From: grant.likely@secretlab.ca (Grant Likely)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] spi/atmel: add DT support
Date: Fri, 02 Mar 2012 19:39:29 -0700 [thread overview]
Message-ID: <20120303023929.BE8F93E2D8D@localhost> (raw)
In-Reply-To: <1328804077-6121-3-git-send-email-plagnioj@jcrosoft.com>
On Thu, 9 Feb 2012 17:14:37 +0100, Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> wrote:
> the atmel_spi use only gpio for chip select
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> Cc: devicetree-discuss at lists.ozlabs.org
> Cc: spi-devel-general at lists.sourceforge.net
Looks good to me; applied.
g.
> ---
> .../devicetree/bindings/spi/spi_atmel.txt | 6 ++++++
> drivers/spi/spi-atmel.c | 12 +++++++++++-
> 2 files changed, 17 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/spi/spi_atmel.txt
>
> diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> new file mode 100644
> index 0000000..7ec3d8d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> @@ -0,0 +1,6 @@
> +Atmel SPI device
> +
> +Required properties:
> +- compatible : should be "atmel,at91rm9200-spi".
> +- reg: Address and length of the register set for the device
> +- interrupts: Should contain macb interrupt
> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
> index 16d6a83..7bcd11f 100644
> --- a/drivers/spi/spi-atmel.c
> +++ b/drivers/spi/spi-atmel.c
> @@ -19,6 +19,7 @@
> #include <linux/interrupt.h>
> #include <linux/spi/spi.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
>
> #include <asm/io.h>
> #include <mach/board.h>
> @@ -938,7 +939,7 @@ static int __devinit atmel_spi_probe(struct platform_device *pdev)
> master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
>
> master->bus_num = pdev->id;
> - master->num_chipselect = 4;
> + master->num_chipselect = master->dev.of_node ? 0 : 4;
> master->setup = atmel_spi_setup;
> master->transfer = atmel_spi_transfer;
> master->cleanup = atmel_spi_cleanup;
> @@ -1064,11 +1065,20 @@ static int atmel_spi_resume(struct platform_device *pdev)
> #define atmel_spi_resume NULL
> #endif
>
> +#if defined(CONFIG_OF)
> +static const struct of_device_id atmel_spi_dt_ids[] = {
> + { .compatible = "atmel,at91rm9200-spi" },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, atmel_spi_dt_ids);
> +#endif
>
> static struct platform_driver atmel_spi_driver = {
> .driver = {
> .name = "atmel_spi",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(atmel_spi_dt_ids),
> },
> .suspend = atmel_spi_suspend,
> .resume = atmel_spi_resume,
> --
> 1.7.7
>
>
> ------------------------------------------------------------------------------
> Virtualization & Cloud Management Using Capacity Planning
> Cloud computing makes use of virtualization - but cloud computing
> also focuses on allowing computing to be delivered as a service.
> http://www.accelacomm.com/jaw/sfnl/114/51521223/
> _______________________________________________
> spi-devel-general mailing list
> spi-devel-general at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/spi-devel-general
--
email sent from notmuch.vim plugin
next prev parent reply other threads:[~2012-03-03 2:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-09 16:14 [PATCH 1/3] spi: move master of_node init to spi_alloc_master Jean-Christophe PLAGNIOL-VILLARD
2012-02-09 16:14 ` [PATCH 2/3] of_spi: add generic binding support to specify ncs gpio Jean-Christophe PLAGNIOL-VILLARD
2012-02-14 4:24 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-20 9:56 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-09 16:14 ` [PATCH 3/3] spi/atmel: add DT support Jean-Christophe PLAGNIOL-VILLARD
2012-03-03 2:39 ` Grant Likely [this message]
2012-03-03 3:46 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120303023929.BE8F93E2D8D@localhost \
--to=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox