From: r.schwebel@pengutronix.de (Robert Schwebel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] mfd: Add Freescale's PMIC MC34708 support
Date: Fri, 20 Apr 2012 09:40:15 +0200 [thread overview]
Message-ID: <20120420074015.GD31760@pengutronix.de> (raw)
In-Reply-To: <1334853521-23792-1-git-send-email-paul.liu@linaro.org>
On Fri, Apr 20, 2012 at 12:38:40AM +0800, Ying-Chun Liu (PaulLiu) wrote:
> diff --git a/Documentation/devicetree/bindings/mfd/mc34708.txt b/Documentation/devicetree/bindings/mfd/mc34708.txt
> new file mode 100644
> index 0000000..2bb5c9e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/mc34708.txt
> @@ -0,0 +1,61 @@
> +* Freescale MC34708 Power Management Integrated Circuit (PMIC)
> +
> +Required properties:
> +- compatible : Must be "fsl,mc34708"
> +
> +Optional properties:
> +- fsl,mc34708-uses-adc : Indicate the ADC is being used
> +- fsl,mc34708-uses-rtc : Indicate the RTC is being used
> +- fsl,mc34708-uses-ts : Indicate the touchscreen controller is being used
> +
> +Sub-nodes:
> +- regulators : Contain the regulator nodes. The MC34708 regulators are
> + bound using their names as listed below for enabling.
> +
> + mc34708__sw1a : regulator SW1A
> + mc34708__sw1b : regulator SW1B
> + mc34708__sw2 : regulator SW2
> + mc34708__sw3 : regulator SW3
> + mc34708__sw4A : regulator SW4A
> + mc34708__sw4b : regulator SW4B
> + mc34708__swbst : regulator SWBST
> + mc34708__vpll : regulator VPLL
> + mc34708__vrefddr : regulator VREFDDR
> + mc34708__vusb : regulator VUSB
> + mc34708__vusb2 : regulator VUSB2
> + mc34708__vdac : regulator VDAC
> + mc34708__vgen1 : regulator VGEN1
> + mc34708__vgen2 : regulator VGEN2
> +
> + The bindings details of individual regulator device can be found in:
> + Documentation/devicetree/bindings/regulator/regulator.txt
> +
> +Examples:
> +
> +i2c at 63fc8000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
> + reg = <0x63fc8000 0x4000>;
> + interrupts = <62>;
> + status = "okay";
> +
> + pmic: mc34708 at 8 {
> + compatible = "fsl,mc34708";
> + reg = <0x08>;
> +
> + regulators {
> + mc34708__sw1a {
> + regulator-min-microvolt = <650000>;
> + regulator-max-microvolt = <1437500>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + mc34708__vusb {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
The oftree parts should be discussed on devicetree-discuss.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2012-04-20 7:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-19 16:38 [PATCH 1/2] mfd: Add Freescale's PMIC MC34708 support Ying-Chun Liu (PaulLiu)
2012-04-19 16:38 ` [PATCH 2/2] regulator: Add Freescale's MC34708 regulators Ying-Chun Liu (PaulLiu)
2012-04-20 11:42 ` Mark Brown
2012-04-20 6:35 ` [PATCH 1/2] mfd: Add Freescale's PMIC MC34708 support Lothar Waßmann
2012-04-20 7:40 ` Robert Schwebel [this message]
2012-04-20 9:20 ` Mark Brown
2012-04-22 23:32 ` Marc Reilly
2012-07-04 7:37 ` Uwe Kleine-König
2012-07-04 13:44 ` Shawn Guo
2012-07-05 5:48 ` Ying-Chun Liu (PaulLiu)
2012-07-05 6:46 ` Ying-Chun Liu (PaulLiu)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120420074015.GD31760@pengutronix.de \
--to=r.schwebel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).