From mboxrd@z Thu Jan  1 00:00:00 1970
From: plagnioj@jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
Date: Sat, 21 Apr 2012 05:42:04 +0200
Subject: [PATCH v4] iio: Add device tree support to LPC32xx ADC
In-Reply-To: <1334951307-1269-1-git-send-email-stigge@antcom.de>
References: <1334951307-1269-1-git-send-email-stigge@antcom.de>
Message-ID: <20120421034204.GA9142@game.jcrosoft.org>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 21:48 Fri 20 Apr     , Roland Stigge wrote:
> This patch adds device tree support to the LPC32xx's ADC.
> 
> Signed-off-by: Roland Stigge <stigge@antcom.de>
> 
> ---
> 
> Applies to v3.4-rc3
> 
> Changes since v3:
> * Changed "compatible" strings to non-wildcard versions
> 
> Thanks to Arnd Bergmann and Lars-Peter Clausen for reviewing!
> 
>  Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt |   17 ++++++++++
>  drivers/staging/iio/adc/lpc32xx_adc.c                             |   13 +++++++
>  2 files changed, 30 insertions(+)
> 
> --- /dev/null
> +++ linux-2.6/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
> @@ -0,0 +1,17 @@
> +* NXP LPC32xx SoC ADC controller
> +
> +Required properties:
> +- compatible: must be "nxp,lpc3220-adc", "nxp,lpc3230-adc", "nxp,lpc3240-adc"
> +  or "nxp,lpc3250-adc"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: The ADC interrupt
> +
> +Example:
> +
> +	adc at 40048000 {
> +		compatible = "nxp,lpc3250-adc";
> +		reg = <0x40048000 0x1000>;
> +		interrupt-parent = <&mic>;
> +		interrupts = <39 0>;
> +	};
> --- linux-2.6.orig/drivers/staging/iio/adc/lpc32xx_adc.c
> +++ linux-2.6/drivers/staging/iio/adc/lpc32xx_adc.c
> @@ -30,6 +30,7 @@
>  #include <linux/clk.h>
>  #include <linux/err.h>
>  #include <linux/completion.h>
> +#include <linux/of.h>
>  
>  #include "../iio.h"
>  #include "../sysfs.h"
> @@ -221,12 +222,24 @@ static int __devexit lpc32xx_adc_remove(
>  	return 0;
>  }
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id lpc32xx_adc_match[] = {
> +	{ .compatible = "nxp,lpc3220-adc" },
> +	{ .compatible = "nxp,lpc3230-adc" },
> +	{ .compatible = "nxp,lpc3240-adc" },
> +	{ .compatible = "nxp,lpc3250-adc" },
do you really need to list them all?


if they are all cmpatible just list the first one

Best Regards,
J.