[PATCH 0/7] arm/dts: Audio support for OMAP4 devices (SDP, PandaBoard)

[tony@atomide.com (Tony Lindgren)]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [120709 05:24]:
> Hello,
> 
> On 06/08/2012 04:01 PM, Peter Ujfalusi wrote:
> > Hello,
> > 
> > The following series enable the audio functionality on OMAP4 based devices using
> > twl6040 as audio codec.
> > 
> > The series adds the needed bindings in the dts for the OMAP IPs, twl6040 MFD
> > device and for the audio connection on the board.
> > 
> > To be able to differentiate between PandaBoard and PandaBoardES (they have a bit
> > different audio configuration) a new dts file has been created which only
> > changes the audio properties different between the two boards.
> > 
> > Patches for the drivers involved and the documentation related to dts sections
> > has been either in 3.5 or heading for 3.6.
> 
> Probably this series has been overlooked, since I have not received feedback
> on it.
> Should I resend the series? Which tree should I use to rebase it?

Hmm yeah looks good to me. I guess I was waiting for Benoit to apply or ack
them. I'll apply them into devel-dt branch.

Regards,

Tony
 
> Thank you,
> P?ter
> 
> > 
> > Regards,
> > Peter
> > ---
> > Peter Ujfalusi (7):
> >   arm/dts: omap4: Add entry for OMAP McPDM IP
> >   arm/dts: omap4: Add entry for OMAP DMIC IP
> >   arm/dts: omap4-sdp: Add fixed regulator to represent VBAT
> >   arm/dts: omap4-sdp: Add support for twl6040
> >   arm/dts: omap4-sdp: Enable audio support via device tree
> >   arm/dts: omap4-panda: Audio support for PandaBoard 4430
> >   arm/dts: New dts file for PandaBoardES (4460)
> > 
> >  arch/arm/boot/dts/omap4-panda.dts   |   37 +++++++++++++++++++
> >  arch/arm/boot/dts/omap4-pandaES.dts |   24 ++++++++++++
> >  arch/arm/boot/dts/omap4-sdp.dts     |   68 +++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/omap4.dtsi        |   18 +++++++++
> >  4 files changed, 147 insertions(+), 0 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/omap4-pandaES.dts
> > 
> 
>