From: zengzm.kernel@gmail.com (Zeng Zhaoming)
To: linux-arm-kernel@lists.infradead.org
Subject: [alsa-devel] [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias
Date: Wed, 28 Mar 2012 18:11:17 +0800 [thread overview]
Message-ID: <20120328101117.GA2940@zzm-ubuntu> (raw)
In-Reply-To: <7FE21149F4667147B645348EC605788514EDFF@039-SN2MPN1-011.039d.mgd.msft.net>
On Wed 2012-03-28 09:52:15, Dong Aisheng-B29396 wrote:
> > -----Original Message-----
> > From: alsa-devel-bounces at alsa-project.org [mailto:alsa-devel-
> > bounces at alsa-project.org] On Behalf Of Shawn Guo
> > Sent: Wednesday, March 28, 2012 3:31 PM
> > To: alsa-devel at alsa-project.org
> > Cc: Xu Lionel-R63889; Mark Brown; Zeng at alsa-project.org; Zhaoming; Shawn
> > Guo; Xu Lionel-R63889; linux-arm-kernel at lists.infradead.org
> > Subject: [alsa-devel] [PATCH] ASoC: sgtl5000: fix power on/off of MIC
> > bias
> >
> > From: Lionel Xu <Lionel.Xu@freescale.com>
> >
> > There is no sound in the recorded wav, to enable recording, the VAG
> > should be powered up, and the mic bias resistor should be set up with
> > proper value.
> >
> > Signed-off-by: Lionel Xu <lionel.xu@freescale.com>
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Zeng Zhaoming <zengzm.kernel@gmail.com>
> > ---
> > sound/soc/codecs/sgtl5000.c | 14 +++++++++++---
> > 1 files changed, 11 insertions(+), 3 deletions(-)
> >
> > diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
> > index d192626..a24299c 100644
> > --- a/sound/soc/codecs/sgtl5000.c
> > +++ b/sound/soc/codecs/sgtl5000.c
> > @@ -132,11 +132,18 @@ static int mic_bias_event(struct
> > snd_soc_dapm_widget *w,
> > snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
> > SGTL5000_BIAS_R_MASK,
> > SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT);
> > +
> > + snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
> > + SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
> Did you test line-in record?
> IIRC for line-in record, it may also need VAG_POWER up.
> Then only enable VAG_POWER for mic_bias_event may not be sufficient.
> Will verify it latter when I'm free.
>
Yes, if mic bias needs VAG powerup, LINE-IN capture has the same issue.
But I remember Line-out test passed in mx28, it there any defect I ignored?
Thanks.
Zeng Zhaoming
> Regards
> Dong Aisheng
>
> > break;
> >
> > case SND_SOC_DAPM_PRE_PMD:
> > snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
> > - SGTL5000_BIAS_R_MASK, 0);
> > + SGTL5000_BIAS_R_MASK,
> > + SGTL5000_BIAS_R_off << SGTL5000_BIAS_R_SHIFT);
> > +
> > + snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
> > + SGTL5000_VAG_POWERUP, 0);
> > break;
> > }
> > return 0;
> > @@ -197,7 +204,7 @@ static const struct snd_soc_dapm_widget
> > sgtl5000_dapm_widgets[] = {
> > SND_SOC_DAPM_OUTPUT("HP_OUT"),
> > SND_SOC_DAPM_OUTPUT("LINE_OUT"),
> >
> > - SND_SOC_DAPM_MICBIAS_E("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
> > + SND_SOC_DAPM_MICBIAS_E("Mic Bias", SND_SOC_NOPM, 0, 0,
> > mic_bias_event,
> > SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
> >
> > @@ -229,7 +236,8 @@ static const struct snd_soc_dapm_widget
> > sgtl5000_dapm_widgets[] = {
> > /* routes for sgtl5000 */
> > static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = {
> > {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
> > - {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
> > + {"Mic Bias", NULL, "MIC_IN"}, /* mic_in --> mic bias */
> > + {"Capture Mux", "MIC_IN", "Mic Bias"}, /* mic bias --> adc_mux
> > */
> >
> > {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
> > {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
> > --
> > 1.7.4.1
> >
> >
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel at alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2012-03-28 10:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-28 7:30 [PATCH] ASoC: sgtl5000: fix power on/off of MIC bias Shawn Guo
2012-03-28 9:05 ` Zeng Zhaoming
2012-03-28 9:52 ` [alsa-devel] " Dong Aisheng-B29396
2012-03-28 10:11 ` Zeng Zhaoming [this message]
2012-03-28 11:17 ` Xu Lionel-R63889
2012-03-28 14:18 ` Shawn Guo
2012-03-28 14:36 ` Mark Brown
2012-03-28 9:58 ` Dong Aisheng
2012-03-29 5:56 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120328101117.GA2940@zzm-ubuntu \
--to=zengzm.kernel@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).