linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv8 04/18] I2C: OMAP: I2C register restore only if context is lost
Date: Mon, 16 Apr 2012 11:13:55 -0700	[thread overview]
Message-ID: <20120416181355.GK6487@atomide.com> (raw)
In-Reply-To: <1334235995-6727-5-git-send-email-shubhrajyoti@ti.com>

* Shubhrajyoti D <shubhrajyoti@ti.com> [120412 06:10]:
>  Currently i2c register restore is done always.
>  Adding conditional restore.
>  The i2c register restore is done only if the context is lost.
>  Also remove the definition of SYSS_RESETDONE_MASK and use the
>  one in omap_hwmod.h.
> 
> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
> ---
>  arch/arm/plat-omap/i2c.c      |    3 ++
>  drivers/i2c/busses/i2c-omap.c |   52 ++++++++++++++++++++++++++--------------
>  include/linux/i2c-omap.h      |    1 +
>  3 files changed, 38 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
> index db071bc..4ccab07 100644
> --- a/arch/arm/plat-omap/i2c.c
> +++ b/arch/arm/plat-omap/i2c.c
> @@ -179,6 +179,9 @@ static inline int omap2_i2c_add_bus(int bus_id)
>  	 */
>  	if (cpu_is_omap34xx())
>  		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
> +
> +	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
> +
>  	pdev = omap_device_build(name, bus_id, oh, pdata,
>  			sizeof(struct omap_i2c_bus_platform_data),
>  			NULL, 0, 0);

This should be acked by Kevin, adding him to Cc.

For the arch/arm/plat-omap/i2c.c part:

Acked-by: Tony Lindgren <tony@atomide.com>





> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index a882558..45389db 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -43,6 +43,7 @@
>  #include <linux/slab.h>
>  #include <linux/i2c-omap.h>
>  #include <linux/pm_runtime.h>
> +#include <plat/omap_device.h>
>  
>  /* I2C controller revisions */
>  #define OMAP_I2C_OMAP1_REV_2		0x20
> @@ -157,9 +158,6 @@ enum {
>  #define OMAP_I2C_SYSTEST_SDA_I		(1 << 1)	/* SDA line sense in */
>  #define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
>  
> -/* OCP_SYSSTATUS bit definitions */
> -#define SYSS_RESETDONE_MASK		(1 << 0)
> -
>  /* OCP_SYSCONFIG bit definitions */
>  #define SYSC_CLOCKACTIVITY_MASK		(0x3 << 8)
>  #define SYSC_SIDLEMODE_MASK		(0x3 << 3)
> @@ -184,6 +182,7 @@ struct omap_i2c_dev {
>  	u32			latency;	/* maximum mpu wkup latency */
>  	void			(*set_mpu_wkup_lat)(struct device *dev,
>  						    long latency);
> +	int			(*get_context_loss_count)(struct device *dev);
>  	u32			speed;		/* Speed of bus in kHz */
>  	u32			dtrev;		/* extra revision from DT */
>  	u32			flags;
> @@ -206,6 +205,7 @@ struct omap_i2c_dev {
>  	u16			syscstate;
>  	u16			westate;
>  	u16			errata;
> +	int			dev_lost_count;
>  };
>  
>  static const u8 reg_map_ip_v1[] = {
> @@ -1025,6 +1025,7 @@ omap_i2c_probe(struct platform_device *pdev)
>  		dev->speed = pdata->clkrate;
>  		dev->flags = pdata->flags;
>  		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
> +		dev->get_context_loss_count = pdata->get_context_loss_count;
>  		dev->dtrev = pdata->rev;
>  	}
>  
> @@ -1151,12 +1152,32 @@ omap_i2c_remove(struct platform_device *pdev)
>  }
>  
>  #ifdef CONFIG_PM_RUNTIME
> +static void omap_i2c_restore(struct omap_i2c_dev *dev)
> +{
> +	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
> +	omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
> +	omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
> +	omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
> +	omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
> +	omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
> +	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
> +	/*
> +	 * Don't write to this register if the IE state is 0 as it can
> +	 * cause deadlock.
> +	 */
> +	if (dev->iestate)
> +		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
> +
> +}
>  static int omap_i2c_runtime_suspend(struct device *dev)
>  {
>  	struct platform_device *pdev = to_platform_device(dev);
>  	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
>  	u16 iv;
>  
> +	if (_dev->get_context_loss_count)
> +		_dev->dev_lost_count = _dev->get_context_loss_count(dev);
> +
>  	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
>  	if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
>  		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
> @@ -1179,24 +1200,19 @@ static int omap_i2c_runtime_resume(struct device *dev)
>  {
>  	struct platform_device *pdev = to_platform_device(dev);
>  	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
> +	int loss_cnt;
>  
> -	if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
> -		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
> -		omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
> -		omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
> -		omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
> -		omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
> -		omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
> -		omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
> -		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
> +	if (_dev->get_context_loss_count) {
> +		loss_cnt = _dev->get_context_loss_count(dev);
> +		if (loss_cnt < 0)
> +			return loss_cnt;
> +
> +		if (_dev->dev_lost_count == loss_cnt && _dev->dev_lost_count)
> +			return 0;
>  	}
>  
> -	/*
> -	 * Don't write to this register if the IE state is 0 as it can
> -	 * cause deadlock.
> -	 */
> -	if (_dev->iestate)
> -		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
> +	if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE)
> +		omap_i2c_restore(_dev);
>  
>  	return 0;
>  }
> diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
> index 92a0dc7..c76cbc0 100644
> --- a/include/linux/i2c-omap.h
> +++ b/include/linux/i2c-omap.h
> @@ -35,6 +35,7 @@ struct omap_i2c_bus_platform_data {
>  	u32		rev;
>  	u32		flags;
>  	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
> +	int		(*get_context_loss_count)(struct device *dev);
>  };
>  
>  #endif
> -- 
> 1.7.4.1
> 

  reply	other threads:[~2012-04-16 18:13 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-12 13:06 [PATCHv8 00/18] I2C Updates Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 01/18] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 02/18] I2C: OMAP: Remove reset at init Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 03/18] I2C: OMAP: Recover from Bus Busy condition Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 04/18] I2C: OMAP: I2C register restore only if context is lost Shubhrajyoti D
2012-04-16 18:13   ` Tony Lindgren [this message]
2012-04-17  5:50     ` Shubhrajyoti
2012-04-17 13:45   ` Kevin Hilman
2012-04-17 15:08     ` Shubhrajyoti Datta
2012-04-18  7:19       ` Datta, Shubhrajyoti
2012-04-18 14:08         ` Kevin Hilman
     [not found]           ` <CANQgH-af1VCutKqpq8jK1yTPHybgvnUNA3zdfQq4AYcWcJRtvA@mail.gmail.com>
2012-04-20 14:17             ` Datta, Shubhrajyoti
2012-04-12 13:06 ` [PATCHv8 05/18] I2C: OMAP: Fix the interrupt clearing in OMAP4 Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 06/18] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 07/18] I2C: OMAP: Optimise the remove code Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 08/18] I2C: OMAP: Fix the error handling Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 09/18] I2C: OMAP: Correct I2C revision for OMAP3 Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 10/18] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 11/18] I2C: OMAP: use devm_* functions Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 12/18] I2C: OMAP: Fix the crash in i2c remove Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 13/18] I2C: OMAP: Handle error check for pm runtime Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 14/18] I2C: OMAP: Use SET_RUNTIME_PM_OPS Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 15/18] I2C: OMAP: make the read ready processing a separate function Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153 Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 17/18] I2C: OMAP: Do not set the XUDF if the underflow is not reached Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 18/18] I2C: OMAP: Rename the 1p153 to the erratum id i462 Shubhrajyoti D

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120416181355.GK6487@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).