[PATCH] ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge

[tony@atomide.com (Tony Lindgren)]

* Kevin Hilman <khilman@ti.com> [120629 07:08]:
> commit 99b59df0 (ARM: OMAP3: PM: fix shared PRCM interrupt leave
> disabled at boot) added IRQ_NOAUTOEN to the PRCM interrupt so it could
> be enabled later if needed.  However, this commit was partially undone
> when merging the IO daisy chain rework in 9a17d88e (Merge tag
> 'omap-devel-c-for-3.6' of
> git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into
> devel-pm
> 
> This patch adds back the IRQ_NOAUTOEN fix that was removed by the
> merge resolution.
> 
> This also fixes the following boot-time warning that showed up after
> merging the IO daisy chain rework:
> 
> [    3.849334] WARNING: at kernel/irq/manage.c:436 enable_irq+0x3c/0x78()
> [    3.856231] Unbalanced enable for IRQ 297
> [    3.860473] Modules linked in:
> [    3.863739] [<c001a114>] (unwind_backtrace+0x0/0xf0) from [<c003c7e8>] (warn_slowpath_common+0x4c/0x64)
> [    3.873687] [<c003c7e8>] (warn_slowpath_common+0x4c/0x64) from [<c003c894>] (warn_slowpath_fmt+0x30/0x40)
> [    3.883819] [<c003c894>] (warn_slowpath_fmt+0x30/0x40) from [<c00993e0>] (enable_irq+0x3c/0x78)
> [    3.893035] [<c00993e0>] (enable_irq+0x3c/0x78) from [<c067b1e8>] (omap3_pm_init+0x328/0x5f4)
> [    3.902099] [<c067b1e8>] (omap3_pm_init+0x328/0x5f4) from [<c067161c>] (init_machine_late+0x1c/0x28)
> [    3.911773] [<c067161c>] (init_machine_late+0x1c/0x28) from [<c0008648>] (do_one_initcall+0x34/0x178)
> [    3.921539] [<c0008648>] (do_one_initcall+0x34/0x178) from [<c066e8f4>] (kernel_init+0xfc/0x1c0)
> [    3.930847] [<c066e8f4>] (kernel_init+0xfc/0x1c0) from [<c00140b0>] (kernel_thread_exit+0x0/0x8)
> [    3.940246] ---[ end trace 55a0ad32ca2ca682 ]---
> 
> Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
> Cc: Paul Walmsley <paul@pwsan.com>
> Signed-off-by: Kevin Hilman <khilman@ti.com>
> ---
> Tony, this applies on top of your current devel-pm branch.

Thanks applying into devel-pm.

Tony