[PATCH 10/12] ARM: OMAP3: hwmod data: fix IVA interface clock

[paul@pwsan.com (Paul Walmsley)]

The OMAP3 hwmod data listed iva2_ck as an interface clock between the
IVA and L3.  This is incorrect.  iva2_ck is not an interface clock.
Since it cannot auto-idle, specifying it here prevents the IVA and at
least one of the CORE clockdomains from going idle, which causes PM
problems such as these upon system suspend:

[   70.626129] Powerdomain (iva2_pwrdm) didn't enter target state 1
[   70.626190] Powerdomain (core_pwrdm) didn't enter target state 1

Fix by specifying the actual interface clock in the hwmod data.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 3b245e9..c05a445 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2325,7 +2325,7 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = {
 static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
 	.master		= &omap3xxx_l3_main_hwmod,
 	.slave		= &omap3xxx_iva_hwmod,
-	.clk		= "iva2_ck",
+	.clk		= "core_l3_ick",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };