* [PATCH 1/2] ARM: mx23: Fix registers range
@ 2012-07-31 0:29 Fabio Estevam
2012-07-31 0:29 ` [PATCH 2/2] ARM: mx28: " Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Fabio Estevam @ 2012-07-31 0:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
Fix registers range.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx23.dtsi | 52 +++++++++++++++++++++---------------------
1 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index a874dbf..e613831 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -51,11 +51,11 @@
dma-apbh at 80004000 {
compatible = "fsl,imx23-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
ecc at 80008000 {
- reg = <0x80008000 2000>;
+ reg = <0x80008000 0x2000>;
status = "disabled";
};
@@ -63,7 +63,7 @@
compatible = "fsl,imx23-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
@@ -72,14 +72,14 @@
};
ssp0: ssp at 80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <15 14>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
etm at 80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
status = "disabled";
};
@@ -87,7 +87,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx23-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio at 0 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
@@ -273,32 +273,32 @@
};
emi at 80020000 {
- reg = <0x80020000 2000>;
+ reg = <0x80020000 0x2000>;
status = "disabled";
};
dma-apbx at 80024000 {
compatible = "fsl,imx23-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp at 80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
status = "disabled";
};
pxp at 8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
status = "disabled";
};
ocotp at 8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb at 8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
@@ -310,14 +310,14 @@
};
ssp1: ssp at 80034000 {
- reg = <0x80034000 2000>;
+ reg = <0x80034000 0x2000>;
interrupts = <2 20>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
tvenc at 80038000 {
- reg = <0x80038000 2000>;
+ reg = <0x80038000 0x2000>;
status = "disabled";
};
};
@@ -330,37 +330,37 @@
ranges;
clkctl at 80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif at 80042000 {
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
status = "disabled";
};
power at 80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif at 80046000 {
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
status = "disabled";
};
audio-out at 80048000 {
- reg = <0x80048000 2000>;
+ reg = <0x80048000 0x2000>;
status = "disabled";
};
audio-in at 8004c000 {
- reg = <0x8004c000 2000>;
+ reg = <0x8004c000 0x2000>;
status = "disabled";
};
lradc at 80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
@@ -370,26 +370,26 @@
};
i2c at 80058000 {
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
status = "disabled";
};
rtc at 8005c000 {
compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x8005c000 2000>;
+ reg = <0x8005c000 0x2000>;
interrupts = <22>;
};
pwm: pwm at 80064000 {
compatible = "fsl,imx23-pwm";
- reg = <0x80064000 2000>;
+ reg = <0x80064000 0x2000>;
#pwm-cells = <2>;
fsl,pwm-number = <5>;
status = "disabled";
};
timrot at 80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
@@ -429,7 +429,7 @@
ranges;
usbctrl at 80080000 {
- reg = <0x80080000 0x10000>;
+ reg = <0x80080000 0x40000>;
status = "disabled";
};
};
--
1.7.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 2/2] ARM: mx28: Fix registers range 2012-07-31 0:29 [PATCH 1/2] ARM: mx23: Fix registers range Fabio Estevam @ 2012-07-31 0:29 ` Fabio Estevam 2012-07-31 0:35 ` Marek Vasut 2012-07-31 0:35 ` [PATCH 1/2] ARM: mx23: " Marek Vasut 2012-07-31 0:53 ` Shawn Guo 2 siblings, 1 reply; 7+ messages in thread From: Fabio Estevam @ 2012-07-31 0:29 UTC (permalink / raw) To: linux-arm-kernel From: Fabio Estevam <fabio.estevam@freescale.com> Fix registers range. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- arch/arm/boot/dts/imx28.dtsi | 74 +++++++++++++++++++++--------------------- 1 files changed, 37 insertions(+), 37 deletions(-) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac..3fa6d19 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc at 80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh at 80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon at 80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp at 80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp at 80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp at 80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp at 80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio at 0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl at 8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm at 80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx at 80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp at 80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp at 8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp at 8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb at 8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif at 80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can at 80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can at 80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg at 8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel at 8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel at 8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel at 8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon at 8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet at 8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag at 8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl at 80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif at 80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power at 80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif at 80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc at 80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif at 80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc at 80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,7 +658,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; @@ -668,7 +668,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; @@ -676,14 +676,14 @@ pwm: pwm at 80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot at 80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; -- 1.7.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] ARM: mx28: Fix registers range 2012-07-31 0:29 ` [PATCH 2/2] ARM: mx28: " Fabio Estevam @ 2012-07-31 0:35 ` Marek Vasut 0 siblings, 0 replies; 7+ messages in thread From: Marek Vasut @ 2012-07-31 0:35 UTC (permalink / raw) To: linux-arm-kernel Dear Fabio Estevam, > From: Fabio Estevam <fabio.estevam@freescale.com> > > Fix registers range. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> [...] Best regards, Marek Vasut ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] ARM: mx23: Fix registers range 2012-07-31 0:29 [PATCH 1/2] ARM: mx23: Fix registers range Fabio Estevam 2012-07-31 0:29 ` [PATCH 2/2] ARM: mx28: " Fabio Estevam @ 2012-07-31 0:35 ` Marek Vasut 2012-07-31 0:53 ` Shawn Guo 2 siblings, 0 replies; 7+ messages in thread From: Marek Vasut @ 2012-07-31 0:35 UTC (permalink / raw) To: linux-arm-kernel Dear Fabio Estevam, > From: Fabio Estevam <fabio.estevam@freescale.com> > > Fix registers range. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> [...] Best regards, Marek Vasut ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] ARM: mx23: Fix registers range 2012-07-31 0:29 [PATCH 1/2] ARM: mx23: Fix registers range Fabio Estevam 2012-07-31 0:29 ` [PATCH 2/2] ARM: mx28: " Fabio Estevam 2012-07-31 0:35 ` [PATCH 1/2] ARM: mx23: " Marek Vasut @ 2012-07-31 0:53 ` Shawn Guo 2012-07-31 9:16 ` Marc Kleine-Budde 2 siblings, 1 reply; 7+ messages in thread From: Shawn Guo @ 2012-07-31 0:53 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jul 30, 2012 at 09:29:18PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <fabio.estevam@freescale.com> > > Fix registers range. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- Queued both for 3.6-rc, thanks. -- Regards, Shawn ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] ARM: mx23: Fix registers range 2012-07-31 0:53 ` Shawn Guo @ 2012-07-31 9:16 ` Marc Kleine-Budde 2012-07-31 9:20 ` Shawn Guo 0 siblings, 1 reply; 7+ messages in thread From: Marc Kleine-Budde @ 2012-07-31 9:16 UTC (permalink / raw) To: linux-arm-kernel On 07/31/2012 02:53 AM, Shawn Guo wrote: > On Mon, Jul 30, 2012 at 09:29:18PM -0300, Fabio Estevam wrote: >> From: Fabio Estevam <fabio.estevam@freescale.com> >> >> Fix registers range. >> >> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> >> --- > > Queued both for 3.6-rc, thanks. Can you put stable on Cc? Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 262 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120731/527f8957/attachment.sig> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] ARM: mx23: Fix registers range 2012-07-31 9:16 ` Marc Kleine-Budde @ 2012-07-31 9:20 ` Shawn Guo 0 siblings, 0 replies; 7+ messages in thread From: Shawn Guo @ 2012-07-31 9:20 UTC (permalink / raw) To: linux-arm-kernel On 31 July 2012 17:16, Marc Kleine-Budde <mkl@pengutronix.de> wrote: > Can you put stable on Cc? > Though it's not causing any problem right now, copying stable is still a good idea. Yes, will do. Thanks, Shawn ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-07-31 9:20 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-07-31 0:29 [PATCH 1/2] ARM: mx23: Fix registers range Fabio Estevam 2012-07-31 0:29 ` [PATCH 2/2] ARM: mx28: " Fabio Estevam 2012-07-31 0:35 ` Marek Vasut 2012-07-31 0:35 ` [PATCH 1/2] ARM: mx23: " Marek Vasut 2012-07-31 0:53 ` Shawn Guo 2012-07-31 9:16 ` Marc Kleine-Budde 2012-07-31 9:20 ` Shawn Guo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).