From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/6] ARM: dove: add clock gating control
Date: Sun, 12 Aug 2012 17:22:07 +0200 [thread overview]
Message-ID: <20120812152207.GA6340@lunn.ch> (raw)
In-Reply-To: <1344681326-17946-3-git-send-email-sebastian.hesselbarth@gmail.com>
On Sat, Aug 11, 2012 at 12:35:22PM +0200, Sebastian Hesselbarth wrote:
> This patch adds clock gates from the clock gating control register
> available on dove. All clock gates are hooked up to tclk, except for
> gigabit ethernet controller (ge) which is a child of gephy to allow
> both enabled/disabled at the same time.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> ---
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-kernel at vger.kernel.org
> Cc: Rabeeh Khoury <rabeeh@solid-run.com>
> Cc: Ian Molton <ian.molton@codethink.co.uk>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Maen Suleiman <maen@marvell.com>
> Cc: Olof Johansson <olof@lixom.net>
>
> v2: adapted to removed clk_prepare_enable from patch 1
> ---
> arch/arm/mach-dove/common.c | 59 +++++++++++++++++++++++++++++++++-
> arch/arm/mach-dove/include/mach/pm.h | 54 ++++++++++++++++++++-----------
> 2 files changed, 94 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
> index b6f092c..7281591 100644
> --- a/arch/arm/mach-dove/common.c
> +++ b/arch/arm/mach-dove/common.c
> @@ -16,6 +16,7 @@
> #include <linux/clk-provider.h>
> #include <linux/ata_platform.h>
> #include <linux/gpio.h>
> +#include <linux/mv643xx_i2c.h>
> #include <asm/page.h>
> #include <asm/setup.h>
> #include <asm/timex.h>
> @@ -24,6 +25,7 @@
> #include <asm/mach/time.h>
> #include <asm/mach/pci.h>
> #include <mach/dove.h>
> +#include <mach/pm.h>
> #include <mach/bridge-regs.h>
> #include <asm/mach/arch.h>
> #include <linux/irq.h>
> @@ -31,6 +33,7 @@
> #include <plat/ehci-orion.h>
> #include <plat/common.h>
> #include <plat/addr-map.h>
> +#include <plat/mv_xor.h>
> #include "common.h"
>
> /*****************************************************************************
> @@ -69,14 +72,68 @@ void __init dove_map_io(void)
> * CLK tree
> ****************************************************************************/
> static int dove_tclk;
> +
> +static DEFINE_SPINLOCK(gating_lock);
> static struct clk *tclk;
>
> +static struct clk __init *dove_register_gate(const char *name,
> + const char *parent, u8 bit_idx)
> +{
> + return clk_register_gate(NULL, name, parent, 0,
> + (void __iomem *)CLOCK_GATING_CONTROL,
> + bit_idx, 0, &gating_lock);
> +}
> +
> static void __init dove_clk_init(void)
> {
> + struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
> + struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
> + struct clk *xor0, *xor1, *ge, *gephy;
> +
> tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
> dove_tclk);
>
> - orion_clkdev_init(tclk);
> + usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
> + usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);
> + sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA);
> + pex0 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE0);
> + pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1);
> + sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0);
> + sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1);
> + nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND);
> + camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA);
> + i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0);
> + i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1);
> + crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO);
> + ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97);
> + pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
> + xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
> + xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
> + gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
> + ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
> +
> + orion_clkdev_add(NULL, "orion_spi.0", tclk);
> + orion_clkdev_add(NULL, "orion_spi.1", tclk);
> + orion_clkdev_add(NULL, "orion_wdt", tclk);
> + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", tclk);
> +
> + orion_clkdev_add(NULL, "orion-ehci.0", usb0);
> + orion_clkdev_add(NULL, "orion-ehci.1", usb1);
> + orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge);
Hi Sebastian
Take a look at the patch [PATCH v3 7/7] NET: mv643xx: remove device
name macro, from Ian Molten, and the discussion around the macro
MV643XX_ETH_NAME and its friend.
It is probably best to not use the I2C and XOR macro as well.
Andrew
next prev parent reply other threads:[~2012-08-12 15:22 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-06 12:23 [PATCH 0/6] ARM: dove: DT support for Marvell Dove Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth
2012-08-11 9:12 ` Andrew Lunn
2012-08-11 9:38 ` Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth
2012-08-06 14:02 ` [PATCH 0/6] ARM: dove: DT support for Marvell Dove Arnd Bergmann
2012-08-06 14:16 ` Sebastian Hesselbarth
2012-08-06 14:23 ` Arnd Bergmann
2012-08-07 16:53 ` Russell King - ARM Linux
2012-08-07 19:32 ` Sebastian Hesselbarth
2012-08-11 10:35 ` [PATCH v2 " Sebastian Hesselbarth
2012-08-11 10:35 ` [PATCH v2 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth
2012-08-11 10:35 ` [PATCH v2 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth
2012-08-12 15:22 ` Andrew Lunn [this message]
2012-08-11 10:35 ` [PATCH v2 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth
2012-08-11 10:35 ` [PATCH v2 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth
2012-08-11 10:35 ` [PATCH v2 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth
2012-08-11 10:35 ` [PATCH v2 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth
2012-08-15 17:07 ` [PATCH v3 0/6] ARM: dove: DT support for Marvell Dove Sebastian Hesselbarth
2012-08-15 17:07 ` [PATCH v3 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth
2012-08-15 17:07 ` [PATCH v3 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth
2012-08-15 17:07 ` [PATCH v3 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth
2012-08-15 17:07 ` [PATCH v3 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth
2012-08-15 17:07 ` [PATCH v3 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth
2012-08-15 17:07 ` [PATCH v3 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth
2012-09-10 2:41 ` [PATCH v3 0/6] ARM: dove: DT support for Marvell Dove Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120812152207.GA6340@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).