From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@opensource.wolfsonmicro.com (Mark Brown) Date: Tue, 6 Mar 2012 12:02:47 +0000 Subject: [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver In-Reply-To: <20120306073900.GP16232@S2101-09.ap.freescale.net> References: <1330957865-19085-1-git-send-email-shawn.guo@linaro.org> <1330957865-19085-18-git-send-email-shawn.guo@linaro.org> <20120305144601.GQ3224@opensource.wolfsonmicro.com> <20120306073900.GP16232@S2101-09.ap.freescale.net> Message-ID: <20120306120247.GF19635@opensource.wolfsonmicro.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Mar 06, 2012 at 03:39:02PM +0800, Shawn Guo wrote: > On Mon, Mar 05, 2012 at 02:46:01PM +0000, Mark Brown wrote: > > This you can just set in the card struct, no need for explicit code at > > all. > Yes, I just tried. It also works but a little bit differently. We > only set_fmt for codec_dai here, while ASoC core will set_fmt for both > codec_dai and cpu_dai if dai_link->dai_fmt is set. However, the > fsl_ssi does not provide .set_fmt implementation, and consequently we > will see error message below, which does not impact functionality > though. > fsl-ssi-dai 83fcc000.ssi: Failed to set DAI format: -22 > I hope we keep the code as it is now and improve later when fsl_ssi > gets improved. No, we should fix the core to work better in this case - not having a DAI operation is perfectly normal and should be supported. > > > + ret = of_property_read_u32(np, "fsl,mux-int-port", &int_port); > > > + ret = of_property_read_u32(np, "fsl,mux-ext-port", &ext_port); > > It seems very odd to have namespacing on the individual property names. > > Why are you doing that? The properties are already defined in terms of > > the device binding. Though everyone else is doing it so not really a > > problem. > The general device tree binding practice is we'd better have a vendor > prefix on the property name, if the property applies on specific vendor > drivers instead of common ones across different vendors. There's nothing generic about this device, it only applies to a specific combination of things and in so far as it applies to those the properties are generic - any board combining i.MX and this CODEC is going to have an audmux. > > > + /* > > > + * The port numbering in the hardware manual starts at 1, while > > > + * the audmux API expects it starts at 0. > > > + */ > > > + int_port--; > > > + ext_port--; > > Should have error checking somewhere to make sure that the user > > remembered this. > Because different i.MX SoC may have different internal and external > port number, I do not think of a way to check that. And I would not In that case the audmux code should be validating the arguments. > worry about it that much, since all the hardware documents number the > port from 1, while device tree user/author will have to look at those > documents for the data. OTOH the in kernel API uses a different numbering and if the user is porting their existing code over to device tree... > > > + imx_audmux_v2_configure_port(int_port, > > > + IMX_AUDMUX_V2_PTCR_SYN | > > > + IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) | > > > + IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) | > > > + IMX_AUDMUX_V2_PTCR_TFSDIR | > > > + IMX_AUDMUX_V2_PTCR_TCLKDIR, > > > + IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port)); > > I'm not sure we've really gained much from converting to a platform > > driver given that the device just registers something globally... > Converting audmux to a platform driver does not change anything about > that. It makes device tree support easier, and gets the audmux users > (imx machine drivers) stay away from including . It's not actually fixed anything in the APIs though and we've now also got a race in the driver probes since the audmux now need to come up via the device model instead of just being there - we could try to configure the audmux with no platform driver bound. We should really have the audmux as at least an aux_dev in the card to make sure it's there. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: