linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 07/12] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
Date: Thu, 14 Jun 2012 02:59:16 -0700	[thread overview]
Message-ID: <20120614095916.GH12766@atomide.com> (raw)
In-Reply-To: <alpine.DEB.2.00.1206140344500.30212@utopia.booyaka.com>

* Paul Walmsley <paul@pwsan.com> [120614 02:53]:
> Hi
> 
> (revised patch below)
> 
> On Sun, 10 Jun 2012, Tony Lindgren wrote:
> 
> > * Paul Walmsley <paul@pwsan.com> [120610 17:56]:
> > 
> > > --- /dev/null
> > > +++ b/include/linux/platform_data/aess.h
> > 
> > This should be include/linux/platform_data/omap-aess.h or similar as
> > there are other aess controllers too.
> 
> Hmm, I guess there could be other SoCs that include this IP block; 
> probably there is nothing OMAP-specific about it.  So I moved this file to 
> include/sound/aess.h.  What do you think?

Sounds good to me.
 
> > > +/*
> > > + * AESS_AUTO_GATING_ENABLE_OFFSET: offset in bytes of the AESS IP
> > > + *     block's AESS_AUTO_GATING_ENABLE__1 register from the IP block's
> > > + *     base address
> > > + */
> > > +#define AESS_AUTO_GATING_ENABLE_OFFSET			0x07c
> > > +
> > > +/* Register bitfields in the AESS_AUTO_GATING_ENABLE__1 register */
> > > +#define AESS_AUTO_GATING_ENABLE_SHIFT			0
> > 
> > Also these should be OMAP_AESS_AUTOGATING etc, or even better,
> > XYZ_AESS_AUTOGATING where XYZ is the type of the AESS controller.
> 
> Hmm, do you think this is really needed?  The other files in include/sound 
> don't have SOUND_ or AUDIO_ prefixe.

No you're right, those parts should follow what the driver is doing.
 
> > This should be static inline function as it's in the header, and again
> > something like omap_aess_enable_autogating.
> 
> I made it static inline, but didn't rename this one by the same rationale 
> above.

OK
 
> > > +/**
> > > + * hwmod_aess_preprogram - enable AESS internal autogating (called by hwmod)
> > > + * @oh: struct omap_hwmod *
> > > + *
> > > + * The AESS will not IdleAck to the PRCM until its internal autogating
> > > + * is enabled.  Since internal autogating is disabled by default after
> > > + * AESS reset, we must enable autogating after the hwmod code resets
> > > + * the AESS.  Returns 0.
> > > + */
> > > +static int __maybe_unused hwmod_aess_preprogram(struct omap_hwmod *oh)
> > > +{
> > > +	void __iomem *va;
> > > +
> > > +	va = omap_hwmod_get_mpu_rt_va(oh);
> > > +	if (!va)
> > > +		return -EINVAL;
> > > +
> > > +	aess_enable_autogating(va);
> > > +
> > > +	return 0;
> > > +}
> > 
> > Then this function should not be in this header, instead it should be a
> > static function somewhere in the omap hwmod code in some .c file. That's
> > because this header should only have omap aess specific driver code, no
> > hwmod code should be needed here.
> 
> Moved this to arch/arm/mach-omap2/omap_hwmod_reset.c and prefixed it with 
> "omap_".
> 
> Are you okay with this approach?

Yup looks good to me, thanks! We should probably get an ack from the
ASoC people for the header changes.

Regards,

Tony
 
 
> - Paul
> 
> From: Paul Walmsley <paul@pwsan.com>
> Date: Thu, 14 Jun 2012 03:35:13 -0600
> Subject: [PATCH] ARM: OMAP4+: AESS: enable internal auto-gating during
>  initial setup
> 
> Enable the AESS auto-gating control bit during AESS hwmod setup.  This
> fixes the following boot warning on OMAP4:
> 
> omap_hwmod: aess: _wait_target_disable failed
> 
> Without this patch, the AESS IP block does not indicate to the PRCM
> that it is idle after it is reset.  This prevents some types of SoC
> power management until something sets the auto-gating control bit.
> 
> This second version of this patch moves the control functions to
> include/linux/platform_data/aess.h at Tony's request:
> 
>     http://www.spinics.net/lists/arm-kernel/msg178329.html
> 
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> Cc: Beno?t Cousson <b-cousson@ti.com>
> Cc: P?ter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: Tony Lindgren <tony@atomide.com>
> ---
>  arch/arm/mach-omap2/Makefile                 |    2 +-
>  arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |    1 +
>  arch/arm/mach-omap2/omap_hwmod_reset.c       |   52 +++++++++++++++++++++++++
>  arch/arm/plat-omap/include/plat/omap_hwmod.h |    5 +++
>  include/sound/aess.h                         |   53 ++++++++++++++++++++++++++
>  5 files changed, 112 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/mach-omap2/omap_hwmod_reset.c
>  create mode 100644 include/sound/aess.h
> 
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index fa742f3..4381e04 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -7,7 +7,7 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
>  	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
>  
>  omap-2-3-common				= irq.o sdrc.o
> -hwmod-common				= omap_hwmod.o \
> +hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
>  					  omap_hwmod_common_data.o
>  clock-common				= clock.o clock_common_data.o \
>  					  clkt_dpll.o clkt_clksel.o
> diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> index 6b0aedc..d1c4f3c 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> @@ -313,6 +313,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_aess_sysc = {
>  static struct omap_hwmod_class omap44xx_aess_hwmod_class = {
>  	.name	= "aess",
>  	.sysc	= &omap44xx_aess_sysc,
> +	.setup_preprogram = omap_hwmod_aess_preprogram,
>  };
>  
>  /* aess */
> diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c
> new file mode 100644
> index 0000000..f810ba3
> --- /dev/null
> +++ b/arch/arm/mach-omap2/omap_hwmod_reset.c
> @@ -0,0 +1,52 @@
> +/*
> + * OMAP IP block custom reset and preprogramming stubs
> + *
> + * Copyright (C) 2012 Texas Instruments, Inc.
> + * Paul Walmsley
> + *
> + * A small number of IP blocks need custom reset and preprogramming
> + * functions.  The stubs in this file provide a standard way for the
> + * hwmod code to call these functions, which are to be located under
> + * drivers/.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +#include <linux/kernel.h>
> +
> +#include <plat/omap_hwmod.h>
> +
> +#include <sound/aess.h>
> +
> +/**
> + * omap_hwmod_aess_preprogram - enable AESS internal autogating
> + * @oh: struct omap_hwmod *
> + *
> + * The AESS will not IdleAck to the PRCM until its internal autogating
> + * is enabled.  Since internal autogating is disabled by default after
> + * AESS reset, we must enable autogating after the hwmod code resets
> + * the AESS.  Returns 0.
> + */
> +int omap_hwmod_aess_preprogram(struct omap_hwmod *oh)
> +{
> +	void __iomem *va;
> +
> +	va = omap_hwmod_get_mpu_rt_va(oh);
> +	if (!va)
> +		return -EINVAL;
> +
> +	aess_enable_autogating(va);
> +
> +	return 0;
> +}
> diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
> index b5f3efc..76fea1f 100644
> --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
> +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
> @@ -662,6 +662,11 @@ extern int omap2430_hwmod_init(void);
>  extern int omap3xxx_hwmod_init(void);
>  extern int omap44xx_hwmod_init(void);
>  
> +/* Custom reset & preprogram stub prototypes - from omap_hwmod_reset.c */
> +
> +extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
> +
> +
>  extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
>  
>  #endif
> diff --git a/include/sound/aess.h b/include/sound/aess.h
> new file mode 100644
> index 0000000..cee0d09
> --- /dev/null
> +++ b/include/sound/aess.h
> @@ -0,0 +1,53 @@
> +/*
> + * AESS IP block reset
> + *
> + * Copyright (C) 2012 Texas Instruments, Inc.
> + * Paul Walmsley
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +#ifndef __SOUND_AESS_H__
> +#define __SOUND_AESS_H__
> +
> +#include <linux/kernel.h>
> +#include <linux/io.h>
> +
> +/*
> + * AESS_AUTO_GATING_ENABLE_OFFSET: offset in bytes of the AESS IP
> + *     block's AESS_AUTO_GATING_ENABLE__1 register from the IP block's
> + *     base address
> + */
> +#define AESS_AUTO_GATING_ENABLE_OFFSET			0x07c
> +
> +/* Register bitfields in the AESS_AUTO_GATING_ENABLE__1 register */
> +#define AESS_AUTO_GATING_ENABLE_SHIFT			0
> +
> +/**
> + * aess_enable_autogating - enable AESS internal autogating
> + * @oh: struct omap_hwmod *
> + *
> + * Enable internal autogating on the AESS.  This allows the AESS to
> + * indicate that it is idle to the OMAP PRCM.  Returns 0.
> + */
> +static inline void aess_enable_autogating(void __iomem *base)
> +{
> +	u32 v;
> +
> +	/* Set AESS_AUTO_GATING_ENABLE__1.ENABLE to allow idle entry */
> +	v = 1 << AESS_AUTO_GATING_ENABLE_SHIFT;
> +	writel(v, base + AESS_AUTO_GATING_ENABLE_OFFSET);
> +}
> +
> +#endif /* __SOUND_AESS_H__ */
> -- 
> 1.7.10

  reply	other threads:[~2012-06-14  9:59 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-11  0:45 [PATCHv2 00/12] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc Paul Walmsley
2012-06-11  0:45 ` [PATCHv2 01/12] ARM: OMAP: PM: Lock clocks list while generating summary Paul Walmsley
2012-06-11  0:45 ` [PATCHv2 02/12] ARM: OMAP2+: hwmod code/data: fix 32K sync timer Paul Walmsley
2012-06-14 16:47   ` Cousson, Benoit
2012-06-14 18:04     ` Paul Walmsley
2012-06-14 20:13       ` Cousson, Benoit
2012-06-15  0:18         ` Paul Walmsley
2012-06-15 13:28           ` Cousson, Benoit
2012-07-04 12:48             ` Paul Walmsley
2012-07-04 12:53               ` Paul Walmsley
2012-07-04 14:27                 ` Kevin Hilman
2012-07-04 14:53                   ` Paul Walmsley
2012-07-04 16:14                   ` Benoit Cousson
2012-07-04 16:41                     ` Tero Kristo
2012-07-04 16:43                       ` Benoit Cousson
2012-07-04 19:02                         ` Paul Walmsley
2012-07-04 16:57                 ` Benoit Cousson
2012-07-04 18:59                   ` Paul Walmsley
2012-07-05 22:06                     ` Kevin Hilman
2012-07-04 16:01               ` Benoit Cousson
2012-07-04 19:05                 ` Paul Walmsley
2012-06-11  0:46 ` [PATCHv2 03/12] ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby Paul Walmsley
2012-06-11  0:46 ` [PATCHv2 04/12] ARM: OMAP4: hwmod data: fix 32k sync timer idle modes Paul Walmsley
2012-06-11  9:31   ` Cousson, Benoit
2012-06-13 17:22     ` Paul Walmsley
2012-06-11  0:46 ` [PATCHv2 05/12] ARM: OMAP2+: hwmod: add setup_preprogram hook Paul Walmsley
2012-06-11  0:46 ` [PATCHv2 06/12] ARM: OMAP2+: hwmod: add flag to prevent hwmod code from touching IP block during init Paul Walmsley
2012-06-11  0:46 ` [PATCHv2 07/12] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup Paul Walmsley
2012-06-11  6:29   ` Tony Lindgren
2012-06-14  9:49     ` Paul Walmsley
2012-06-14  9:59       ` Tony Lindgren [this message]
2012-06-11  0:46 ` [PATCHv2 08/12] ARM: OMAP4: hwmod data: add SL2IF hardreset line Paul Walmsley
2012-06-14 12:55   ` Cousson, Benoit
2012-06-14 17:09     ` Paul Walmsley
2012-06-14 21:07       ` Cousson, Benoit
2012-06-14 23:02         ` Paul Walmsley
2012-06-15  9:11           ` Cousson, Benoit
2012-06-11  0:46 ` [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb) Paul Walmsley
2012-06-11  6:34   ` Tony Lindgren
2012-06-11  7:13     ` Felipe Balbi
2012-06-11  7:41       ` Tony Lindgren
2012-06-11  7:48         ` Felipe Balbi
2012-06-11  8:03           ` Tony Lindgren
2012-06-11  9:12             ` Felipe Balbi
2012-06-11  0:46 ` [PATCHv2 10/12] ARM: OMAP2+: CM: increase the module disable timeout Paul Walmsley
2012-06-11  0:46 ` [PATCHv2 11/12] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks Paul Walmsley
2012-06-11 16:28   ` Cousson, Benoit
2012-06-11 16:59     ` Paul Walmsley
2012-06-11 20:15       ` Cousson, Benoit
2012-06-11  0:46 ` [PATCHv2 12/12] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init Paul Walmsley
2012-06-11  9:54   ` Cousson, Benoit
2012-10-30  4:05     ` Paul Walmsley
2012-10-30  7:41       ` Péter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120614095916.GH12766@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).