[PATCH 1/8] ARM: OMAP2+: Move DISPC L3 firewall to happen in omap_display_init()

[tony@atomide.com (Tony Lindgren)]

* Tony Lindgren <tony@atomide.com> [120222 10:34]:
> * Tomi Valkeinen <tomi.valkeinen@ti.com> [120221 23:38]:
> > Hi,
> > 
> > On Tue, 2012-02-21 at 15:40 -0800, Tony Lindgren wrote:
> > > Otherwise we cannot move most of plat/io.h to be a local
> > > iomap.h for mach-omap2.
> > > 
> > > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > > Cc: linux-fbdev at vger.kernel.org
> > > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > > ---
> > >  arch/arm/mach-omap2/display.c   |    3 +++
> > >  drivers/video/omap2/dss/dispc.c |    5 -----
> > >  2 files changed, 3 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
> > > index 3677b1f..5a7f12f 100644
> > > --- a/arch/arm/mach-omap2/display.c
> > > +++ b/arch/arm/mach-omap2/display.c
> > > @@ -191,6 +191,9 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
> > >  	memset(&pdata, 0, sizeof(pdata));
> > >  
> > >  	if (cpu_is_omap24xx()) {
> > > +		/* L3 firewall setting: enable access to OCM RAM */
> > > +		__raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0));
> > > +
> > >  		curr_dss_hwmod = omap2_dss_hwmod_data;
> > >  		oh_count = ARRAY_SIZE(omap2_dss_hwmod_data);
> > >  	} else if (cpu_is_omap34xx()) {
> > > diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
> > > index e1626a1..cce0820 100644
> > > --- a/drivers/video/omap2/dss/dispc.c
> > > +++ b/drivers/video/omap2/dss/dispc.c
> > > @@ -3272,11 +3272,6 @@ static void _omap_dispc_initial_config(void)
> > >  	if (dss_has_feature(FEAT_FUNCGATED))
> > >  		REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
> > >  
> > > -	/* L3 firewall setting: enable access to OCM RAM */
> > > -	/* XXX this should be somewhere in plat-omap */
> > > -	if (cpu_is_omap24xx())
> > > -		__raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0));
> > > -
> > >  	_dispc_setup_color_conv_coef();
> > >  
> > >  	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
> > > 
> > 
> > I think the whole raw_writel line can be removed. It's been copied from
> > the old omapfb, and my understanding is that it's about using SRAM for
> > framebuffer. Using SRAM for fb is no longer supported, and I have a
> > patch set that removes the remaining SRAM code from omapfb/omapdss.
> 
> OK, I'll remove those from drivers/video/omap2/dss/dispc.c so this
> series keeps building.

Here's this one updated.

Tony


From: Tony Lindgren <tony@atomide.com>
Date: Mon, 20 Feb 2012 12:55:07 -0800
Subject: [PATCH] ARM: OMAP2+: Drop DISPC L3 firewall code

This is only needed when using SRAM for framebuffer,
and the support for SRAM framebuffer is about to get
removed.

Otherwise we cannot move most of plat/io.h to be a local
iomap.h for mach-omap2.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev at vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>

--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3272,11 +3272,6 @@ static void _omap_dispc_initial_config(void)
 	if (dss_has_feature(FEAT_FUNCGATED))
 		REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
 
-	/* L3 firewall setting: enable access to OCM RAM */
-	/* XXX this should be somewhere in plat-omap */
-	if (cpu_is_omap24xx())
-		__raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0));
-
 	_dispc_setup_color_conv_coef();
 
 	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);