From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] ARM: OMAP AM33xx: PRM/CM support for 3.6
Date: Mon, 21 May 2012 12:41:53 -0600 [thread overview]
Message-ID: <20120521184053.22565.90037.stgit@dusk> (raw)
Hi
This series implements low-level PRM/CM support for the AM33xx series
of chips. This support is a prerequisite for the kernel to reset,
enable, and disable on-chip IP blocks.
This series applies against Tony's devel-soc branch at commit
8a7289f52543cc89de73e174946edaa21a2d049d ("ARM: OMAP2+: am33xx:
Make am33xx as a separate class") plus the "ARM: OMAP2+: am33xx:
Add AM335XEVM machine support" patch from Afzal. Currently they
are compile-tested only.
These patches are also available from git://git.pwsan.com/linux-2.6
in the branch 'am33xx_prcm_devel_3.6'.
- Paul
---
am33xx_prcm_devel_3.6
text data bss dec hex filename
6559798 722684 5587872 12870354 c462d2 vmlinux.omap2plus_defconfig.orig
6562162 729652 5587872 12879686 c48746 vmlinux.omap2plus_defconfig
Vaibhav Hiremath (6):
ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset
ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
ARM: OMAP AM33xx: PRM: add PRM support
ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details
ARM: OMAP AM33xx: powerdomains: add AM335x support
ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
arch/arm/mach-omap2/Makefile | 7
arch/arm/mach-omap2/clockdomain.h | 2
arch/arm/mach-omap2/clockdomain33xx.c | 74 +++
arch/arm/mach-omap2/clockdomains33xx_data.c | 196 +++++++
arch/arm/mach-omap2/cm-regbits-33xx.h | 687 +++++++++++++++++++++++++
arch/arm/mach-omap2/cm33xx.c | 313 +++++++++++
arch/arm/mach-omap2/cm33xx.h | 420 +++++++++++++++
arch/arm/mach-omap2/control.h | 39 +
arch/arm/mach-omap2/io.c | 5
arch/arm/mach-omap2/powerdomain.h | 23 +
arch/arm/mach-omap2/powerdomain33xx.c | 229 ++++++++
arch/arm/mach-omap2/powerdomains33xx_data.c | 185 +++++++
arch/arm/mach-omap2/prm-regbits-33xx.h | 357 +++++++++++++
arch/arm/mach-omap2/prm33xx.c | 134 +++++
arch/arm/mach-omap2/prm33xx.h | 129 +++++
arch/arm/mach-omap2/voltage.h | 1
arch/arm/mach-omap2/voltagedomains33xx_data.c | 43 ++
17 files changed, 2824 insertions(+), 20 deletions(-)
create mode 100644 arch/arm/mach-omap2/clockdomain33xx.c
create mode 100644 arch/arm/mach-omap2/clockdomains33xx_data.c
create mode 100644 arch/arm/mach-omap2/cm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/cm33xx.c
create mode 100644 arch/arm/mach-omap2/cm33xx.h
create mode 100644 arch/arm/mach-omap2/powerdomain33xx.c
create mode 100644 arch/arm/mach-omap2/powerdomains33xx_data.c
create mode 100644 arch/arm/mach-omap2/prm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/prm33xx.c
create mode 100644 arch/arm/mach-omap2/prm33xx.h
create mode 100644 arch/arm/mach-omap2/voltagedomains33xx_data.c
next reply other threads:[~2012-05-21 18:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-21 18:41 Paul Walmsley [this message]
2012-05-21 18:41 ` [PATCH 1/6] ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset Paul Walmsley
2012-05-21 18:41 ` [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data Paul Walmsley
2012-06-11 1:20 ` Paul Walmsley
2012-06-11 9:19 ` Vaibhav Hiremath
2012-06-11 16:10 ` Paul Walmsley
2012-06-11 17:16 ` Vaibhav Hiremath
2012-05-21 18:41 ` [PATCH 3/6] ARM: OMAP AM33xx: PRM: add PRM support Paul Walmsley
2012-05-21 18:42 ` [PATCH 4/6] ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details Paul Walmsley
2012-05-21 18:42 ` [PATCH 5/6] ARM: OMAP AM33xx: powerdomains: add AM335x support Paul Walmsley
2012-05-21 18:42 ` [PATCH 6/6] ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120521184053.22565.90037.stgit@dusk \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox