[PATCH 1/3] ARM: mx28: Register SPI clocks

[PATCH 1/3] ARM: mx28: Register SPI clocks

[Fabio Estevam]

Register SPI clocks.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/mach-mxs/clock-mx28.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index cea29c9..add79a0 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -648,6 +648,10 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
 	_REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
 	_REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
+	_REGISTER_CLOCK("mxs-spi.0", NULL, ssp0_clk)
+	_REGISTER_CLOCK("mxs-spi.1", NULL, ssp1_clk)
+	_REGISTER_CLOCK("mxs-spi.2", NULL, ssp2_clk)
+	_REGISTER_CLOCK("mxs-spi.3", NULL, ssp3_clk)
 };
 
 static int clk_misc_init(void)
-- 
1.7.1

[PATCH 2/3] ARM: mx28: Add SPI resources

[Fabio Estevam]

Add SPI resources.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/mach-mxs/devices-mx28.h                |    4 +
 arch/arm/mach-mxs/devices/Kconfig               |    3 +
 arch/arm/mach-mxs/devices/Makefile              |    1 +
 arch/arm/mach-mxs/devices/platform-mxs-spi.c    |   74 +++++++++++++++++++++++
 arch/arm/mach-mxs/include/mach/devices-common.h |   11 ++++
 5 files changed, 93 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-mxs/devices/platform-mxs-spi.c

diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 9dbeae1..9b9206d 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -55,3 +55,7 @@ extern const struct mxs_saif_data mx28_saif_data[] __initconst;
 	mxs_add_saif(&mx28_saif_data[id], pdata)
 
 struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
+
+extern const struct mxs_mxs_spi_data mx28_mxs_spi_data[] __initconst;
+#define mx28_add_mxs_spi(id) \
+		mxs_add_mxs_spi(&mx28_mxs_spi_data[id])
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index b8913df..8ba5fca 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -30,5 +30,8 @@ config MXS_HAVE_PLATFORM_MXSFB
 config MXS_HAVE_PLATFORM_MXS_SAIF
 	bool
 
+config MXS_HAVE_PLATFORM_MXS_SPI
+	bool
+
 config MXS_HAVE_PLATFORM_RTC_STMP3XXX
 	bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index c8f5c95..1664049 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -11,3 +11,4 @@ obj-y += platform-gpio-mxs.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SPI) += platform-mxs-spi.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-spi.c b/arch/arm/mach-mxs/devices/platform-mxs-spi.c
new file mode 100644
index 0000000..b9e78d3
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-spi.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_mxs_spi_data_entry_single(soc, _id, hwid)			\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _SSP ## hwid ## _BASE_ADDR,		\
+		.dma = soc ## _DMA_SSP ## hwid,				\
+		.irq_err = soc ## _INT_SSP ## hwid ## _ERROR,		\
+		.irq_dma = soc ## _INT_SSP ## hwid ## _DMA,		\
+	}
+
+#define mxs_mxs_spi_data_entry(soc, _id, hwid)				\
+	[_id] = mxs_mxs_spi_data_entry_single(soc, _id, hwid)
+
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_mxs_spi_data mx23_mxs_spi_data[] __initconst = {
+	mxs_mxs_spi_data_entry(MX23, 0, 1),
+	mxs_mxs_spi_data_entry(MX23, 1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_mxs_spi_data mx28_mxs_spi_data[] __initconst = {
+	mxs_mxs_spi_data_entry(MX28, 0, 0),
+	mxs_mxs_spi_data_entry(MX28, 1, 1),
+	mxs_mxs_spi_data_entry(MX28, 2, 2),
+	mxs_mxs_spi_data_entry(MX28, 3, 3),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_spi(
+		const struct mxs_mxs_spi_data *data)
+{
+	struct resource res[] = {
+		{
+			.start	= data->iobase,
+			.end	= data->iobase + SZ_8K - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= data->dma,
+			.end	= data->dma,
+			.flags	= IORESOURCE_DMA,
+		}, {
+			.start	= data->irq_err,
+			.end	= data->irq_err,
+			.flags	= IORESOURCE_IRQ,
+		}, {
+			.start	= data->irq_dma,
+			.end	= data->irq_dma,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("mxs-spi", data->id,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index f2e3839..2bb1d9e 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -116,3 +116,14 @@ struct mxs_saif_data {
 struct platform_device *__init mxs_add_saif(
 		const struct mxs_saif_data *data,
 		const struct mxs_saif_platform_data *pdata);
+
+/* spi */
+struct mxs_mxs_spi_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t dma;
+	resource_size_t irq_err;
+	resource_size_t irq_dma;
+};
+struct platform_device *__init mxs_add_mxs_spi(
+		const struct mxs_mxs_spi_data *data);
-- 
1.7.1

[PATCH 3/3] ARM: mx28evk: Add SPI NOR flash support

[Fabio Estevam]

Add SPI NOR flash support.

By default, the mx28evk board does not come with a SPI NOR flash populated.

Soldered a sst25vf016b and tested it using mtd-utils.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
I will submit the spi-mxs driver in a day or so.

 arch/arm/mach-mxs/Kconfig        |    1 +
 arch/arm/mach-mxs/mach-mx28evk.c |   20 ++++++++++++++++++++
 2 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index c57f996..8078fbe 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -52,6 +52,7 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_MXSFB
 	select MXS_HAVE_PLATFORM_MXS_SAIF
 	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_MXS_SPI
 	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
 	select MXS_OCOTP
 	help
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index e386c14..f3bca27 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -20,6 +20,7 @@
 #include <linux/i2c.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -204,6 +205,12 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
 		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
 		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	/* SPI2 */
+	MX28_PAD_SSP2_SCK__SSP2_SCK,
+	MX28_PAD_SSP2_MOSI__SSP2_CMD,
+	MX28_PAD_SSP2_MISO__SSP2_D0,
+	MX28_PAD_SSP2_SS0__SSP2_D3 |
+		(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
 };
 
 /* led */
@@ -409,6 +416,15 @@ static const struct mxs_saif_platform_data
 	},
 };
 
+static struct spi_board_info mx28evk_spi_nor_device[] = {
+	{
+	 .modalias = "sst25vf016b",
+	 .max_speed_hz = 25000000,	/* max spi clock (SCK) speed in HZ */
+	 .bus_num = 2,
+	 .chip_select = 0,
+	},
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -454,6 +470,10 @@ static void __init mx28evk_init(void)
 	mx28_add_rtc_stmp3xxx();
 
 	gpio_led_register_device(0, &mx28evk_led_data);
+
+	mx28_add_mxs_spi(2);
+	spi_register_board_info(mx28evk_spi_nor_device,
+				ARRAY_SIZE(mx28evk_spi_nor_device));
 }
 
 static void __init mx28evk_timer_init(void)
-- 
1.7.1

[PATCH 3/3] ARM: mx28evk: Add SPI NOR flash support

[Wolfram Sang]

Hi Fabio,

On Tue, Apr 03, 2012 at 04:20:07PM -0300, Fabio Estevam wrote:
> Add SPI NOR flash support.
> 
> By default, the mx28evk board does not come with a SPI NOR flash populated.
> 
> Soldered a sst25vf016b and tested it using mtd-utils.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> I will submit the spi-mxs driver in a day or so.

\o/ Looking forward to that one!

However, I think this patch should include registering the spi-device as well?

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120403/5c2522cd/attachment.sig>

[PATCH 3/3] ARM: mx28evk: Add SPI NOR flash support

[Fabio Estevam]

Hi Wolfram,

On Tue, Apr 3, 2012 at 4:26 PM, Wolfram Sang <w.sang@pengutronix.de> wrote:

> However, I think this patch should include registering the spi-device as well?

It does register it by doing: mx28_add_mxs_spi(2);

Regards,

Fabio Estevam

[PATCH 3/3] ARM: mx28evk: Add SPI NOR flash support

[Wolfram Sang]

> > However, I think this patch should include registering the spi-device as well?
> 
> It does register it by doing: mx28_add_mxs_spi(2);

Doh, right!

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120403/ab67b25d/attachment.sig>

[PATCH 3/3] ARM: mx28evk: Add SPI NOR flash support

[Marek Vasut]

Dear Wolfram Sang,

> Hi Fabio,
> 
> On Tue, Apr 03, 2012 at 04:20:07PM -0300, Fabio Estevam wrote:
> > Add SPI NOR flash support.
> > 
> > By default, the mx28evk board does not come with a SPI NOR flash
> > populated.
> > 
> > Soldered a sst25vf016b and tested it using mtd-utils.
> > 
> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> > ---
> > I will submit the spi-mxs driver in a day or so.
> 
> \o/ Looking forward to that one!

Hey, did you get anywhere with this?

> However, I think this patch should include registering the spi-device as
> well?
> 
> Regards,
> 
>    Wolfram

Best regards,
Marek Vasut

[PATCH 3/3] ARM: mx28evk: Add SPI NOR flash support

[Fabio Estevam]

Hi Marek,

On Wed, Apr 18, 2012 at 6:42 PM, Marek Vasut <marek.vasut@gmail.com> wrote:

> Hey, did you get anywhere with this?

I had it working a few weeks ago, but I still need to convert it to DT.

After I convert it to DT I will post the patch.

[PATCH 2/3] ARM: mx28: Add SPI resources

[Jean-Paul]

Hi Fabio Estevam,
 I have im28 evk board and I fallowed your instructions to add the SPI resources
in my kernel. I'm using the kernel 3.2.15. After rebuilding the kernel, I still
can not see the imx28 spi drivers. Im sorry to ask these beginner questions but
I'm new in using linux spi drivers.

 I checked at these locations:
     /sys/class/spidev   and    /sys/class/spi_master
I could not see any SPI device, it was just empty.

when I do: ls /sys/bus/spi/drivers
I can see:   enc28j60 , mc33880 , mmc_spi , and spidev

How can I create a device spi node since it looks like that i don't have spi
driver for the imx28 evk board?


Thanks for your help,
Jean-Paul
 

[PATCH 2/3] ARM: mx28: Add SPI resources

[Fabio Estevam]

Hi Jean-Paul,

On Mon, May 28, 2012 at 4:25 AM, Jean-Paul <alainsergenagni@yahoo.com> wrote:
>
> Hi Fabio Estevam,
> ?I have im28 evk board and I fallowed your instructions to add the SPI resources
> in my kernel. I'm using the kernel 3.2.15. After rebuilding the kernel, I still
> can not see the imx28 spi drivers. Im sorry to ask these beginner questions but
> I'm new in using linux spi drivers.

On patch 3/3 I added the support for a SPI NOR flash.

> ?I checked at these locations:
> ? ? /sys/class/spidev ? and ? ?/sys/class/spi_master
> I could not see any SPI device, it was just empty.
>
> when I do: ls /sys/bus/spi/drivers
> I can see: ? enc28j60 , mc33880 , mmc_spi , and spidev
>
> How can I create a device spi node since it looks like that i don't have spi
> driver for the imx28 evk board?

Make sure you added the mxs spi driver I posted in the spi list and
also that you selected it in .config.

I still need to add dt support for the mxs spi driver.

Regards,

Fabio Estevam