From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC] pl08x: don't use dma_slave_config direction argument
Date: Wed, 16 May 2012 13:52:53 +0100 [thread overview]
Message-ID: <20120516125253.GD9571@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <4FB39C62.3030305@antcom.de>
On Wed, May 16, 2012 at 02:24:02PM +0200, Roland Stigge wrote:
> After applying series 1-6 (as well as with 1-7), my just posted LPC32xx
> NAND drivers have problems mounting the MTD (basically, NAND page reads,
> DMA dev to mem from NAND controller internal buffers).
>
> * SLC driver says:
>
> lpc32xx-nand 20020000.flash: FIFO not empty!
> lpc32xx-nand 20020000.flash: FIFO held data too long
> lpc32xx-nand 20020000.flash: DMA FIFO failure
>
> * MLC driver just gets bad data resulting in detected bad blocks.
>
> Without the patches, they work as tested.
>
> Any hints, before I find the time to sort out all the details with
> amba-pl08x?
Nothing jumps out; it would be useful if you could bisect the small
series - I did the conversion in small steps so it should be easy to
track down. And it shouldn't take too long to rebuild between each
iteration. Whatever it is, it's probably going to be a stupid mistake
somewhere.
next prev parent reply other threads:[~2012-05-16 12:52 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-16 11:04 [RFC] pl08x: don't use dma_slave_config direction argument Russell King - ARM Linux
2012-05-16 11:05 ` [PATCH 1/6] DMA: PL08x: move private data structures into amba-pl08x.c Russell King
2012-05-21 18:50 ` Linus Walleij
2012-05-16 11:05 ` [PATCH 2/6] DMA: PL08x: get src/dst addr direct from dma_slave_config struct Russell King
2012-05-16 11:05 ` [PATCH 3/6] DMA: PL08x: get rid of device_fc in struct pl08x_dma_chan Russell King
2012-05-16 11:06 ` [PATCH 4/6] DMA: PL08x: move the bus and increment selection to dma prepare function Russell King
2012-05-16 11:06 ` [PATCH 5/6] DMA: PL08x: extract function to to generate cctl values Russell King
2012-05-16 11:06 ` [PATCH 6/6] DMA: PL08x: ignore 'direction' argument in dma_slave_config Russell King
2012-05-16 11:17 ` [RFC] pl08x: don't use dma_slave_config direction argument Russell King - ARM Linux
2012-05-16 11:59 ` Linus Walleij
2012-05-16 12:10 ` Russell King - ARM Linux
2012-05-17 10:42 ` Russell King - ARM Linux
2012-05-18 15:47 ` Olof Johansson
2012-05-21 7:06 ` Linus Walleij
2012-05-21 7:03 ` Linus Walleij
2012-05-16 12:24 ` Roland Stigge
2012-05-16 12:52 ` Russell King - ARM Linux [this message]
2012-05-16 13:04 ` Roland Stigge
2012-05-16 13:06 ` Roland Stigge
2012-05-16 13:17 ` Russell King - ARM Linux
2012-05-16 13:36 ` Roland Stigge
2012-05-17 9:17 ` Russell King - ARM Linux
2012-05-17 14:30 ` Russell King - ARM Linux
2012-05-21 7:12 ` Linus Walleij
2012-05-17 17:03 ` Russell King - ARM Linux
2012-05-21 7:31 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120516125253.GD9571@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).