public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 11/11] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init
Date: Thu, 07 Jun 2012 00:13:15 -0600	[thread overview]
Message-ID: <20120607061314.25532.93570.stgit@dusk> (raw)
In-Reply-To: <20120607060901.25532.68354.stgit@dusk>

Resolve this kernel boot message:

omap_hwmod: mcpdm: cannot be enabled for reset (3)

It appears that the McPDM on OMAP4 can only receive its functional
clock from an off-chip source.  This source is not guaranteed to be
present on the board, and when present, it is controlled by I2C.  This
would introduce a board dependency to the early hwmod code which it
was not designed to handle.  Also, neither the driver for this
off-chip clock provider nor the I2C code is available early in boot
when the hwmod code is attempting to enable and reset IP blocks.  This
effectively makes it impossible to enable and reset this device during
hwmod init.

At its core, this patch is a workaround for an OMAP hardware problem.
It should be possible to configure the OMAP to provide any IP block's
functional clock from an on-chip source.  (This is true for almost
every IP block on the chip.  As far as I know, McPDM is the only
exception.)  If the kernel cannot reset and configure IP blocks, it
cannot guarantee a sane SoC state.  Relying on an optional off-chip
clock also creates a board dependency which is beyond the scope of the
early hwmod code.

This patch works around the issue by marking the McPDM hwmod record
with the HWMOD_UNKNOWN_MAIN_FCLK_STATE flag.  This prevents the hwmod
code from touching the device early during boot.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: P?ter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Beno?t Cousson <b-cousson@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 20e45a6..cc1310a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2090,6 +2090,18 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	.name		= "mcpdm",
 	.class		= &omap44xx_mcpdm_hwmod_class,
 	.clkdm_name	= "abe_clkdm",
+	/*
+	 * It's suspected that the McPDM requires an off-chip main
+	 * functional clock, controlled via I2C.  This IP block is
+	 * currently reset very early during boot, before I2C is
+	 * available, so it doesn't seem that we have any choice in
+	 * the kernel other than to avoid resetting it.  XXX This is
+	 * really a hardware issue workaround: every IP block should
+	 * be able to source its main functional clock from either
+	 * on-chip or off-chip sources.  McPDM seems to be the only
+	 * current exception.
+	 */
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",

  parent reply	other threads:[~2012-06-07  6:13 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-07  6:13 [PATCH 00/11] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc Paul Walmsley
2012-06-07  6:13 ` [PATCH 01/11] ARM: OMAP2+: hwmod: add setup_preprogram hook Paul Walmsley
2012-06-07  6:13 ` [PATCH 02/11] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup Paul Walmsley
2012-06-07  7:19   ` Tony Lindgren
2012-06-07  7:31     ` Paul Walmsley
2012-06-07  7:48       ` Tony Lindgren
2012-06-07 10:45         ` Paul Walmsley
2012-06-07 11:08           ` Tony Lindgren
2012-06-07  6:13 ` [PATCH 03/11] ARM: OMAP4: hwmod data: add SL2IF hardreset line Paul Walmsley
2012-06-07  6:13 ` [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb) Paul Walmsley
2012-06-07  7:31   ` Tony Lindgren
2012-06-07  7:33     ` Felipe Balbi
2012-06-07  8:00       ` Tony Lindgren
2012-06-07  7:40     ` Paul Walmsley
2012-06-07  7:51       ` Tony Lindgren
2012-06-07  7:55         ` Felipe Balbi
2012-06-07  8:02           ` Cousson, Benoit
2012-06-07  8:10             ` Tony Lindgren
2012-06-07  8:14             ` Felipe Balbi
2012-06-07 10:52             ` Paul Walmsley
2012-06-07 12:30               ` Cousson, Benoit
2012-06-08  1:11                 ` Paul Walmsley
2012-06-08 13:13                   ` Cousson, Benoit
2012-06-08 13:28                     ` Paul Walmsley
2012-06-08 19:32                       ` Hiremath, Vaibhav
2012-06-08 23:10                         ` AM335x CPSW reset (was "RE: [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)") Paul Walmsley
2012-06-09  8:39                           ` Hiremath, Vaibhav
2012-06-09 16:05                             ` Paul Walmsley
2012-06-11  6:15                       ` [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb) Tony Lindgren
2012-06-11  8:04                         ` Paul Walmsley
2012-06-11  9:24                           ` Cousson, Benoit
2012-06-11 16:20                             ` Paul Walmsley
2012-06-07 10:20         ` Paul Walmsley
2012-06-07 10:52           ` Tony Lindgren
2012-06-07 22:05             ` Paul Walmsley
2012-06-08  6:38               ` Tony Lindgren
2012-06-09  1:31                 ` Paul Walmsley
2012-06-11  6:21                   ` Tony Lindgren
2012-06-07  6:13 ` [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer Paul Walmsley
2012-06-07  6:59   ` Hiremath, Vaibhav
2012-06-07  7:08     ` Paul Walmsley
2012-06-07 18:09       ` Hiremath, Vaibhav
2012-06-07 20:03         ` Paul Walmsley
2012-06-08 19:10           ` Hiremath, Vaibhav
2012-06-11  9:12             ` Cousson, Benoit
2012-06-08 13:22   ` Tero Kristo
2012-06-08 23:18     ` Paul Walmsley
2012-06-07  6:13 ` [PATCH 06/11] ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby Paul Walmsley
2012-06-07  6:13 ` [PATCH 07/11] ARM: OMAP: PM: Lock clocks list while generating summary Paul Walmsley
2012-06-07  6:13 ` [PATCH 08/11] ARM: OMAP2+: CM: increase the module disable timeout Paul Walmsley
2012-06-07  6:13 ` [PATCH 10/11] ARM: OMAP2+: hwmod: add flag to prevent hwmod code from touching IP block during init Paul Walmsley
2012-06-07  6:13 ` [PATCH 09/11] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks Paul Walmsley
2012-06-07  6:39   ` Rajendra Nayak
2012-06-18 17:41     ` Paul Walmsley
2012-06-19  5:15       ` Rajendra Nayak
2012-06-07  6:13 ` Paul Walmsley [this message]
2012-06-08 13:30 ` [PATCH 00/11] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc Tero Kristo
2012-06-09  1:15   ` Paul Walmsley
2012-06-13 23:55   ` Paul Walmsley
2012-06-14  7:36     ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120607061314.25532.93570.stgit@dusk \
    --to=paul@pwsan.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox