From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Tue, 24 Jul 2012 01:32:04 -0700 Subject: [PATCH v2 1/2] arm/dts: Add AM33XX basic pinctrl support In-Reply-To: <1342769508-24810-2-git-send-email-anilkumar@ti.com> References: <1342769508-24810-1-git-send-email-anilkumar@ti.com> <1342769508-24810-2-git-send-email-anilkumar@ti.com> Message-ID: <20120724083203.GV6522@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * AnilKumar Ch [120720 00:36]: > Add basic pinctrl support for AM33XX family of devices by adding DT > data to am33xx dtsi file. These patches are based on pinctrl-single > driver and tested on am335x-evm & am335x-bone devices. > > Signed-off-by: AnilKumar Ch > --- > arch/arm/boot/dts/am33xx.dtsi | 9 +++++++++ > 1 files changed, 9 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index 59509c4..9b974dc 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -40,6 +40,15 @@ > }; > }; > > + am3358_pinmux: pinmux at 44E10800 { > + compatible = "pinctrl-single"; > + reg = <0x44E10800 0x0338>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-single,register-width = <32>; > + pinctrl-single,function-mask = <0x7F>; > + }; > + > /* > * XXX: Use a flat representation of the AM33XX interconnect. > * The real AM33XX interconnect network is quite complex.Since Is there only one padconf domain on 33xx instead of separate core and wkup domains like omap3 and omap4 have? Regards, Tony