From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 12/12] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init
Date: Sun, 10 Jun 2012 18:46:41 -0600 [thread overview]
Message-ID: <20120611004626.20034.42995.stgit@dusk> (raw)
In-Reply-To: <20120611004502.20034.8840.stgit@dusk>
Resolve this kernel boot message:
omap_hwmod: mcpdm: cannot be enabled for reset (3)
It appears that the McPDM on OMAP4 can only receive its functional
clock from an off-chip source. This source is not guaranteed to be
present on the board, and when present, it is controlled by I2C. This
would introduce a board dependency to the early hwmod code which it
was not designed to handle. Also, neither the driver for this
off-chip clock provider nor the I2C code is available early in boot
when the hwmod code is attempting to enable and reset IP blocks. This
effectively makes it impossible to enable and reset this device during
hwmod init.
At its core, this patch is a workaround for an OMAP hardware problem.
It should be possible to configure the OMAP to provide any IP block's
functional clock from an on-chip source. (This is true for almost
every IP block on the chip. As far as I know, McPDM is the only
exception.) If the kernel cannot reset and configure IP blocks, it
cannot guarantee a sane SoC state. Relying on an optional off-chip
clock also creates a board dependency which is beyond the scope of the
early hwmod code.
This patch works around the issue by marking the McPDM hwmod record
with the HWMOD_EXT_OPT_MAIN_CLK flag. This prevents the hwmod
code from touching the device early during boot.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: P?ter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Beno?t Cousson <b-cousson@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 3613054..86fc513 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2091,6 +2091,18 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
.name = "mcpdm",
.class = &omap44xx_mcpdm_hwmod_class,
.clkdm_name = "abe_clkdm",
+ /*
+ * It's suspected that the McPDM requires an off-chip main
+ * functional clock, controlled via I2C. This IP block is
+ * currently reset very early during boot, before I2C is
+ * available, so it doesn't seem that we have any choice in
+ * the kernel other than to avoid resetting it. XXX This is
+ * really a hardware issue workaround: every IP block should
+ * be able to source its main functional clock from either
+ * on-chip or off-chip sources. McPDM seems to be the only
+ * current exception.
+ */
+ .flags = HWMOD_EXT_OPT_MAIN_CLK,
.mpu_irqs = omap44xx_mcpdm_irqs,
.sdma_reqs = omap44xx_mcpdm_sdma_reqs,
.main_clk = "mcpdm_fck",
next prev parent reply other threads:[~2012-06-11 0:46 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-11 0:45 [PATCHv2 00/12] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc Paul Walmsley
2012-06-11 0:45 ` [PATCHv2 01/12] ARM: OMAP: PM: Lock clocks list while generating summary Paul Walmsley
2012-06-11 0:45 ` [PATCHv2 02/12] ARM: OMAP2+: hwmod code/data: fix 32K sync timer Paul Walmsley
2012-06-14 16:47 ` Cousson, Benoit
2012-06-14 18:04 ` Paul Walmsley
2012-06-14 20:13 ` Cousson, Benoit
2012-06-15 0:18 ` Paul Walmsley
2012-06-15 13:28 ` Cousson, Benoit
2012-07-04 12:48 ` Paul Walmsley
2012-07-04 12:53 ` Paul Walmsley
2012-07-04 14:27 ` Kevin Hilman
2012-07-04 14:53 ` Paul Walmsley
2012-07-04 16:14 ` Benoit Cousson
2012-07-04 16:41 ` Tero Kristo
2012-07-04 16:43 ` Benoit Cousson
2012-07-04 19:02 ` Paul Walmsley
2012-07-04 16:57 ` Benoit Cousson
2012-07-04 18:59 ` Paul Walmsley
2012-07-05 22:06 ` Kevin Hilman
2012-07-04 16:01 ` Benoit Cousson
2012-07-04 19:05 ` Paul Walmsley
2012-06-11 0:46 ` [PATCHv2 03/12] ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby Paul Walmsley
2012-06-11 0:46 ` [PATCHv2 04/12] ARM: OMAP4: hwmod data: fix 32k sync timer idle modes Paul Walmsley
2012-06-11 9:31 ` Cousson, Benoit
2012-06-13 17:22 ` Paul Walmsley
2012-06-11 0:46 ` [PATCHv2 05/12] ARM: OMAP2+: hwmod: add setup_preprogram hook Paul Walmsley
2012-06-11 0:46 ` [PATCHv2 06/12] ARM: OMAP2+: hwmod: add flag to prevent hwmod code from touching IP block during init Paul Walmsley
2012-06-11 0:46 ` [PATCHv2 07/12] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup Paul Walmsley
2012-06-11 6:29 ` Tony Lindgren
2012-06-14 9:49 ` Paul Walmsley
2012-06-14 9:59 ` Tony Lindgren
2012-06-11 0:46 ` [PATCHv2 08/12] ARM: OMAP4: hwmod data: add SL2IF hardreset line Paul Walmsley
2012-06-14 12:55 ` Cousson, Benoit
2012-06-14 17:09 ` Paul Walmsley
2012-06-14 21:07 ` Cousson, Benoit
2012-06-14 23:02 ` Paul Walmsley
2012-06-15 9:11 ` Cousson, Benoit
2012-06-11 0:46 ` [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb) Paul Walmsley
2012-06-11 6:34 ` Tony Lindgren
2012-06-11 7:13 ` Felipe Balbi
2012-06-11 7:41 ` Tony Lindgren
2012-06-11 7:48 ` Felipe Balbi
2012-06-11 8:03 ` Tony Lindgren
2012-06-11 9:12 ` Felipe Balbi
2012-06-11 0:46 ` [PATCHv2 10/12] ARM: OMAP2+: CM: increase the module disable timeout Paul Walmsley
2012-06-11 0:46 ` [PATCHv2 11/12] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks Paul Walmsley
2012-06-11 16:28 ` Cousson, Benoit
2012-06-11 16:59 ` Paul Walmsley
2012-06-11 20:15 ` Cousson, Benoit
2012-06-11 0:46 ` Paul Walmsley [this message]
2012-06-11 9:54 ` [PATCHv2 12/12] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init Cousson, Benoit
2012-10-30 4:05 ` Paul Walmsley
2012-10-30 7:41 ` Péter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120611004626.20034.42995.stgit@dusk \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).