@ -64,5 +65,6 @@ struct gpmi_nand_platform_data {
>  	/* Medium information. */
>  	struct		mtd_partition *partitions;
>  	unsigned	partition_count;
> +	unsigned int	enable_bbt:1;
>  };
>  #endif

Hi, we also need one more fix here /wrt subpage writes,
See: "GPMI-NAND: Wrong ECC size in driver" email.

Otherwise, this seems ok.

M