* [GIT PULL] at91: first batch of cleanup for 3.6
@ 2012-07-02 13:00 Nicolas Ferre
2012-07-02 20:58 ` Arnd Bergmann
0 siblings, 1 reply; 6+ messages in thread
From: Nicolas Ferre @ 2012-07-02 13:00 UTC (permalink / raw)
To: linux-arm-kernel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Arnd, Olof,
The following changes since commit
6887a4131da3adaab011613776d865f4bcfb5678:
Linux 3.5-rc5 (2012-06-30 16:08:57 -0700)
are available in the git repository at:
git://github.com/at91linux/linux-at91.git tags/at91-for-next-cleanup
for you to fetch changes up to c4b68520dc0ec96153bc0d87bca5ffba508edfcf:
ARM: at91: add AIC5 support (2012-07-02 14:31:00 +0200)
- ----------------------------------------------------------------
A series about interrupt controller cleanup. AT91 AIC is moving to
fasteoi type of handler and sparse IRQ.
The Device Tree support is added to take into account priority
and external IRQ.
In addition to that, the new AIC5 IP is introduced.
- ----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (1):
ARM: at91: aic add dt support for external irqs
Ludovic Desroches (8):
ARM: at91: fix at91_aic_write macro
ARM: at91: aic can use fast eoi handler type
ARM: at91: add of irq priorities support
ARM: at91: remove static irq priorities for sam9x5
ARM: at91: at91 based machines specify their own irq handler at
run time
ARM: at91: sparse irq support
ARM: at91: remove mach/irqs.h
ARM: at91: add AIC5 support
Paul Bolle (1):
ARM: at91: remove two unused headers
.../devicetree/bindings/arm/atmel-aic.txt | 9 +-
arch/arm/boot/dts/at91sam9260.dtsi | 37 +-
arch/arm/boot/dts/at91sam9263.dtsi | 31 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 39 +-
arch/arm/boot/dts/at91sam9n12.dtsi | 30 +-
arch/arm/boot/dts/at91sam9x5.dtsi | 39 +-
arch/arm/kernel/irq.c | 10 -
arch/arm/mach-at91/Kconfig | 2 +
arch/arm/mach-at91/at91rm9200.c | 1 +
arch/arm/mach-at91/at91rm9200_devices.c | 84 ++--
arch/arm/mach-at91/at91sam9260.c | 1 +
arch/arm/mach-at91/at91sam9260_devices.c | 92 ++---
arch/arm/mach-at91/at91sam9261.c | 1 +
arch/arm/mach-at91/at91sam9261_devices.c | 68 ++--
arch/arm/mach-at91/at91sam9263.c | 1 +
arch/arm/mach-at91/at91sam9263_devices.c | 80 ++--
arch/arm/mach-at91/at91sam926x_time.c | 2 +-
arch/arm/mach-at91/at91sam9g45.c | 1 +
arch/arm/mach-at91/at91sam9g45_devices.c | 108 ++---
arch/arm/mach-at91/at91sam9rl.c | 1 +
arch/arm/mach-at91/at91sam9rl_devices.c | 76 ++--
arch/arm/mach-at91/at91sam9x5.c | 40 --
arch/arm/mach-at91/at91x40.c | 1 +
arch/arm/mach-at91/board-1arm.c | 2 +
arch/arm/mach-at91/board-afeb-9260v1.c | 2 +
arch/arm/mach-at91/board-cam60.c | 2 +
arch/arm/mach-at91/board-carmeva.c | 2 +
arch/arm/mach-at91/board-cpu9krea.c | 2 +
arch/arm/mach-at91/board-cpuat91.c | 2 +
arch/arm/mach-at91/board-csb337.c | 2 +
arch/arm/mach-at91/board-csb637.c | 2 +
arch/arm/mach-at91/board-dt.c | 2 +
arch/arm/mach-at91/board-eb01.c | 2 +
arch/arm/mach-at91/board-eb9200.c | 2 +
arch/arm/mach-at91/board-ecbat91.c | 2 +
arch/arm/mach-at91/board-eco920.c | 2 +
arch/arm/mach-at91/board-flexibity.c | 2 +
arch/arm/mach-at91/board-foxg20.c | 2 +
arch/arm/mach-at91/board-gsia18s.c | 2 +
arch/arm/mach-at91/board-kafa.c | 2 +
arch/arm/mach-at91/board-kb9202.c | 2 +
arch/arm/mach-at91/board-neocore926.c | 2 +
arch/arm/mach-at91/board-pcontrol-g20.c | 2 +
arch/arm/mach-at91/board-picotux200.c | 2 +
arch/arm/mach-at91/board-qil-a9260.c | 2 +
arch/arm/mach-at91/board-rm9200dk.c | 2 +
arch/arm/mach-at91/board-rm9200ek.c | 2 +
arch/arm/mach-at91/board-rsi-ews.c | 2 +
arch/arm/mach-at91/board-sam9-l9260.c | 2 +
arch/arm/mach-at91/board-sam9260ek.c | 2 +
arch/arm/mach-at91/board-sam9261ek.c | 2 +
arch/arm/mach-at91/board-sam9263ek.c | 2 +
arch/arm/mach-at91/board-sam9g20ek.c | 3 +
arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +
arch/arm/mach-at91/board-sam9rlek.c | 2 +
arch/arm/mach-at91/board-snapper9260.c | 2 +
arch/arm/mach-at91/board-stamp9g20.c | 3 +
arch/arm/mach-at91/board-usb-a926x.c | 4 +
arch/arm/mach-at91/board-yl-9200.c | 2 +
arch/arm/mach-at91/generic.h | 2 +
arch/arm/mach-at91/gpio.c | 9 +-
arch/arm/mach-at91/include/mach/at91_aic.h | 36 +-
arch/arm/mach-at91/include/mach/at91_spi.h | 81 ----
arch/arm/mach-at91/include/mach/at91_ssc.h | 106 -----
arch/arm/mach-at91/include/mach/entry-macro.S | 27 --
arch/arm/mach-at91/include/mach/irqs.h | 48 ---
arch/arm/mach-at91/irq.c | 413
+++++++++++++++++---
arch/arm/mach-at91/pm.c | 1 +
68 files changed, 835 insertions(+), 718 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/at91_spi.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91_ssc.h
delete mode 100644 arch/arm/mach-at91/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-at91/include/mach/irqs.h
Thanks, best regards,
- --
Nicolas Ferre
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJP8ZtmAAoJEAf03oE53VmQkZoIAKiDMeHdLJXuvZDc0Mt3JvOg
dDB+k8dfyW3IpEjxcn1pfhki9mnOC/EWHYYGrzxwzHZNMgArI7JjgHZq2wfuZJfZ
Hv0raEBnQxXwPxQYt9ZOagdVw0sWVQ3Pj98uxSFQPS43U7M9tW5bjdLOAJZwpvQW
MQcY5+cfAfeP8AOdwNVrlE/KkmvIl4FlikweSzJBA2IYE+djr7YJ5mVUp1Uuj+NQ
AzYc2qnMMPd1fjGXQzR6hpljjhDiMQlC7RXHEGJCIkFNg5noEHGRE0vxesdrLI8N
d4MkXhIQKVbuZhmAIrV7v2EtvJp7Wv+htTfjh+nnZsEYCxbR0AJnOXrj9yroMYM=
=FPgl
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 6+ messages in thread* [GIT PULL] at91: first batch of cleanup for 3.6 2012-07-02 13:00 [GIT PULL] at91: first batch of cleanup for 3.6 Nicolas Ferre @ 2012-07-02 20:58 ` Arnd Bergmann 2012-07-04 7:42 ` Arnd Bergmann 0 siblings, 1 reply; 6+ messages in thread From: Arnd Bergmann @ 2012-07-02 20:58 UTC (permalink / raw) To: linux-arm-kernel On Monday 02 July 2012, Nicolas Ferre wrote: > The following changes since commit > 6887a4131da3adaab011613776d865f4bcfb5678: > > Linux 3.5-rc5 (2012-06-30 16:08:57 -0700) > > are available in the git repository at: > > git://github.com/at91linux/linux-at91.git tags/at91-for-next-cleanup Pulled into next/cleanup Thanks, Arnd ^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] at91: first batch of cleanup for 3.6 2012-07-02 20:58 ` Arnd Bergmann @ 2012-07-04 7:42 ` Arnd Bergmann 2012-07-04 8:01 ` ludovic.desroches 2012-07-04 9:55 ` Nicolas Ferre 0 siblings, 2 replies; 6+ messages in thread From: Arnd Bergmann @ 2012-07-04 7:42 UTC (permalink / raw) To: linux-arm-kernel On Monday 02 July 2012, Arnd Bergmann wrote: > On Monday 02 July 2012, Nicolas Ferre wrote: > > The following changes since commit > > 6887a4131da3adaab011613776d865f4bcfb5678: > > > > Linux 3.5-rc5 (2012-06-30 16:08:57 -0700) > > > > are available in the git repository at: > > > > git://github.com/at91linux/linux-at91.git tags/at91-for-next-cleanup > > Pulled into next/cleanup Unfortunately, I got a bunch of new builf errors and warnings: 8<---- ARM: at91: fix new build errors MULTI_IRQ_HANDLER and SPARSE_IRQ are now required everywhere because mach/irqs.h and mach/entry-macros.S are gone but the symbols are only selected for AT91SAM9, not for the NOMMU parts. A few files now need to include linux/io.h directly, which used to be included through other headers that have changed. The new at91_aic_irq_priorities variable is only used with CONFIG_OF enabled and should not be visible otherwise. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- Please check these patches for correctness, and try to be more careful to avoid such problems in the future. I found these just building the defconfig files, not even invoking my randconfig scripts. Arnd diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 7d0c40a..c8050b1 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -37,6 +37,8 @@ config SOC_AT91SAM9 config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 @@ -142,6 +144,8 @@ config ARCH_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 4c0f5fd..46090e6 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/io.h> #include <asm/proc-fns.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index c5eaaa0..1e02c0e 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -49,7 +49,6 @@ static struct irq_domain *at91_aic_domain; static struct device_node *at91_aic_np; static unsigned int n_irqs = NR_AIC_IRQS; static unsigned long at91_aic_caps = 0; -static unsigned int *at91_aic_irq_priorities; /* AIC5 introduces a Source Select Register */ #define AT91_AIC_CAP_AIC5 (1 << 0) @@ -359,6 +358,8 @@ static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) } #if defined(CONFIG_OF) +static unsigned int *at91_aic_irq_priorities; + static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index dc474bc..fca9790 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -27,6 +27,7 @@ #include <linux/interrupt.h> #include <linux/ioctl.h> #include <linux/completion.h> +#include <linux/io.h> #include <asm/uaccess.h> ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [GIT PULL] at91: first batch of cleanup for 3.6 2012-07-04 7:42 ` Arnd Bergmann @ 2012-07-04 8:01 ` ludovic.desroches 2012-07-04 9:55 ` Nicolas Ferre 1 sibling, 0 replies; 6+ messages in thread From: ludovic.desroches @ 2012-07-04 8:01 UTC (permalink / raw) To: linux-arm-kernel Le 07/04/2012 09:42 AM, Arnd Bergmann a ?crit : > On Monday 02 July 2012, Arnd Bergmann wrote: >> On Monday 02 July 2012, Nicolas Ferre wrote: >>> The following changes since commit >>> 6887a4131da3adaab011613776d865f4bcfb5678: >>> >>> Linux 3.5-rc5 (2012-06-30 16:08:57 -0700) >>> >>> are available in the git repository at: >>> >>> git://github.com/at91linux/linux-at91.git tags/at91-for-next-cleanup >> >> Pulled into next/cleanup > > Unfortunately, I got a bunch of new builf errors and warnings: > > 8<---- > ARM: at91: fix new build errors > > MULTI_IRQ_HANDLER and SPARSE_IRQ are now required everywhere because > mach/irqs.h and mach/entry-macros.S are gone but the symbols are > only selected for AT91SAM9, not for the NOMMU parts. > > A few files now need to include linux/io.h directly, which used to > be included through other headers that have changed. > > The new at91_aic_irq_priorities variable is only used with CONFIG_OF > enabled and should not be visible otherwise. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > > Please check these patches for correctness, and try to be more careful > to avoid such problems in the future. I found these just building the > defconfig files, not even invoking my randconfig scripts. > > Arnd > Hi, Patches are ok for me. Sorry for this issue, I've tested it on several boards but not these two ones and I didn't notice they don't select AT91SAM9. Regards Ludovic > diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > index 7d0c40a..c8050b1 100644 > --- a/arch/arm/mach-at91/Kconfig > +++ b/arch/arm/mach-at91/Kconfig > @@ -37,6 +37,8 @@ config SOC_AT91SAM9 > config SOC_AT91RM9200 > bool "AT91RM9200" > select CPU_ARM920T > + select MULTI_IRQ_HANDLER > + select SPARSE_IRQ > select GENERIC_CLOCKEVENTS > select HAVE_AT91_DBGU0 > > @@ -142,6 +144,8 @@ config ARCH_AT91SAM9G45 > config ARCH_AT91X40 > bool "AT91x40" > depends on !MMU > + select MULTI_IRQ_HANDLER > + select SPARSE_IRQ > select ARCH_USES_GETTIMEOFFSET > > endchoice > diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c > index 4c0f5fd..46090e6 100644 > --- a/arch/arm/mach-at91/at91x40.c > +++ b/arch/arm/mach-at91/at91x40.c > @@ -13,6 +13,7 @@ > #include <linux/kernel.h> > #include <linux/init.h> > #include <linux/irq.h> > +#include <linux/io.h> > #include <asm/proc-fns.h> > #include <asm/system_misc.h> > #include <asm/mach/arch.h> > diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c > index c5eaaa0..1e02c0e 100644 > --- a/arch/arm/mach-at91/irq.c > +++ b/arch/arm/mach-at91/irq.c > @@ -49,7 +49,6 @@ static struct irq_domain *at91_aic_domain; > static struct device_node *at91_aic_np; > static unsigned int n_irqs = NR_AIC_IRQS; > static unsigned long at91_aic_caps = 0; > -static unsigned int *at91_aic_irq_priorities; > > /* AIC5 introduces a Source Select Register */ > #define AT91_AIC_CAP_AIC5 (1 << 0) > @@ -359,6 +358,8 @@ static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) > } > > #if defined(CONFIG_OF) > +static unsigned int *at91_aic_irq_priorities; > + > static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, > irq_hw_number_t hw) > { > diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c > index dc474bc..fca9790 100644 > --- a/drivers/rtc/rtc-at91rm9200.c > +++ b/drivers/rtc/rtc-at91rm9200.c > @@ -27,6 +27,7 @@ > #include <linux/interrupt.h> > #include <linux/ioctl.h> > #include <linux/completion.h> > +#include <linux/io.h> > > #include <asm/uaccess.h> > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] at91: first batch of cleanup for 3.6 2012-07-04 7:42 ` Arnd Bergmann 2012-07-04 8:01 ` ludovic.desroches @ 2012-07-04 9:55 ` Nicolas Ferre 2012-07-04 11:10 ` Arnd Bergmann 1 sibling, 1 reply; 6+ messages in thread From: Nicolas Ferre @ 2012-07-04 9:55 UTC (permalink / raw) To: linux-arm-kernel On 07/04/2012 09:42 AM, Arnd Bergmann : > On Monday 02 July 2012, Arnd Bergmann wrote: >> On Monday 02 July 2012, Nicolas Ferre wrote: >>> The following changes since commit >>> 6887a4131da3adaab011613776d865f4bcfb5678: >>> >>> Linux 3.5-rc5 (2012-06-30 16:08:57 -0700) >>> >>> are available in the git repository at: >>> >>> git://github.com/at91linux/linux-at91.git tags/at91-for-next-cleanup >> >> Pulled into next/cleanup > > Unfortunately, I got a bunch of new builf errors and warnings: > > 8<---- > ARM: at91: fix new build errors > > MULTI_IRQ_HANDLER and SPARSE_IRQ are now required everywhere because > mach/irqs.h and mach/entry-macros.S are gone but the symbols are > only selected for AT91SAM9, not for the NOMMU parts. > > A few files now need to include linux/io.h directly, which used to > be included through other headers that have changed. > > The new at91_aic_irq_priorities variable is only used with CONFIG_OF > enabled and should not be visible otherwise. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > > Please check these patches for correctness, and try to be more careful > to avoid such problems in the future. I found these just building the > defconfig files, not even invoking my randconfig scripts. Sorry for this Arnd, I should have triggered my building scripts earlier for this request... Tell me if you can queue your fixing patch or if you prefer that I rework it and send it back a series to you... Anyway, here is my: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Thanks a lot. > diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > index 7d0c40a..c8050b1 100644 > --- a/arch/arm/mach-at91/Kconfig > +++ b/arch/arm/mach-at91/Kconfig > @@ -37,6 +37,8 @@ config SOC_AT91SAM9 > config SOC_AT91RM9200 > bool "AT91RM9200" > select CPU_ARM920T > + select MULTI_IRQ_HANDLER > + select SPARSE_IRQ > select GENERIC_CLOCKEVENTS > select HAVE_AT91_DBGU0 > > @@ -142,6 +144,8 @@ config ARCH_AT91SAM9G45 > config ARCH_AT91X40 > bool "AT91x40" > depends on !MMU > + select MULTI_IRQ_HANDLER > + select SPARSE_IRQ > select ARCH_USES_GETTIMEOFFSET > > endchoice > diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c > index 4c0f5fd..46090e6 100644 > --- a/arch/arm/mach-at91/at91x40.c > +++ b/arch/arm/mach-at91/at91x40.c > @@ -13,6 +13,7 @@ > #include <linux/kernel.h> > #include <linux/init.h> > #include <linux/irq.h> > +#include <linux/io.h> > #include <asm/proc-fns.h> > #include <asm/system_misc.h> > #include <asm/mach/arch.h> > diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c > index c5eaaa0..1e02c0e 100644 > --- a/arch/arm/mach-at91/irq.c > +++ b/arch/arm/mach-at91/irq.c > @@ -49,7 +49,6 @@ static struct irq_domain *at91_aic_domain; > static struct device_node *at91_aic_np; > static unsigned int n_irqs = NR_AIC_IRQS; > static unsigned long at91_aic_caps = 0; > -static unsigned int *at91_aic_irq_priorities; > > /* AIC5 introduces a Source Select Register */ > #define AT91_AIC_CAP_AIC5 (1 << 0) > @@ -359,6 +358,8 @@ static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) > } > > #if defined(CONFIG_OF) > +static unsigned int *at91_aic_irq_priorities; > + > static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, > irq_hw_number_t hw) > { > diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c > index dc474bc..fca9790 100644 > --- a/drivers/rtc/rtc-at91rm9200.c > +++ b/drivers/rtc/rtc-at91rm9200.c > @@ -27,6 +27,7 @@ > #include <linux/interrupt.h> > #include <linux/ioctl.h> > #include <linux/completion.h> > +#include <linux/io.h> > > #include <asm/uaccess.h> > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] at91: first batch of cleanup for 3.6 2012-07-04 9:55 ` Nicolas Ferre @ 2012-07-04 11:10 ` Arnd Bergmann 0 siblings, 0 replies; 6+ messages in thread From: Arnd Bergmann @ 2012-07-04 11:10 UTC (permalink / raw) To: linux-arm-kernel On Wednesday 04 July 2012, Nicolas Ferre wrote: > Sorry for this Arnd, I should have triggered my building scripts earlier > for this request... > > Tell me if you can queue your fixing patch or if you prefer that I > rework it and send it back a series to you... Your choice. I'll apply the fix now, but I can replace the series if you prefer to send a more bisectible version. > Anyway, here is my: > > Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > Thanks for the quick reply. Arnd ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-07-04 11:10 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-07-02 13:00 [GIT PULL] at91: first batch of cleanup for 3.6 Nicolas Ferre 2012-07-02 20:58 ` Arnd Bergmann 2012-07-04 7:42 ` Arnd Bergmann 2012-07-04 8:01 ` ludovic.desroches 2012-07-04 9:55 ` Nicolas Ferre 2012-07-04 11:10 ` Arnd Bergmann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).