From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@opensource.wolfsonmicro.com (Mark Brown) Date: Tue, 10 Jul 2012 18:01:13 +0100 Subject: [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators In-Reply-To: <4FFC5E1C.7000500@nvidia.com> References: <4FE8EFC4.3090509@wwwdotorg.org> <4FFC190A.2040800@nvidia.com> <20120710134436.GD9409@opensource.wolfsonmicro.com> <4FFC31D5.7090600@nvidia.com> <20120710135302.GG9409@opensource.wolfsonmicro.com> <4FFC4478.7000204@nvidia.com> <20120710154201.GE10022@opensource.wolfsonmicro.com> <4FFC5ACA.8010003@nvidia.com> <20120710165236.GI10022@opensource.wolfsonmicro.com> <4FFC5E1C.7000500@nvidia.com> Message-ID: <20120710170112.GK10022@opensource.wolfsonmicro.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Jul 10, 2012 at 10:23:48PM +0530, Laxman Dewangan wrote: > Then I will have 2 question: > 1. If that pin is connected to battery then what should be entry? > vcc1-supply = <>>>; > Do we need to register battery supply as fixed (non-gpio based) and > then refer here for phandle? Use a fixed voltage regulator to represent the battery. > 2. what about non-dt case? The regulator registration will also fail > here because of there is no regulator saying vcc1 in this case. Do > we need to register the vcc1 regualtor as fixed, battery supplied > regulator in board files so that the ldo's registration will > success? Same thing, use a fixed voltage regulator. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: