Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: linuxzsc@gmail.com (Richard Zhao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] usb: chipidea: ci13xxx-imx: add "dr_role" property to device tree bindings
Date: Wed, 27 Jun 2012 21:11:18 +0800	[thread overview]
Message-ID: <20120627131115.GB2256@richard-laptop> (raw)
In-Reply-To: <1340799710-32696-4-git-send-email-mkl@pengutronix.de>

On Wed, Jun 27, 2012 at 02:21:50PM +0200, Marc Kleine-Budde wrote:
> This patch allows the device tree to limit the chipidea to host or
> peripheral mode only.
> 
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> ---
>  .../devicetree/bindings/usb/ci13xxx-imx.txt        |    4 ++
>  arch/arm/boot/dts/imx28.dtsi                       |    1 +
>  drivers/usb/chipidea/ci13xxx_imx.c                 |    3 ++
>  drivers/usb/chipidea/core.c                        |   40 +++++++++++++++++---
>  include/linux/usb/chipidea.h                       |    9 +++++
>  5 files changed, 51 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> index 8bcd071..f55f2d5 100644
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> @@ -4,6 +4,9 @@ Required properties:
>  - compatible: Should be "fsl,imx27-usb"
>  - reg: Should contain registers location and length
>  - interrupts: Should contain controller interrupt
> +- dr_mode: indicates the working mode for "fsl,imx27-usb" compatible
                                              ^^^^^^^^^^^^^
The word seems redundant?
> +  controllers. Can be "host", "peripheral", or "otg". Defaults to
> +  "otg" if not defined.
How about fsl,force-role = "host" or "gadget" ?
or fsl,force-host and fsl,force-gadget properties.
If you're trying to make it generic, do anyone else have the case
besides imx?
>  
>  Optional properties:
>  - fsl,usbphy: phandler of usb phy that connects to the only one port
> @@ -17,4 +20,5 @@ usb at 02184000 { /* USB OTG */
>  	interrupts = <0 43 0x04>;
>  	fsl,usbphy = <&usbphy1>;
>  	fsl,vbus-power-gpios = <&gpio3 22 0>;
> +	dr_mode= "otg";
>  };
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 65d6ae3..9cbf9b9 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
You can not put arch/ part in the same patch.
> @@ -467,6 +467,7 @@
>  			interrupts = <93>;
>  			fsl,usbphy = <&usbphy0>;
>  			status = "disabled";
> +			dr_mode = "host";
>  		};
>  
>  		usb1: usb at 80090000 {
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> index efae2be..8e926fb 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -120,6 +120,9 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
>  		*pdev->dev.dma_mask = DMA_BIT_MASK(32);
>  		dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
>  	}
> +
> +	ci13xxx_get_dr_mode(pdev->dev.of_node, &ci13xxx_imx_platdata);
> +
>  	plat_ci = ci13xxx_add_device(&pdev->dev,
>  				pdev->resource, pdev->num_resources,
>  				&ci13xxx_imx_platdata);
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 1083585..89d2cae 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -63,6 +63,7 @@
>  #include <linux/kernel.h>
>  #include <linux/slab.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/of_platform.h>
It makes core code depends on of. Do you really mean it?

Thanks
Richard
>  #include <linux/usb/ch9.h>
>  #include <linux/usb/gadget.h>
>  #include <linux/usb/otg.h>
> @@ -386,6 +387,23 @@ void ci13xxx_remove_device(struct platform_device *pdev)
>  }
>  EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
>  
> +void ci13xxx_get_dr_mode(struct device_node *of_node, struct ci13xxx_platform_data *pdata)
> +{
> +	const unsigned char *dr_mode;
> +
> +	dr_mode = of_get_property(of_node, "dr_mode", NULL);
> +	if (!dr_mode)
> +		return;
> +
> +	if (!strcmp(dr_mode, "host"))
> +		pdata->flags |= CI13XXX_DR_MODE_HOST;
> +	else if (!strcmp(dr_mode, "peripheral"))
> +		pdata->flags |= CI13XXX_DR_MODE_PERIPHERAL;
> +	else if (!strcmp(dr_mode, "otg"))
> +		pdata->flags |= CI13XXX_DR_MODE_OTG;
> +}
> +EXPORT_SYMBOL_GPL(ci13xxx_get_dr_mode);
> +
>  static int __devinit ci_hdrc_probe(struct platform_device *pdev)
>  {
>  	struct device	*dev = &pdev->dev;
> @@ -446,13 +464,23 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
>  	}
>  
>  	/* initialize role(s) before the interrupt is requested */
> -	ret = ci_hdrc_host_init(ci);
> -	if (ret)
> -		dev_info(dev, "doesn't support host\n");
> +	/* default to otg */
> +	if (!(ci->platdata->flags & CI13XXX_DR_MODE_MASK))
> +		ci->platdata->flags |= CI13XXX_DR_MODE_OTG;
> +
> +	if (ci->platdata->flags &
> +	    (CI13XXX_DR_MODE_HOST | CI13XXX_DR_MODE_OTG)) {
> +		ret = ci_hdrc_host_init(ci);
> +		if (ret)
> +			dev_info(dev, "doesn't support host\n");
> +	}
>  
> -	ret = ci_hdrc_gadget_init(ci);
> -	if (ret)
> -		dev_info(dev, "doesn't support gadget\n");
> +	if (ci->platdata->flags &
> +	    (CI13XXX_DR_MODE_PERIPHERAL | CI13XXX_DR_MODE_OTG)) {
> +		ret = ci_hdrc_gadget_init(ci);
> +		if (ret)
> +			dev_info(dev, "doesn't support gadget\n");
> +	}
>  
>  	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
>  		dev_err(dev, "no supported roles\n");
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index 544825d..29ad908 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -19,6 +19,12 @@ struct ci13xxx_platform_data {
>  #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
>  #define CI13XXX_PULLUP_ON_VBUS		BIT(2)
>  #define CI13XXX_DISABLE_STREAMING	BIT(3)
> +#define CI13XXX_DR_MODE_HOST		BIT(4)
> +#define CI13XXX_DR_MODE_PERIPHERAL	BIT(5)
> +#define CI13XXX_DR_MODE_OTG		BIT(6)
> +#define CI13XXX_DR_MODE_MASK \
> +	(CI13XXX_DR_MODE_HOST | CI13XXX_DR_MODE_PERIPHERAL | \
> +	 CI13XXX_DR_MODE_OTG)
>  
>  #define CI13XXX_CONTROLLER_RESET_EVENT		0
>  #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
> @@ -35,4 +41,7 @@ struct platform_device *ci13xxx_add_device(struct device *dev,
>  /* Remove ci13xxx device */
>  void ci13xxx_remove_device(struct platform_device *pdev);
>  
> +/* Parse of-tree "dr_mode" property */
> +void ci13xxx_get_dr_mode(struct device_node *of_node, struct ci13xxx_platform_data *pdata);
> +
>  #endif
> -- 
> 1.7.10
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2012-06-27 13:11 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-27 12:21 [PATCH 0/3] usb: chipidea: fix error handling and add dr_role property Marc Kleine-Budde
2012-06-27 12:21 ` [PATCH 1/3] usb: chipidea: pci: make platformdata static Marc Kleine-Budde
2012-06-27 12:21 ` [PATCH 2/3] usb: chipidea: udc: fix error path in udc_start() Marc Kleine-Budde
2012-06-27 12:21 ` [PATCH 3/3] usb: chipidea: ci13xxx-imx: add "dr_role" property to device tree bindings Marc Kleine-Budde
2012-06-27 13:11   ` Richard Zhao [this message]
2012-06-27 13:21     ` Marc Kleine-Budde
2012-06-27 12:42 ` [PATCH 0/3] usb: chipidea: fix error handling and add dr_role property Richard Zhao
2012-06-27 12:49   ` Marc Kleine-Budde
2012-06-27 13:06     ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120627131115.GB2256@richard-laptop \
    --to=linuxzsc@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox