From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 0/7] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc
Date: Mon, 18 Jun 2012 00:15:54 -0600 [thread overview]
Message-ID: <20120618061037.30632.28539.stgit@dusk> (raw)
Hi,
Here is an initial set of fixes for power management and OMAP core
infrastructure for 3.5-rc. Most of these patches address boot
warnings and power management problems on OMAP4, although a few of
them address more general issues.
Thanks to (in alphabetical order) Beno?t Cousson, Tero Kristo, Kevin
Hilman, Vaibhav Hiremath, and Tony Lindgren for help with this series.
Compile- and boot-test information is below. Note that on OMAP3,
return from suspend when off-mode is enabled is via GPIO buttons due to:
http://www.spinics.net/lists/arm-kernel/msg173688.html
Boot logs are available from:
http://www.pwsan.com/omap/bootlogs/20120617/omap_fixes_a_3.5rc__52a5ae406dadef781bfcf3a641dae2064e9697ff/
These patches are available via git from git://git.pwsan.com/linux-2.6
in the branch 'omap_fixes_a_3.5rc'.
This third version adds a fix for a new sparse warning, and drops
everything that is still being commented on or reviewed or which needs
acks. Hopefully those will make it into a future 3.5-rc series.
- Paul
---
object size (delta in bytes from v3.5-rc3 (485802a6c524e62b5924849dd727ddbb1497cc71)):
text data bss total kernel
0 0 0 0 5912osk_testconfig/vmlinux
+32 0 0 +32 n800_multi_omap2xxx/vmlinux
+64 0 0 +64 n800_testconfig/vmlinux
0 0 0 0 omap1510_defconfig/vmlinux
0 0 0 0 omap1_defconfig/vmlinux
+64 0 0 +64 omap2_4_testconfig/vmlinux
+4160 0 0 +4160 omap2plus_defconfig/vmlinux
0 0 0 0 omap2plus_no_pm/vmlinux
0 0 0 0 omap3_4_testconfig/vmlinux
0 0 0 0 omap3_testconfig/vmlinux
+64 0 0 +64 omap4_testconfig/vmlinux
Djamil Elaidi (1):
ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby
Paul Walmsley (5):
ARM: OMAP2+: hwmod code/data: fix 32K sync timer
ARM: OMAP4: hwmod data: fix 32k sync timer idle modes
ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks
ARM: OMAP2+: CM: increase the module disable timeout
ARM: OMAP2+: mux: fix sparse warning
Todd Poynor (1):
ARM: OMAP: PM: Lock clocks list while generating summary
arch/arm/mach-omap2/clock44xx_data.c | 5 +++++
arch/arm/mach-omap2/cm.h | 11 ++++++++++
arch/arm/mach-omap2/cminst44xx.c | 4 ++--
arch/arm/mach-omap2/mux.c | 1 +
arch/arm/mach-omap2/omap_hwmod.c | 28 ++++++++++++++++++--------
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++---
arch/arm/plat-omap/clock.c | 2 ++
arch/arm/plat-omap/include/plat/omap_hwmod.h | 9 ++++++++
9 files changed, 53 insertions(+), 15 deletions(-)
next reply other threads:[~2012-06-18 6:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-18 6:15 Paul Walmsley [this message]
2012-06-18 6:15 ` [PATCHv3 1/7] ARM: OMAP: PM: Lock clocks list while generating summary Paul Walmsley
2012-06-18 6:16 ` [PATCHv3 2/7] ARM: OMAP2+: hwmod code/data: fix 32K sync timer Paul Walmsley
2012-06-18 6:16 ` [PATCHv3 3/7] ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby Paul Walmsley
2012-06-18 6:16 ` [PATCHv3 4/7] ARM: OMAP4: hwmod data: fix 32k sync timer idle modes Paul Walmsley
2012-06-18 6:16 ` [PATCHv3 5/7] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks Paul Walmsley
2012-06-18 9:35 ` Cousson, Benoit
2012-06-18 15:45 ` Paul Walmsley
2012-06-18 21:36 ` Cousson, Benoit
2012-06-18 6:16 ` [PATCHv3 6/7] ARM: OMAP2+: CM: increase the module disable timeout Paul Walmsley
2012-06-19 12:46 ` Sergei Shtylyov
2012-06-21 21:10 ` Paul Walmsley
2012-06-18 6:16 ` [PATCHv3 7/7] ARM: OMAP2+: mux: fix sparse warning Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120618061037.30632.28539.stgit@dusk \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).