[GIT PULL v4] ARM: kirkwood: fdt conversion progress

Jason
2012-03-08T18:07:12Z

On Thu, Mar 08, 2012 at 09:53:06AM -0800, Olof Johansson wrote:
> On Thu, Mar 8, 2012 at 9:30 AM, Jason <jason@lakedaemon.net> wrote:
> > The following patches should be fine to merge into stable (for 3.4):
> >
> > af42511 ARM: orion: spi: remove enable_clock_fix which is not used
> > d93b2ca ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.
> > 2bb9207 ARM: kirkwood: fdt: use mrvl ticker symbol
> > ec0ec68 ARM: kirkwood: fdt: absorb kirkwood_init()
> > ...
> > b5c25c3 ARM: kirkwood: rtc-mv devicetree bindings
> > 5e40593 ARM: kirkwood: use devicetree for rtc-mv
> > ...
>
> Excellent. Can you build up one or more stable branches that I can
> pull those from?

Here's the pull request for stable:

The following changes since commit d65b4e98d7ea3038b767b70fe8be959b2913f16d:

Linux 3.3-rc3 (2012-02-08 19:21:53 -0800)

are available in the git repository at:
git://git.infradead.org/users/jcooper/linux-kirkwood.git kirkwood_dt_stable

Andrew Lunn (2):
ARM: orion: spi: remove enable_clock_fix which is not used
ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.

Jason Cooper (6):
ARM: kirkwood: add dreamplug (fdt) support.
ARM: kirkwood: convert uart0 to devicetree.
ARM: kirkwood: fdt: use mrvl ticker symbol
ARM: kirkwood: fdt: absorb kirkwood_init()
ARM: kirkwood: rtc-mv devicetree bindings
ARM: kirkwood: use devicetree for rtc-mv

arch/arm/boot/dts/kirkwood-dreamplug.dts | 25 ++++
arch/arm/boot/dts/kirkwood.dtsi | 12 ++
arch/arm/mach-kirkwood/Kconfig | 14 ++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/Makefile.boot | 2 +
arch/arm/mach-kirkwood/board-dt.c | 206 ++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/common.c | 11 +-
arch/arm/mach-kirkwood/common.h | 7 +
arch/arm/plat-orion/include/plat/audio.h | 1 -
drivers/rtc/rtc-mv.c | 9 ++
drivers/spi/spi-orion.c | 5 -
include/linux/spi/orion_spi.h | 1 -
12 files changed, 281 insertions(+), 13 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-dreamplug.dts
create mode 100644 arch/arm/boot/dts/kirkwood.dtsi
create mode 100644 arch/arm/mach-kirkwood/board-dt.c

thx,

Jason.