[PATCH 8/8] ARM: omap_hsmmc: remove platform data dma_mask and initialization

[linux@arm.linux.org.uk (Russell King - ARM Linux)]

On Mon, Apr 23, 2012 at 07:30:48AM -0700, Tony Lindgren wrote:
> * Russell King - ARM Linux <linux@arm.linux.org.uk> [120423 07:17]:
> > On Fri, Apr 20, 2012 at 09:50:00AM -0700, Tony Lindgren wrote:
> > > Then something like this is still needed on top of your original mmc driver
> > > patch for omap2420:
> > > 
> > > --- a/drivers/mmc/host/omap.c
> > > +++ b/drivers/mmc/host/omap.c
> > > @@ -1617,11 +1617,14 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
> > >  	host->dma_tx_burst = -1;
> > >  	host->dma_rx_burst = -1;
> > >  
> > > -	sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
> > > +	if (cpu_is_omap24xx())
> > > +		sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX :  OMAP24XX_DMA_MMC2_TX;
> > > +	else
> > > +		sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
> > >  	host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
> > >  #if 0
> > >  	if (!host->dma_tx) {
> > > -		def_err(host->dev, "unable to obtain TX DMA engine channel %u\n",
> > > +		dev_err(host->dev, "unable to obtain TX DMA engine channel %u\n",
> > >  			sig);
> > >  		goto err_dma;
> > >  	}
> > > @@ -1632,7 +1635,10 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
> > >  #endif
> > >  #endif
> > >  #ifdef USE_DMA_ENGINE
> > > -	sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
> > > +	if (cpu_is_omap24xx())
> > > +		sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX :  OMAP24XX_DMA_MMC2_RX;
> > > +	else
> > > +		sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
> > >  	host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
> > >  #if 0
> > >  	if (!host->dma_rx) {
> > 
> > Is there any chance this DMA signal information could be moved into
> > platform resources, like omap_hsmmc has done?  I could then get rid
> > of the plat/dma.h dependence from this driver.
> 
> Sure, I'll take a look at that later on today.

Let me re-post the series first so you can produce patches against the
latest version of the series.  It's 11 patches, which contains the SPI
conversion.