[PATCH 6/8] CI13xxx: Add i.MX233/i.MX28 binding code

[marex@denx.de (Marek Vasut)]

Dear Felipe Balbi,

> On Tue, May 15, 2012 at 10:23:37AM +0200, Marek Vasut wrote:
> > This codes connects the CI13xxx driver with the core found inside of
> > the Freescale i.MX244/i.MX28 CPU.
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Alan Stern <stern@rowland.harvard.edu>
> > Cc: Detlev Zundel <dzu@denx.de>
> > CC: Dong Aisheng <b29396@freescale.com>
> > CC: Fabio Estevam <fabio.estevam@freescale.com>
> > Cc: Felipe Balbi <balbi@ti.com>
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
> > Cc: linux-i2c at vger.kernel.org
> > CC: Sascha Hauer <s.hauer@pengutronix.de>
> > CC: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Stefano Babic <sbabic@denx.de>
> > CC: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> > Cc: Wolfgang Denk <wd@denx.de>
> > Cc: Wolfram Sang <w.sang@pengutronix.de>
> > ---
> > 
> >  drivers/usb/chipidea/Makefile      |    4 +
> >  drivers/usb/chipidea/ci13xxx_mxs.c |  201
> >  ++++++++++++++++++++++++++++++++++++ 2 files changed, 205 insertions(+)
> >  create mode 100644 drivers/usb/chipidea/ci13xxx_mxs.c
> > 
> > diff --git a/drivers/usb/chipidea/Makefile
> > b/drivers/usb/chipidea/Makefile index cc34937..266d57d 100644
> > --- a/drivers/usb/chipidea/Makefile
> > +++ b/drivers/usb/chipidea/Makefile
> > @@ -12,3 +12,7 @@ endif
> > 
> >  ifneq ($(CONFIG_ARCH_MSM),)
> >  
> >  	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_msm.o
> >  
> >  endif
> > 
> > +
> > +ifneq ($(CONFIG_ARCH_MXS),)
> > +	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_mxs.o
> > +endif
> 
> NAK... let it compile everywhere.

I just followed the pattern here, honestly I think this is quite OK so far. 
Further improvements can be made indeed.

> > diff --git a/drivers/usb/chipidea/ci13xxx_mxs.c
> > b/drivers/usb/chipidea/ci13xxx_mxs.c new file mode 100644
> > index 0000000..fcca90b
> > --- /dev/null
> > +++ b/drivers/usb/chipidea/ci13xxx_mxs.c
> > @@ -0,0 +1,201 @@
> > +/*
> > + * drivers/usb/chipidea/ci13xxx_mxs.c
> > + *
> > + * Freescale i.MX233/i.MX28 USB glue driver to CI13xxx core.
> > + *
> > + * Copyright (C) 2012 Marek Vasut <marex@denx.de>
> > + * on behalf of DENX Software Engineering GmbH
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/clk.h>
> > +#include <linux/dma-mapping.h>
> > +
> > +#include <linux/usb.h>
> > +#include <linux/usb/chipidea.h>
> > +#include <linux/usb/ch9.h>
> > +#include <linux/usb/otg.h>
> > +#include <linux/usb/gadget.h>
> > +#include <linux/usb/hcd.h>
> > +#include <linux/usb/ehci_def.h>
> > +
> > +#include <linux/usb/mxs-usb.h>
> > +
> > +#include "ci.h"
> > +
> > +static void ci13xxx_mxs_notify(struct ci13xxx *ci, unsigned event)
> > +{
> > +	uint32_t status;
> > +	struct usb_phy *phy;
> > +	struct mxs_ci13xxx_phy_notify notify;
> > +
> > +	phy = usb_get_transceiver();
> > +	if (!phy)
> > +		return;
> > +
> > +	if (event != CI13XXX_CONTROLLER_HOST_IRQ_EVENT)
> > +		return;
> > +
> > +	status = hw_read(ci, OP_USBSTS, ~0);
> > +
> > +	notify.discon = status & STS_PCD;
> > +
> > +	usb_phy_notify(phy, &notify);
> > +}
> > +
> > +static struct ci13xxx_udc_driver ci13xxx_mxs_udc_driver = {
> > +	.name			= "ci13xxx_mxs",
> > +	.flags			= /*CI13XXX_REGS_SHARED |*/
> > +				  CI13XXX_REQUIRE_TRANSCEIVER |
> > +				  CI13XXX_PULLUP_ON_VBUS |
> > +				  CI13XXX_DISABLE_STREAMING,
> > +	.capoffset		= 0x100,
> > +	.notify_event		= ci13xxx_mxs_notify,
> > +};
> > +
> > +struct ci13xxx_mxs_data {
> > +	struct clk		*clk;
> > +	struct platform_device	*pdev;
> > +};
> > +
> > +static int __devinit ci13xxx_mxs_probe(struct platform_device *pdev)
> > +{
> > +	struct ci13xxx_mxs_data *data;
> > +	int ret;
> > +	struct usb_phy *phy;
> > +
> > +	phy = usb_get_transceiver();
> > +	if (!phy)
> > +		return -EPROBE_DEFER;
> > +
> > +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> > +	if (!data) {
> > +		dev_err(&pdev->dev, "Failed to allocate CI13xxx-MXS data!\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	ret = usb_phy_init(phy);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to initialize PHY!\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	data->pdev = platform_device_alloc("ci_hdrc", -1);
> > +	if (!data->pdev) {
> > +		dev_err(&pdev->dev,
> > +			"Failed to allocate ci_hdrc platform device!\n");
> > +		ret = -ENOMEM;
> > +		goto put_phy;
> > +	}
> > +
> > +	/* Add DMA mask */
> > +	data->pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
> > +					sizeof(*data->pdev->dev.dma_mask),
> > +					GFP_KERNEL);
> > +	if (!data->pdev->dev.dma_mask) {
> > +		ret = -ENOMEM;
> > +		goto put_platform;
> > +	}
> > +
> > +	*data->pdev->dev.dma_mask = DMA_BIT_MASK(32);
> > +	data->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> 
> why don't you just point to the parent's ?

Good idea, thanks :)