From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/5] clk: prevent spurious parent rate propagation
Date: Mon, 7 May 2012 09:58:36 +0200 [thread overview]
Message-ID: <20120507075836.GE4141@pengutronix.de> (raw)
In-Reply-To: <1336367310-5140-3-git-send-email-mturquette@linaro.org>
On Sun, May 06, 2012 at 10:08:27PM -0700, Mike Turquette wrote:
> Patch 'clk: always pass parent_rate into .round_rate' made a subtle
> change to the semantics of .round_rate. It is now expected for the
> parent's rate to always be passed in, simplifying the implemenation of
> various .round_rate callback definitions.
>
> However the patch also introduced a bug in clk_calc_new_rates whereby a
> clock without the CLK_SET_RATE_PARENT flag set could still propagate a
> rate change up to a parent clock if the the .round_rate callback
> modified the &best_parent_rate value in any way.
>
> This patch fixes the issue at the framework level (in
> clk_calc_new_rates) by specifically handling the case where the
> CLK_SET_RATE_PARENT flag is not set.
>
> Signed-off-by: Mike Turquette <mturquette@linaro.org>
> Reported-by: Sascha Hauer<s.hauer@pengutronix.de>
I think a warning might be useful when a clk driver tries to change the
parent rate even if it is not allowed to. This can be added in a later
patch, so
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha
> ---
> drivers/clk/clk.c | 7 ++++++-
> 1 files changed, 6 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 8149764..7ceca0e 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -774,12 +774,18 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
> if (IS_ERR_OR_NULL(clk))
> return NULL;
>
> + /* save parent rate, if it exists */
> + if (clk->parent)
> + best_parent_rate = clk->parent->rate;
> +
> /* never propagate up to the parent */
> if (!(clk->flags & CLK_SET_RATE_PARENT)) {
> if (!clk->ops->round_rate) {
> clk->new_rate = clk->rate;
> return NULL;
> }
> + new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
> + goto out;
> }
>
> /* need clk->parent from here on out */
> @@ -795,7 +801,6 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
> goto out;
> }
>
> - best_parent_rate = clk->parent->rate;
> new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
>
> if (best_parent_rate != clk->parent->rate) {
> --
> 1.7.5.4
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2012-05-07 7:58 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 5:08 [PATCH 0/5] more clk-next fixes Mike Turquette
2012-05-07 5:08 ` [PATCH 1/5] MAINTAINERS: add entry for common clk framework Mike Turquette
2012-05-07 5:08 ` [PATCH 2/5] clk: prevent spurious parent rate propagation Mike Turquette
2012-05-07 7:58 ` Sascha Hauer [this message]
2012-05-07 17:34 ` Turquette, Mike
2012-05-07 5:08 ` [PATCH 3/5] clk: remove COMMON_CLK_DISABLE_UNUSED Mike Turquette
2012-05-07 19:31 ` Saravana Kannan
2012-05-07 5:08 ` [PATCH 4/5] clk: mux: assign init data Mike Turquette
2012-05-07 5:08 ` [PATCH 5/5] clk: add a fixed factor clock Mike Turquette
2012-05-07 19:54 ` Saravana Kannan
2012-05-07 20:14 ` Turquette, Mike
2012-05-07 20:26 ` Saravana Kannan
2012-05-08 7:20 ` [PATCH 0/5] more clk-next fixes Andrew Lunn
2012-05-08 16:12 ` Shawn Guo
2012-05-08 17:33 ` Turquette, Mike
2012-05-08 21:35 ` Turquette, Mike
2012-05-11 14:39 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120507075836.GE4141@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).