From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Wed, 27 Jun 2012 20:15:42 +0100 Subject: [PATCH 1/4] mtd: lpc32xx_slc: Select AMBA_PL08X in Kconfig In-Reply-To: <1340812275-1197-1-git-send-email-stigge@antcom.de> References: <1340812275-1197-1-git-send-email-stigge@antcom.de> Message-ID: <20120627191542.GC25319@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Jun 27, 2012 at 05:51:12PM +0200, Roland Stigge wrote: > From: Alexandre Pereira da Silva > > Since this driver depends on the amba pl08x dma driver, select it in Kconfig. > > Signed-off-by: Alexandre Pereira da Silva > Signed-off-by: Roland Stigge > --- > drivers/mtd/nand/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig > index de69978..a9e8b73 100644 > --- a/drivers/mtd/nand/Kconfig > +++ b/drivers/mtd/nand/Kconfig > @@ -417,6 +417,7 @@ config MTD_NAND_PXA3xx > config MTD_NAND_SLC_LPC32XX > tristate "NXP LPC32xx SLC Controller" > depends on ARCH_LPC32XX > + select AMBA_PL08X > help > Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell > chips) NAND controller. This is the default for the PHYTEC 3250 Surely not? Drivers using DMA engine really should not depend on any particular DMA engine implementation.