From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/06] mach-shmobile: Emma Mobile EV2 GPIO support V2
Date: Sat, 12 May 2012 04:42:31 +0900 [thread overview]
Message-ID: <20120511194231.6567.67186.sendpatchset@w520> (raw)
In-Reply-To: <20120511194151.6567.53888.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Tie in the Emma Mobile GPIO driver "em-gio" to
support the GPIOs on Emma Mobile EV2.
A static IRQ range is used to allow boards to
hook up their platform devices to the GPIOs.
DT support is still on the TODO for the GPIO driver,
so only platform device support is included here.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Changes since V1:
- none, this is the first public release
arch/arm/mach-shmobile/Kconfig | 1
arch/arm/mach-shmobile/include/mach/emev2.h | 3
arch/arm/mach-shmobile/setup-emev2.c | 203 +++++++++++++++++++++++++++
3 files changed, 207 insertions(+)
--- 0008/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2012-05-12 03:41:45.000000000 +0900
@@ -45,6 +45,7 @@ config ARCH_EMEV2
bool "Emma Mobile EV2"
select CPU_V7
select ARM_GIC
+ select ARCH_WANT_OPTIONAL_GPIOLIB
comment "SH-Mobile Board Type"
--- 0009/arch/arm/mach-shmobile/include/mach/emev2.h
+++ work/arch/arm/mach-shmobile/include/mach/emev2.h 2012-05-12 03:44:29.000000000 +0900
@@ -13,4 +13,7 @@ extern void emev2_secondary_init(unsigne
extern int emev2_boot_secondary(unsigned int cpu);
extern void emev2_smp_prepare_cpus(void);
+#define EMEV2_GPIO_BASE 200
+#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
+
#endif /* __ASM_EMEV2_H__ */
--- 0009/arch/arm/mach-shmobile/setup-emev2.c
+++ work/arch/arm/mach-shmobile/setup-emev2.c 2012-05-12 03:45:30.000000000 +0900
@@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-em.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/io.h>
@@ -156,6 +157,203 @@ static struct platform_device sti_device
.num_resources = ARRAY_SIZE(sti_resources),
};
+
+/* GIO */
+static struct gpio_em_config gio0_config = {
+ .gpio_base = 0,
+ .irq_base = EMEV2_GPIO_IRQ(0),
+ .number_of_pins = 32,
+};
+
+static struct resource gio0_resources[] = {
+ [0] = {
+ .name = "GIO_000",
+ .start = 0xe0050000,
+ .end = 0xe005002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "GIO_000",
+ .start = 0xe0050040,
+ .end = 0xe005005f,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 99,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 100,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gio0_device = {
+ .name = "em_gio",
+ .id = 0,
+ .resource = gio0_resources,
+ .num_resources = ARRAY_SIZE(gio0_resources),
+ .dev = {
+ .platform_data = &gio0_config,
+ },
+};
+
+static struct gpio_em_config gio1_config = {
+ .gpio_base = 32,
+ .irq_base = EMEV2_GPIO_IRQ(32),
+ .number_of_pins = 32,
+};
+
+static struct resource gio1_resources[] = {
+ [0] = {
+ .name = "GIO_032",
+ .start = 0xe0050080,
+ .end = 0xe00500ab,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "GIO_032",
+ .start = 0xe00500c0,
+ .end = 0xe00500df,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 102,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gio1_device = {
+ .name = "em_gio",
+ .id = 1,
+ .resource = gio1_resources,
+ .num_resources = ARRAY_SIZE(gio1_resources),
+ .dev = {
+ .platform_data = &gio1_config,
+ },
+};
+
+static struct gpio_em_config gio2_config = {
+ .gpio_base = 64,
+ .irq_base = EMEV2_GPIO_IRQ(64),
+ .number_of_pins = 32,
+};
+
+static struct resource gio2_resources[] = {
+ [0] = {
+ .name = "GIO_064",
+ .start = 0xe0050100,
+ .end = 0xe005012b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "GIO_064",
+ .start = 0xe0050140,
+ .end = 0xe005015f,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 103,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gio2_device = {
+ .name = "em_gio",
+ .id = 2,
+ .resource = gio2_resources,
+ .num_resources = ARRAY_SIZE(gio2_resources),
+ .dev = {
+ .platform_data = &gio2_config,
+ },
+};
+
+static struct gpio_em_config gio3_config = {
+ .gpio_base = 96,
+ .irq_base = EMEV2_GPIO_IRQ(96),
+ .number_of_pins = 32,
+};
+
+static struct resource gio3_resources[] = {
+ [0] = {
+ .name = "GIO_096",
+ .start = 0xe0050100,
+ .end = 0xe005012b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "GIO_096",
+ .start = 0xe0050140,
+ .end = 0xe005015f,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 105,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 106,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gio3_device = {
+ .name = "em_gio",
+ .id = 3,
+ .resource = gio3_resources,
+ .num_resources = ARRAY_SIZE(gio3_resources),
+ .dev = {
+ .platform_data = &gio3_config,
+ },
+};
+
+static struct gpio_em_config gio4_config = {
+ .gpio_base = 128,
+ .irq_base = EMEV2_GPIO_IRQ(128),
+ .number_of_pins = 31,
+};
+
+static struct resource gio4_resources[] = {
+ [0] = {
+ .name = "GIO_128",
+ .start = 0xe0050200,
+ .end = 0xe005022b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "GIO_128",
+ .start = 0xe0050240,
+ .end = 0xe005025f,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 107,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 108,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gio4_device = {
+ .name = "em_gio",
+ .id = 4,
+ .resource = gio4_resources,
+ .num_resources = ARRAY_SIZE(gio4_resources),
+ .dev = {
+ .platform_data = &gio4_config,
+ },
+};
+
static struct platform_device *emev2_early_devices[] __initdata = {
&uart0_device,
&uart1_device,
@@ -165,6 +363,11 @@ static struct platform_device *emev2_ear
static struct platform_device *emev2_late_devices[] __initdata = {
&sti_device,
+ &gio0_device,
+ &gio1_device,
+ &gio2_device,
+ &gio3_device,
+ &gio4_device,
};
void __init emev2_add_standard_devices(void)
next prev parent reply other threads:[~2012-05-11 19:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-11 19:41 [PATCH 00/06] mach-shmobile: Emma Mobile EV2 support V2 Magnus Damm
2012-05-11 19:42 ` [PATCH 01/06] mach-shmobile: Emma Mobile EV2 SoC base " Magnus Damm
2012-05-11 19:42 ` [PATCH 02/06] mach-shmobile: KZM9D board " Magnus Damm
2012-05-11 19:42 ` [PATCH 03/06] mach-shmobile: Emma Mobile EV2 SMP " Magnus Damm
2012-05-11 19:42 ` Magnus Damm [this message]
2012-05-11 19:42 ` [PATCH 05/06] mach-shmobile: KZM9D board Ethernet " Magnus Damm
2012-05-11 19:42 ` [PATCH 06/06] mach-shmobile: Emma Mobile EV2 DT " Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120511194231.6567.67186.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).