* [GIT PULL]: omap-serial updates for 3.4-rc [not found] <1334052148-10385-1-git-send-email-govindraj.raja@ti.com> @ 2012-04-10 10:06 ` Raja, Govindraj 2012-04-16 7:22 ` Raja, Govindraj 0 siblings, 1 reply; 5+ messages in thread From: Raja, Govindraj @ 2012-04-10 10:06 UTC (permalink / raw) To: linux-arm-kernel CC'ing Linux-ARM On Tue, Apr 10, 2012 at 3:32 PM, Govindraj.R <govindraj.raja@ti.com> wrote: > Hi Tony, > > Please Pull the following omap uart changes. > Changes basically involves getting rid of cpu checks > for populating erratas and features and move the same > from serial.c to omap-serial.c, MVR reg is used to find > uart versions and errata flags are populated accordingly. > > -- > Thanks, > Govindraj.R > > The following changes since commit 0034102808e0dbbf3a2394b82b1bb40b5778de9e: > > ?Linux 3.4-rc2 (2012-04-07 18:30:41 -0700) > > are available in the git repository at: > > ?git://gitorious.org/linux-3-x/omap-serial.git for_3.4/uart_fixes > > for you to fetch changes up to 6c34f211069409ea6d08b900eeaf86ef8efd0dca: > > ?OMAP2+: UART: replace omap34xx/omap4xx cpu checks with not omap24xx (2012-04-10 15:14:58 +0530) > > ---------------------------------------------------------------- > Govindraj.R (3): > ? ? ?OMAP2+: UART: Remove cpu checks for populating errata flags > ? ? ?OMAP2+: UART: enable tx wakeup bit for wer reg > ? ? ?OMAP2+: UART: replace omap34xx/omap4xx cpu checks with not omap24xx > > ?arch/arm/mach-omap2/serial.c ? ? ? ? ? ? ? ? ?| ? 13 +--- > ?arch/arm/plat-omap/include/plat/omap-serial.h | ? ?9 +++- > ?drivers/tty/serial/omap-serial.c ? ? ? ? ? ? ?| ? 83 ++++++++++++++++++++++++- > ?3 files changed, 91 insertions(+), 14 deletions(-) > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at ?http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 5+ messages in thread
* [GIT PULL]: omap-serial updates for 3.4-rc 2012-04-10 10:06 ` [GIT PULL]: omap-serial updates for 3.4-rc Raja, Govindraj @ 2012-04-16 7:22 ` Raja, Govindraj 2012-04-16 10:40 ` Raja, Govindraj 0 siblings, 1 reply; 5+ messages in thread From: Raja, Govindraj @ 2012-04-16 7:22 UTC (permalink / raw) To: linux-arm-kernel Hi Tony, On Tue, Apr 10, 2012 at 3:36 PM, Raja, Govindraj <govindraj.raja@ti.com> wrote: > CC'ing Linux-ARM > > > On Tue, Apr 10, 2012 at 3:32 PM, Govindraj.R <govindraj.raja@ti.com> wrote: >> Hi Tony, >> >> Please Pull the following omap uart changes. >> Changes basically involves getting rid of cpu checks >> for populating erratas and features and move the same >> from serial.c to omap-serial.c, MVR reg is used to find >> uart versions and errata flags are populated accordingly. here [1] is the updated pull request I have incorporated even the serial mux fixes done along with previous changes. -- Thanks, Govindraj.R [1]: The following changes since commit e816b57a337ea3b755de72bec38c10c864f23015: Linux 3.4-rc3 (2012-04-15 18:28:29 -0700) are available in the git repository at: git://gitorious.org/linux-3-x/omap-serial.git for_3.4/uart_fixes for you to fetch changes up to 32b41c3c98aa652470ca42d1f0be4b558602babb: OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup (2012-04-16 12:25:14 +0530) ---------------------------------------------------------------- Govindraj.R (5): OMAP2+: UART: Remove cpu checks for populating errata flags OMAP2+: UART: enable tx wakeup bit for wer reg OMAP2+: UART: replace omap34xx/omap4xx cpu checks with not omap24xx OMAP2+: UART: Fix incorrect population of default uart pads OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup arch/arm/mach-omap2/mux.c | 3 +- arch/arm/mach-omap2/mux.h | 10 ++ arch/arm/mach-omap2/serial.c | 190 +++++++++---------------- arch/arm/plat-omap/include/plat/omap-serial.h | 9 +- drivers/tty/serial/omap-serial.c | 83 +++++++++++- 5 files changed, 165 insertions(+), 130 deletions(-) ^ permalink raw reply [flat|nested] 5+ messages in thread
* [GIT PULL]: omap-serial updates for 3.4-rc 2012-04-16 7:22 ` Raja, Govindraj @ 2012-04-16 10:40 ` Raja, Govindraj 2012-04-17 17:35 ` Tony Lindgren 0 siblings, 1 reply; 5+ messages in thread From: Raja, Govindraj @ 2012-04-16 10:40 UTC (permalink / raw) To: linux-arm-kernel On Mon, Apr 16, 2012 at 12:52 PM, Raja, Govindraj <govindraj.raja@ti.com> wrote: > Hi Tony, > > On Tue, Apr 10, 2012 at 3:36 PM, Raja, Govindraj <govindraj.raja@ti.com> wrote: >> CC'ing Linux-ARM >> >> >> On Tue, Apr 10, 2012 at 3:32 PM, Govindraj.R <govindraj.raja@ti.com> wrote: >>> Hi Tony, >>> >>> Please Pull the following omap uart changes. >>> Changes basically involves getting rid of cpu checks >>> for populating erratas and features and move the same >>> from serial.c to omap-serial.c, MVR reg is used to find >>> uart versions and errata flags are populated accordingly. > > here [1] is the updated pull request I have incorporated even the > serial mux fixes done along with previous changes. > Updated request [1] After adding Santosh's serial fix to use smartidle wakeup if available from hwmod. -- Thanks, Govindraj.R [1]: The following changes since commit e816b57a337ea3b755de72bec38c10c864f23015: Linux 3.4-rc3 (2012-04-15 18:28:29 -0700) are available in the git repository at: git://gitorious.org/linux-3-x/omap-serial.git for_3.4/uart_fixes for you to fetch changes up to 381772fefe13e73fc3d01c462d401785767c3775: ARM: OMAP: serial: Fix the ocp smart idlemode handling bug (2012-04-16 15:46:26 +0530) ---------------------------------------------------------------- Govindraj.R (5): OMAP2+: UART: Remove cpu checks for populating errata flags OMAP2+: UART: enable tx wakeup bit for wer reg OMAP2+: UART: replace omap34xx/omap4xx cpu checks with not omap24xx OMAP2+: UART: Fix incorrect population of default uart pads OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup Santosh Shilimkar (1): ARM: OMAP: serial: Fix the ocp smart idlemode handling bug arch/arm/mach-omap2/mux.c | 3 +- arch/arm/mach-omap2/mux.h | 10 ++ arch/arm/mach-omap2/serial.c | 198 +++++++++---------------- arch/arm/plat-omap/include/plat/omap-serial.h | 9 +- drivers/tty/serial/omap-serial.c | 83 ++++++++++- 5 files changed, 172 insertions(+), 131 deletions(-) ^ permalink raw reply [flat|nested] 5+ messages in thread
* [GIT PULL]: omap-serial updates for 3.4-rc 2012-04-16 10:40 ` Raja, Govindraj @ 2012-04-17 17:35 ` Tony Lindgren [not found] ` <CAMQu2gx6FOC2RhSYMqUEb1qqF2c+QidzRR-ZJTH_PWDL-qymUQ@mail.gmail.com> 0 siblings, 1 reply; 5+ messages in thread From: Tony Lindgren @ 2012-04-17 17:35 UTC (permalink / raw) To: linux-arm-kernel Hi, * Raja, Govindraj <govindraj.raja@ti.com> [120416 03:44]: > > The following changes since commit e816b57a337ea3b755de72bec38c10c864f23015: > > Linux 3.4-rc3 (2012-04-15 18:28:29 -0700) > > are available in the git repository at: > > git://gitorious.org/linux-3-x/omap-serial.git for_3.4/uart_fixes > > for you to fetch changes up to 381772fefe13e73fc3d01c462d401785767c3775: > > ARM: OMAP: serial: Fix the ocp smart idlemode handling bug > (2012-04-16 15:46:26 +0530) > > ---------------------------------------------------------------- > Govindraj.R (5): > OMAP2+: UART: Remove cpu checks for populating errata flags Not a fix. > OMAP2+: UART: enable tx wakeup bit for wer reg Not a fix, and should get reviewed and merged via linux-serial mailing list. > OMAP2+: UART: replace omap34xx/omap4xx cpu checks with not omap24xx Not a fix. > OMAP2+: UART: Fix incorrect population of default uart pads I'll apply this directly with updated comments into fixes. > OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup Not ready and too intrusive for -rc cycle. > Santosh Shilimkar (1): > ARM: OMAP: serial: Fix the ocp smart idlemode handling bug It seems this can wait as the wake-up events are anyways broken right now when we remove the muxing. So not pulling. Tony ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <CAMQu2gx6FOC2RhSYMqUEb1qqF2c+QidzRR-ZJTH_PWDL-qymUQ@mail.gmail.com>]
* [GIT PULL]: omap-serial updates for 3.4-rc [not found] ` <CAMQu2gx6FOC2RhSYMqUEb1qqF2c+QidzRR-ZJTH_PWDL-qymUQ@mail.gmail.com> @ 2012-04-17 19:22 ` Tony Lindgren 0 siblings, 0 replies; 5+ messages in thread From: Tony Lindgren @ 2012-04-17 19:22 UTC (permalink / raw) To: linux-arm-kernel * Shilimkar, Santosh <santosh.shilimkar@ti.com> [120417 11:27]: > On Apr 17, 2012 11:05 PM, "Tony Lindgren" <tony@atomide.com> wrote: > > > > > Santosh Shilimkar (1): > > > ARM: OMAP: serial: Fix the ocp smart idlemode handling bug > > > > It seems this can wait as the wake-up events are anyways broken right > > now when we remove the muxing. > > > This patch has no dependency on other patches in > this series. It is an indepedent fix for uart module wakeup which solves > the console slugishness. It should be taken and should even go to stable. > But I let you decide on it. OK, will apply to fixes then with Cc stable. Tony ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-04-17 19:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1334052148-10385-1-git-send-email-govindraj.raja@ti.com>
2012-04-10 10:06 ` [GIT PULL]: omap-serial updates for 3.4-rc Raja, Govindraj
2012-04-16 7:22 ` Raja, Govindraj
2012-04-16 10:40 ` Raja, Govindraj
2012-04-17 17:35 ` Tony Lindgren
[not found] ` <CAMQu2gx6FOC2RhSYMqUEb1qqF2c+QidzRR-ZJTH_PWDL-qymUQ@mail.gmail.com>
2012-04-17 19:22 ` Tony Lindgren
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).