From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC
Date: Mon, 9 Jul 2012 06:11:58 -0700 [thread overview]
Message-ID: <20120709131156.GH1122@atomide.com> (raw)
In-Reply-To: <4FFA9B61.8030808@ti.com>
* Vaibhav Hiremath <hvaibhav@ti.com> [120709 01:55]:
> On 7/6/2012 2:51 PM, Santosh Shilimkar wrote:
> > --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
> > +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
> > @@ -39,6 +39,7 @@ struct omap_clk {
> > #define CK_443X (1 << 11)
> > #define CK_TI816X (1 << 12)
> > #define CK_446X (1 << 13)
> > +#define CK_54XX (1 << 14)
>
> This is conflicting with AM33XX, you may want to rebase it again, since
> AM33xx clock tree is already pushed and available in
> linux-omap/devel-am33xx-part2.
Heh these CK_XXXX defines are now running out of the u16 cpu_mask.
They really should be replaced with SoC specific lists of clocks
rather than bloating the cpu_mask and repeating it for every clock
that's compiled in for 800+ times.
Below (untested) is what could be done in the short term.
I wonder if we could #define CK_OMAP_DUMMY 0 that's always set
for non-shared clocks if they only get set in some *_data.c
file in a unique way?
Paul got any better ideas?
Regards,
Tony
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -26,26 +26,29 @@ struct omap_clk {
}
/* Platform flags for the clkdev-OMAP integration code */
+
+#ifdef CONFIG_ARCH_OMAP1
#define CK_310 (1 << 0)
#define CK_7XX (1 << 1) /* 7xx, 850 */
#define CK_1510 (1 << 2)
#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
-#define CK_242X (1 << 4)
-#define CK_243X (1 << 5) /* 243x, 253x */
-#define CK_3430ES1 (1 << 6) /* 34xxES1 only */
-#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_AM35XX (1 << 9) /* Sitara AM35xx */
-#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
-#define CK_443X (1 << 11)
-#define CK_TI816X (1 << 12)
-#define CK_446X (1 << 13)
-#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */
-#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
-
+#define CK_1710 (1 << 4) /* 1710 extra for rate selection */
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define CK_242X (1 << 0)
+#define CK_243X (1 << 1) /* 243x, 253x */
+#define CK_3430ES1 (1 << 2) /* 34xxES1 only */
+#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_AM35XX (1 << 4) /* Sitara AM35xx */
+#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */
+#define CK_443X (1 << 6)
+#define CK_TI816X (1 << 7)
+#define CK_446X (1 << 8)
+#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */
#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
-
+#endif
#endif
next prev parent reply other threads:[~2012-07-09 13:11 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-06 9:21 [PATCH v2 00/14] ARM: OMAP5: Add minimal OMAP5 SOC support Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 01/14] ARM: OMAP2+: Move stubbed secure_sram_reserve function to a common.c and call it __weak Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 02/14] ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme Santosh Shilimkar
2012-07-09 8:50 ` Vaibhav Hiremath
2012-07-09 10:42 ` Shilimkar, Santosh
2012-07-10 6:41 ` Hiremath, Vaibhav
2012-07-10 7:12 ` Shilimkar, Santosh
2012-07-10 7:25 ` Hiremath, Vaibhav
2012-07-09 16:47 ` Kevin Hilman
2012-07-09 23:21 ` Jon Hunter
2012-07-10 5:50 ` Shilimkar, Santosh
2012-07-09 23:52 ` Jon Hunter
2012-07-06 9:21 ` [PATCH v2 03/14] ARM: OMAP5: id: Add cpu id for ES versions Santosh Shilimkar
2012-11-02 10:03 ` Roger Quadros
2012-11-06 18:18 ` Tony Lindgren
2012-07-06 9:21 ` [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC Santosh Shilimkar
2012-07-09 8:50 ` Vaibhav Hiremath
2012-07-09 10:39 ` Shilimkar, Santosh
2012-07-10 5:57 ` Hiremath, Vaibhav
2012-07-10 6:06 ` Shilimkar, Santosh
2012-07-10 6:11 ` Hiremath, Vaibhav
2012-07-09 13:11 ` Tony Lindgren [this message]
2012-07-09 13:25 ` Tony Lindgren
2012-07-09 13:26 ` Shilimkar, Santosh
2012-07-09 14:26 ` Shilimkar, Santosh
2012-07-10 6:25 ` Hiremath, Vaibhav
2012-07-10 8:18 ` Tony Lindgren
2012-07-10 8:30 ` Hiremath, Vaibhav
2012-07-10 8:37 ` Tony Lindgren
2012-08-15 22:26 ` Paul Walmsley
2012-08-16 8:39 ` Tony Lindgren
2012-08-16 9:36 ` Hiremath, Vaibhav
2012-07-06 9:21 ` [PATCH v2 05/14] ARM: OMAP5: timer: Add clocksource, clockevent support Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 06/14] ARM: OMAP5: gpmc: Update gpmc_init() Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 07/14] ARM: OMAP5: l3: Add l3 error handler support for omap5 Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 08/14] ARM: OMAP5: Add the WakeupGen IP updates Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 09/14] ARM: OMAP5: Add SMP support Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 10/14] ARM: omap2+: board-generic: clean up the irq data from board file Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 11/14] ARM: OMAP5: board-generic: Add device tree support Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 12/14] arm/dts: OMAP5: Add omap5 dts files Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 13/14] ARM: OMAP5: Add the build support Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 14/14] ARM: Kconfig update to support additional GPIOs in OMAP5 Santosh Shilimkar
2012-07-06 12:36 ` [PATCH v2 00/14] ARM: OMAP5: Add minimal OMAP5 SOC support Tony Lindgren
2012-07-06 12:47 ` Shilimkar, Santosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120709131156.GH1122@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).