[PATCH 00/10 V3] MXS SPI driver

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 00/10 V3] MXS SPI driver
@ 2012-08-03 15:26 Marek Vasut
  2012-08-03 15:26 ` [PATCH 01/10] mmc: spi: Move SSP register definitions into separate file Marek Vasut
                   ` (11 more replies)
  0 siblings, 12 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

This patchset adds SPI master support for Freescale i.MX233/i.MX28.
This is rebased on top of next-20120713. Please consider applying,
bugs shall now be squashed during the previous two review rounds.

Marek Vasut (10):
  mmc: spi: Move SSP register definitions into separate file
  mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP
  mmc: spi: Add necessary bits into mxs-spi.h
  mmc: spi: Pull out parts shared between MMC and SPI
  mmc: spi: Pull out the SSP clock configuration function
  spi: Add SPI driver for mx233/mx28
  mmc: spi: Pull out common DMA parts from MXS MMC
  spi: Add DMA support into SPI driver
  spi: Add SSP/SPI device tree documentation
  ARM: mx28: Add SPI pinmux into imx28.dtsi

 Documentation/devicetree/bindings/spi/mxs-spi.txt |   18 +
 arch/arm/boot/dts/imx28.dtsi                      |   39 ++
 drivers/clk/mxs/Makefile                          |    2 +-
 drivers/clk/mxs/clk-ssp.c                         |   62 ++
 drivers/mmc/host/mxs-mmc.c                        |  325 ++++-------
 drivers/spi/Kconfig                               |    7 +
 drivers/spi/Makefile                              |    1 +
 drivers/spi/spi-mxs.c                             |  631 +++++++++++++++++++++
 include/linux/spi/mxs-spi.h                       |  150 +++++
 9 files changed, 1016 insertions(+), 219 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
 create mode 100644 drivers/clk/mxs/clk-ssp.c
 create mode 100644 drivers/spi/spi-mxs.c
 create mode 100644 include/linux/spi/mxs-spi.h

Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
-- 
1.7.10.4

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 01/10] mmc: spi: Move SSP register definitions into separate file
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 02/10] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP Marek Vasut
                   ` (10 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

Move the definitions into separate file so separate SPI driver can be
implemented. The SSP controller in MXS can act both as a MMC host and
as a SPI host.

Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/mmc/host/mxs-mmc.c  |   87 ++--------------------------------
 include/linux/spi/mxs-spi.h |  109 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 112 insertions(+), 84 deletions(-)
 create mode 100644 include/linux/spi/mxs-spi.h

diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index a51f930..26c95dc 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -45,87 +45,10 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/stmp_device.h>
 #include <linux/mmc/mxs-mmc.h>
+#include <linux/spi/mxs-spi.h>
 
 #define DRIVER_NAME	"mxs-mmc"
 
-/* card detect polling timeout */
-#define MXS_MMC_DETECT_TIMEOUT			(HZ/2)
-
-#define ssp_is_old(host)	((host)->devid == IMX23_MMC)
-
-/* SSP registers */
-#define HW_SSP_CTRL0				0x000
-#define  BM_SSP_CTRL0_RUN			(1 << 29)
-#define  BM_SSP_CTRL0_SDIO_IRQ_CHECK		(1 << 28)
-#define  BM_SSP_CTRL0_IGNORE_CRC		(1 << 26)
-#define  BM_SSP_CTRL0_READ			(1 << 25)
-#define  BM_SSP_CTRL0_DATA_XFER			(1 << 24)
-#define  BP_SSP_CTRL0_BUS_WIDTH			(22)
-#define  BM_SSP_CTRL0_BUS_WIDTH			(0x3 << 22)
-#define  BM_SSP_CTRL0_WAIT_FOR_IRQ		(1 << 21)
-#define  BM_SSP_CTRL0_LONG_RESP			(1 << 19)
-#define  BM_SSP_CTRL0_GET_RESP			(1 << 17)
-#define  BM_SSP_CTRL0_ENABLE			(1 << 16)
-#define  BP_SSP_CTRL0_XFER_COUNT		(0)
-#define  BM_SSP_CTRL0_XFER_COUNT		(0xffff)
-#define HW_SSP_CMD0				0x010
-#define  BM_SSP_CMD0_DBL_DATA_RATE_EN		(1 << 25)
-#define  BM_SSP_CMD0_SLOW_CLKING_EN		(1 << 22)
-#define  BM_SSP_CMD0_CONT_CLKING_EN		(1 << 21)
-#define  BM_SSP_CMD0_APPEND_8CYC		(1 << 20)
-#define  BP_SSP_CMD0_BLOCK_SIZE			(16)
-#define  BM_SSP_CMD0_BLOCK_SIZE			(0xf << 16)
-#define  BP_SSP_CMD0_BLOCK_COUNT		(8)
-#define  BM_SSP_CMD0_BLOCK_COUNT		(0xff << 8)
-#define  BP_SSP_CMD0_CMD			(0)
-#define  BM_SSP_CMD0_CMD			(0xff)
-#define HW_SSP_CMD1				0x020
-#define HW_SSP_XFER_SIZE			0x030
-#define HW_SSP_BLOCK_SIZE			0x040
-#define  BP_SSP_BLOCK_SIZE_BLOCK_COUNT		(4)
-#define  BM_SSP_BLOCK_SIZE_BLOCK_COUNT		(0xffffff << 4)
-#define  BP_SSP_BLOCK_SIZE_BLOCK_SIZE		(0)
-#define  BM_SSP_BLOCK_SIZE_BLOCK_SIZE		(0xf)
-#define HW_SSP_TIMING(h)			(ssp_is_old(h) ? 0x050 : 0x070)
-#define  BP_SSP_TIMING_TIMEOUT			(16)
-#define  BM_SSP_TIMING_TIMEOUT			(0xffff << 16)
-#define  BP_SSP_TIMING_CLOCK_DIVIDE		(8)
-#define  BM_SSP_TIMING_CLOCK_DIVIDE		(0xff << 8)
-#define  BP_SSP_TIMING_CLOCK_RATE		(0)
-#define  BM_SSP_TIMING_CLOCK_RATE		(0xff)
-#define HW_SSP_CTRL1(h)				(ssp_is_old(h) ? 0x060 : 0x080)
-#define  BM_SSP_CTRL1_SDIO_IRQ			(1 << 31)
-#define  BM_SSP_CTRL1_SDIO_IRQ_EN		(1 << 30)
-#define  BM_SSP_CTRL1_RESP_ERR_IRQ		(1 << 29)
-#define  BM_SSP_CTRL1_RESP_ERR_IRQ_EN		(1 << 28)
-#define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ		(1 << 27)
-#define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	(1 << 26)
-#define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ		(1 << 25)
-#define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	(1 << 24)
-#define  BM_SSP_CTRL1_DATA_CRC_IRQ		(1 << 23)
-#define  BM_SSP_CTRL1_DATA_CRC_IRQ_EN		(1 << 22)
-#define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ		(1 << 21)
-#define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN	(1 << 20)
-#define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ		(1 << 17)
-#define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	(1 << 16)
-#define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ		(1 << 15)
-#define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN	(1 << 14)
-#define  BM_SSP_CTRL1_DMA_ENABLE		(1 << 13)
-#define  BM_SSP_CTRL1_POLARITY			(1 << 9)
-#define  BP_SSP_CTRL1_WORD_LENGTH		(4)
-#define  BM_SSP_CTRL1_WORD_LENGTH		(0xf << 4)
-#define  BP_SSP_CTRL1_SSP_MODE			(0)
-#define  BM_SSP_CTRL1_SSP_MODE			(0xf)
-#define HW_SSP_SDRESP0(h)			(ssp_is_old(h) ? 0x080 : 0x0a0)
-#define HW_SSP_SDRESP1(h)			(ssp_is_old(h) ? 0x090 : 0x0b0)
-#define HW_SSP_SDRESP2(h)			(ssp_is_old(h) ? 0x0a0 : 0x0c0)
-#define HW_SSP_SDRESP3(h)			(ssp_is_old(h) ? 0x0b0 : 0x0d0)
-#define HW_SSP_STATUS(h)			(ssp_is_old(h) ? 0x0c0 : 0x100)
-#define  BM_SSP_STATUS_CARD_DETECT		(1 << 28)
-#define  BM_SSP_STATUS_SDIO_IRQ			(1 << 17)
-
-#define BF_SSP(value, field)	(((value) << BP_SSP_##field) & BM_SSP_##field)
-
 #define MXS_MMC_IRQ_BITS	(BM_SSP_CTRL1_SDIO_IRQ		| \
 				 BM_SSP_CTRL1_RESP_ERR_IRQ	| \
 				 BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	| \
@@ -135,12 +58,8 @@
 				 BM_SSP_CTRL1_RECV_TIMEOUT_IRQ  | \
 				 BM_SSP_CTRL1_FIFO_OVERRUN_IRQ)
 
-#define SSP_PIO_NUM	3
-
-enum mxs_mmc_id {
-	IMX23_MMC,
-	IMX28_MMC,
-};
+/* card detect polling timeout */
+#define MXS_MMC_DETECT_TIMEOUT			(HZ/2)
 
 struct mxs_mmc_host {
 	struct mmc_host			*mmc;
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
new file mode 100644
index 0000000..b7ccd57
--- /dev/null
+++ b/include/linux/spi/mxs-spi.h
@@ -0,0 +1,109 @@
+/*
+ * include/linux/spi/mxs-spi.h
+ *
+ * Freescale i.MX233/i.MX28 SPI controller register definition
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __LINUX_SPI_MXS_SPI_H__
+#define __LINUX_SPI_MXS_SPI_H__
+
+#define ssp_is_old(host)	((host)->devid == IMX23_MMC)
+
+/* SSP registers */
+#define HW_SSP_CTRL0				0x000
+#define  BM_SSP_CTRL0_RUN			(1 << 29)
+#define  BM_SSP_CTRL0_SDIO_IRQ_CHECK		(1 << 28)
+#define  BM_SSP_CTRL0_IGNORE_CRC		(1 << 26)
+#define  BM_SSP_CTRL0_READ			(1 << 25)
+#define  BM_SSP_CTRL0_DATA_XFER			(1 << 24)
+#define  BP_SSP_CTRL0_BUS_WIDTH			22
+#define  BM_SSP_CTRL0_BUS_WIDTH			(0x3 << 22)
+#define  BM_SSP_CTRL0_WAIT_FOR_IRQ		(1 << 21)
+#define  BM_SSP_CTRL0_LONG_RESP			(1 << 19)
+#define  BM_SSP_CTRL0_GET_RESP			(1 << 17)
+#define  BM_SSP_CTRL0_ENABLE			(1 << 16)
+#define  BP_SSP_CTRL0_XFER_COUNT		0
+#define  BM_SSP_CTRL0_XFER_COUNT		0xffff
+#define HW_SSP_CMD0				0x010
+#define  BM_SSP_CMD0_DBL_DATA_RATE_EN		(1 << 25)
+#define  BM_SSP_CMD0_SLOW_CLKING_EN		(1 << 22)
+#define  BM_SSP_CMD0_CONT_CLKING_EN		(1 << 21)
+#define  BM_SSP_CMD0_APPEND_8CYC		(1 << 20)
+#define  BP_SSP_CMD0_BLOCK_SIZE			16
+#define  BM_SSP_CMD0_BLOCK_SIZE			(0xf << 16)
+#define  BP_SSP_CMD0_BLOCK_COUNT		8
+#define  BM_SSP_CMD0_BLOCK_COUNT		(0xff << 8)
+#define  BP_SSP_CMD0_CMD			0
+#define  BM_SSP_CMD0_CMD			0xff
+#define HW_SSP_CMD1				0x020
+#define HW_SSP_XFER_SIZE			0x030
+#define HW_SSP_BLOCK_SIZE			0x040
+#define  BP_SSP_BLOCK_SIZE_BLOCK_COUNT		4
+#define  BM_SSP_BLOCK_SIZE_BLOCK_COUNT		(0xffffff << 4)
+#define  BP_SSP_BLOCK_SIZE_BLOCK_SIZE		0
+#define  BM_SSP_BLOCK_SIZE_BLOCK_SIZE		0xf
+#define HW_SSP_TIMING(h)			(ssp_is_old(h) ? 0x050 : 0x070)
+#define  BP_SSP_TIMING_TIMEOUT			16
+#define  BM_SSP_TIMING_TIMEOUT			(0xffff << 16)
+#define  BP_SSP_TIMING_CLOCK_DIVIDE		8
+#define  BM_SSP_TIMING_CLOCK_DIVIDE		(0xff << 8)
+#define  BP_SSP_TIMING_CLOCK_RATE		0
+#define  BM_SSP_TIMING_CLOCK_RATE		0xff
+#define HW_SSP_CTRL1(h)				(ssp_is_old(h) ? 0x060 : 0x080)
+#define  BM_SSP_CTRL1_SDIO_IRQ			(1 << 31)
+#define  BM_SSP_CTRL1_SDIO_IRQ_EN		(1 << 30)
+#define  BM_SSP_CTRL1_RESP_ERR_IRQ		(1 << 29)
+#define  BM_SSP_CTRL1_RESP_ERR_IRQ_EN		(1 << 28)
+#define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ		(1 << 27)
+#define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	(1 << 26)
+#define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ		(1 << 25)
+#define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	(1 << 24)
+#define  BM_SSP_CTRL1_DATA_CRC_IRQ		(1 << 23)
+#define  BM_SSP_CTRL1_DATA_CRC_IRQ_EN		(1 << 22)
+#define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ		(1 << 21)
+#define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN	(1 << 20)
+#define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ		(1 << 17)
+#define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	(1 << 16)
+#define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ		(1 << 15)
+#define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN	(1 << 14)
+#define  BM_SSP_CTRL1_DMA_ENABLE		(1 << 13)
+#define  BM_SSP_CTRL1_POLARITY			(1 << 9)
+#define  BP_SSP_CTRL1_WORD_LENGTH		4
+#define  BM_SSP_CTRL1_WORD_LENGTH		(0xf << 4)
+#define  BP_SSP_CTRL1_SSP_MODE			0
+#define  BM_SSP_CTRL1_SSP_MODE			0xf
+#define HW_SSP_SDRESP0(h)			(ssp_is_old(h) ? 0x080 : 0x0a0)
+#define HW_SSP_SDRESP1(h)			(ssp_is_old(h) ? 0x090 : 0x0b0)
+#define HW_SSP_SDRESP2(h)			(ssp_is_old(h) ? 0x0a0 : 0x0c0)
+#define HW_SSP_SDRESP3(h)			(ssp_is_old(h) ? 0x0b0 : 0x0d0)
+#define HW_SSP_STATUS(h)			(ssp_is_old(h) ? 0x0c0 : 0x100)
+#define  BM_SSP_STATUS_CARD_DETECT		(1 << 28)
+#define  BM_SSP_STATUS_SDIO_IRQ			(1 << 17)
+
+#define BF_SSP(value, field)	(((value) << BP_SSP_##field) & BM_SSP_##field)
+
+#define SSP_PIO_NUM	3
+
+enum mxs_mmc_id {
+	IMX23_MMC,
+	IMX28_MMC,
+};
+
+#endif	/* __LINUX_SPI_MXS_SPI_H__ */
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 02/10] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
  2012-08-03 15:26 ` [PATCH 01/10] mmc: spi: Move SSP register definitions into separate file Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 03/10] mmc: spi: Add necessary bits into mxs-spi.h Marek Vasut
                   ` (9 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

Since the SSP controller can act as both SPI and MMC host,
renaming the enum to properly reflect the naming seems
appropriate.

Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/mmc/host/mxs-mmc.c  |   18 +++++++++---------
 include/linux/spi/mxs-spi.h |    8 ++++----
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 26c95dc..e80c2b6 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -78,7 +78,7 @@ struct mxs_mmc_host {
 	enum dma_transfer_direction	slave_dirn;
 	u32				ssp_pio_words[SSP_PIO_NUM];
 
-	enum mxs_mmc_id			devid;
+	enum mxs_ssp_id			devid;
 	unsigned char			bus_width;
 	spinlock_t			lock;
 	int				sdio_irq_en;
@@ -601,22 +601,22 @@ static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
 	return true;
 }
 
-static struct platform_device_id mxs_mmc_ids[] = {
+static struct platform_device_id mxs_ssp_ids[] = {
 	{
 		.name = "imx23-mmc",
-		.driver_data = IMX23_MMC,
+		.driver_data = IMX23_SSP,
 	}, {
 		.name = "imx28-mmc",
-		.driver_data = IMX28_MMC,
+		.driver_data = IMX28_SSP,
 	}, {
 		/* sentinel */
 	}
 };
-MODULE_DEVICE_TABLE(platform, mxs_mmc_ids);
+MODULE_DEVICE_TABLE(platform, mxs_ssp_ids);
 
 static const struct of_device_id mxs_mmc_dt_ids[] = {
-	{ .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_MMC, },
-	{ .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_MMC, },
+	{ .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_SSP, },
+	{ .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_SSP, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
@@ -655,7 +655,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	}
 
 	if (np) {
-		host->devid = (enum mxs_mmc_id) of_id->data;
+		host->devid = (enum mxs_ssp_id) of_id->data;
 		/*
 		 * TODO: This is a temporary solution and should be changed
 		 * to use generic DMA binding later when the helpers get in.
@@ -829,7 +829,7 @@ static const struct dev_pm_ops mxs_mmc_pm_ops = {
 static struct platform_driver mxs_mmc_driver = {
 	.probe		= mxs_mmc_probe,
 	.remove		= mxs_mmc_remove,
-	.id_table	= mxs_mmc_ids,
+	.id_table	= mxs_ssp_ids,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index b7ccd57..c08aef5 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -24,7 +24,7 @@
 #ifndef __LINUX_SPI_MXS_SPI_H__
 #define __LINUX_SPI_MXS_SPI_H__
 
-#define ssp_is_old(host)	((host)->devid == IMX23_MMC)
+#define ssp_is_old(host)	((host)->devid == IMX23_SSP)
 
 /* SSP registers */
 #define HW_SSP_CTRL0				0x000
@@ -101,9 +101,9 @@
 
 #define SSP_PIO_NUM	3
 
-enum mxs_mmc_id {
-	IMX23_MMC,
-	IMX28_MMC,
+enum mxs_ssp_id {
+	IMX23_SSP,
+	IMX28_SSP,
 };
 
 #endif	/* __LINUX_SPI_MXS_SPI_H__ */
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 03/10] mmc: spi: Add necessary bits into mxs-spi.h
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
  2012-08-03 15:26 ` [PATCH 01/10] mmc: spi: Move SSP register definitions into separate file Marek Vasut
  2012-08-03 15:26 ` [PATCH 02/10] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 04/10] mmc: spi: Pull out parts shared between MMC and SPI Marek Vasut
                   ` (8 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

Add missing register bits and registers into mxs-spi.h .
These will be used by the SPI driver.

Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 include/linux/spi/mxs-spi.h |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index c08aef5..7dfa1d7 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -30,12 +30,14 @@
 #define HW_SSP_CTRL0				0x000
 #define  BM_SSP_CTRL0_RUN			(1 << 29)
 #define  BM_SSP_CTRL0_SDIO_IRQ_CHECK		(1 << 28)
+#define  BM_SSP_CTRL0_LOCK_CS			(1 << 27)
 #define  BM_SSP_CTRL0_IGNORE_CRC		(1 << 26)
 #define  BM_SSP_CTRL0_READ			(1 << 25)
 #define  BM_SSP_CTRL0_DATA_XFER			(1 << 24)
 #define  BP_SSP_CTRL0_BUS_WIDTH			22
 #define  BM_SSP_CTRL0_BUS_WIDTH			(0x3 << 22)
 #define  BM_SSP_CTRL0_WAIT_FOR_IRQ		(1 << 21)
+#define  BM_SSP_CTRL0_WAIT_FOR_CMD		(1 << 20)
 #define  BM_SSP_CTRL0_LONG_RESP			(1 << 19)
 #define  BM_SSP_CTRL0_GET_RESP			(1 << 17)
 #define  BM_SSP_CTRL0_ENABLE			(1 << 16)
@@ -64,8 +66,12 @@
 #define  BM_SSP_TIMING_TIMEOUT			(0xffff << 16)
 #define  BP_SSP_TIMING_CLOCK_DIVIDE		8
 #define  BM_SSP_TIMING_CLOCK_DIVIDE		(0xff << 8)
+#define  BF_SSP_TIMING_CLOCK_DIVIDE(v)		\
+			(((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
 #define  BP_SSP_TIMING_CLOCK_RATE		0
 #define  BM_SSP_TIMING_CLOCK_RATE		0xff
+#define BF_SSP_TIMING_CLOCK_RATE(v)		\
+			(((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
 #define HW_SSP_CTRL1(h)				(ssp_is_old(h) ? 0x060 : 0x080)
 #define  BM_SSP_CTRL1_SDIO_IRQ			(1 << 31)
 #define  BM_SSP_CTRL1_SDIO_IRQ_EN		(1 << 30)
@@ -84,11 +90,26 @@
 #define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ		(1 << 15)
 #define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN	(1 << 14)
 #define  BM_SSP_CTRL1_DMA_ENABLE		(1 << 13)
+#define  BM_SSP_CTRL1_PHASE			(1 << 10)
 #define  BM_SSP_CTRL1_POLARITY			(1 << 9)
 #define  BP_SSP_CTRL1_WORD_LENGTH		4
 #define  BM_SSP_CTRL1_WORD_LENGTH		(0xf << 4)
+#define  BF_SSP_CTRL1_WORD_LENGTH(v)		\
+			(((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
+#define  BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS	0x3
+#define  BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS	0x7
+#define  BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS	0xF
 #define  BP_SSP_CTRL1_SSP_MODE			0
 #define  BM_SSP_CTRL1_SSP_MODE			0xf
+#define  BF_SSP_CTRL1_SSP_MODE(v)		\
+			(((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
+#define  BV_SSP_CTRL1_SSP_MODE__SPI		0x0
+#define  BV_SSP_CTRL1_SSP_MODE__SSI		0x1
+#define  BV_SSP_CTRL1_SSP_MODE__SD_MMC		0x3
+#define  BV_SSP_CTRL1_SSP_MODE__MS		0x4
+
+#define HW_SSP_DATA(h)				(ssp_is_old(h) ? 0x070 : 0x090)
+
 #define HW_SSP_SDRESP0(h)			(ssp_is_old(h) ? 0x080 : 0x0a0)
 #define HW_SSP_SDRESP1(h)			(ssp_is_old(h) ? 0x090 : 0x0b0)
 #define HW_SSP_SDRESP2(h)			(ssp_is_old(h) ? 0x0a0 : 0x0c0)
@@ -96,6 +117,7 @@
 #define HW_SSP_STATUS(h)			(ssp_is_old(h) ? 0x0c0 : 0x100)
 #define  BM_SSP_STATUS_CARD_DETECT		(1 << 28)
 #define  BM_SSP_STATUS_SDIO_IRQ			(1 << 17)
+#define  BM_SSP_STATUS_FIFO_EMPTY		(1 << 5)
 
 #define BF_SSP(value, field)	(((value) << BP_SSP_##field) & BM_SSP_##field)
 
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 04/10] mmc: spi: Pull out parts shared between MMC and SPI
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (2 preceding siblings ...)
  2012-08-03 15:26 ` [PATCH 03/10] mmc: spi: Add necessary bits into mxs-spi.h Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 05/10] mmc: spi: Pull out the SSP clock configuration function Marek Vasut
                   ` (7 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

Abstract out the common part of private data shared between MMC
and SPI. These shall later allow to use common clock configuration
function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/mmc/host/mxs-mmc.c  |  107 ++++++++++++++++++++++++-------------------
 include/linux/spi/mxs-spi.h |    8 ++++
 2 files changed, 67 insertions(+), 48 deletions(-)

diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index e80c2b6..7b85e03 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -62,23 +62,20 @@
 #define MXS_MMC_DETECT_TIMEOUT			(HZ/2)
 
 struct mxs_mmc_host {
+	struct mxs_ssp			ssp;
+
 	struct mmc_host			*mmc;
 	struct mmc_request		*mrq;
 	struct mmc_command		*cmd;
 	struct mmc_data			*data;
 
-	void __iomem			*base;
 	int				dma_channel;
-	struct clk			*clk;
-	unsigned int			clk_rate;
-
 	struct dma_chan         	*dmach;
 	struct mxs_dma_data		dma_data;
 	unsigned int			dma_dir;
 	enum dma_transfer_direction	slave_dirn;
 	u32				ssp_pio_words[SSP_PIO_NUM];
 
-	enum mxs_ssp_id			devid;
 	unsigned char			bus_width;
 	spinlock_t			lock;
 	int				sdio_irq_en;
@@ -105,16 +102,18 @@ static int mxs_mmc_get_ro(struct mmc_host *mmc)
 static int mxs_mmc_get_cd(struct mmc_host *mmc)
 {
 	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
 
-	return !(readl(host->base + HW_SSP_STATUS(host)) &
+	return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
 		 BM_SSP_STATUS_CARD_DETECT);
 }
 
 static void mxs_mmc_reset(struct mxs_mmc_host *host)
 {
+	struct mxs_ssp *ssp = &host->ssp;
 	u32 ctrl0, ctrl1;
 
-	stmp_reset_block(host->base);
+	stmp_reset_block(ssp->base);
 
 	ctrl0 = BM_SSP_CTRL0_IGNORE_CRC;
 	ctrl1 = BF_SSP(0x3, CTRL1_SSP_MODE) |
@@ -130,15 +129,15 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
 	writel(BF_SSP(0xffff, TIMING_TIMEOUT) |
 	       BF_SSP(2, TIMING_CLOCK_DIVIDE) |
 	       BF_SSP(0, TIMING_CLOCK_RATE),
-	       host->base + HW_SSP_TIMING(host));
+	       ssp->base + HW_SSP_TIMING(ssp));
 
 	if (host->sdio_irq_en) {
 		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
 		ctrl1 |= BM_SSP_CTRL1_SDIO_IRQ_EN;
 	}
 
-	writel(ctrl0, host->base + HW_SSP_CTRL0);
-	writel(ctrl1, host->base + HW_SSP_CTRL1(host));
+	writel(ctrl0, ssp->base + HW_SSP_CTRL0);
+	writel(ctrl1, ssp->base + HW_SSP_CTRL1(ssp));
 }
 
 static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
@@ -149,15 +148,16 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host)
 	struct mmc_command *cmd = host->cmd;
 	struct mmc_data *data = host->data;
 	struct mmc_request *mrq = host->mrq;
+	struct mxs_ssp *ssp = &host->ssp;
 
 	if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
 		if (mmc_resp_type(cmd) & MMC_RSP_136) {
-			cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0(host));
-			cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1(host));
-			cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2(host));
-			cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3(host));
+			cmd->resp[3] = readl(ssp->base + HW_SSP_SDRESP0(ssp));
+			cmd->resp[2] = readl(ssp->base + HW_SSP_SDRESP1(ssp));
+			cmd->resp[1] = readl(ssp->base + HW_SSP_SDRESP2(ssp));
+			cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP3(ssp));
 		} else {
-			cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0(host));
+			cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP0(ssp));
 		}
 	}
 
@@ -196,13 +196,14 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
 	struct mxs_mmc_host *host = dev_id;
 	struct mmc_command *cmd = host->cmd;
 	struct mmc_data *data = host->data;
+	struct mxs_ssp *ssp = &host->ssp;
 	u32 stat;
 
 	spin_lock(&host->lock);
 
-	stat = readl(host->base + HW_SSP_CTRL1(host));
+	stat = readl(ssp->base + HW_SSP_CTRL1(ssp));
 	writel(stat & MXS_MMC_IRQ_BITS,
-	       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
+	       ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR);
 
 	if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
 		mmc_signal_sdio_irq(host->mmc);
@@ -366,6 +367,8 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 	unsigned int data_size = 0, log2_blksz;
 	unsigned int blocks = data->blocks;
 
+	struct mxs_ssp *ssp = &host->ssp;
+
 	u32 ignore_crc, get_resp, long_resp, read;
 	u32 ctrl0, cmd0, cmd1, val;
 
@@ -408,15 +411,15 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 		blocks = 1;
 
 	/* xfer count, block size and count need to be set differently */
-	if (ssp_is_old(host)) {
+	if (ssp_is_old(ssp)) {
 		ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT);
 		cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) |
 			BF_SSP(blocks - 1, CMD0_BLOCK_COUNT);
 	} else {
-		writel(data_size, host->base + HW_SSP_XFER_SIZE);
+		writel(data_size, ssp->base + HW_SSP_XFER_SIZE);
 		writel(BF_SSP(log2_blksz, BLOCK_SIZE_BLOCK_SIZE) |
 		       BF_SSP(blocks - 1, BLOCK_SIZE_BLOCK_COUNT),
-		       host->base + HW_SSP_BLOCK_SIZE);
+		       ssp->base + HW_SSP_BLOCK_SIZE);
 	}
 
 	if ((cmd->opcode == MMC_STOP_TRANSMISSION) ||
@@ -431,11 +434,11 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 	}
 
 	/* set the timeout count */
-	timeout = mxs_ns_to_ssp_ticks(host->clk_rate, data->timeout_ns);
-	val = readl(host->base + HW_SSP_TIMING(host));
+	timeout = mxs_ns_to_ssp_ticks(ssp->clk_rate, data->timeout_ns);
+	val = readl(ssp->base + HW_SSP_TIMING(ssp));
 	val &= ~(BM_SSP_TIMING_TIMEOUT);
 	val |= BF_SSP(timeout, TIMING_TIMEOUT);
-	writel(val, host->base + HW_SSP_TIMING(host));
+	writel(val, ssp->base + HW_SSP_TIMING(ssp));
 
 	/* pio */
 	host->ssp_pio_words[0] = ctrl0;
@@ -500,11 +503,12 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
 {
+	struct mxs_ssp *ssp = &host->ssp;
 	unsigned int ssp_clk, ssp_sck;
 	u32 clock_divide, clock_rate;
 	u32 val;
 
-	ssp_clk = clk_get_rate(host->clk);
+	ssp_clk = clk_get_rate(ssp->clk);
 
 	for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
 		clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
@@ -521,13 +525,13 @@ static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
 
 	ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
 
-	val = readl(host->base + HW_SSP_TIMING(host));
+	val = readl(ssp->base + HW_SSP_TIMING(ssp));
 	val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
 	val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
 	val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
-	writel(val, host->base + HW_SSP_TIMING(host));
+	writel(val, ssp->base + HW_SSP_TIMING(ssp));
 
-	host->clk_rate = ssp_sck;
+	ssp->clk_rate = ssp_sck;
 
 	dev_dbg(mmc_dev(host->mmc),
 		"%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
@@ -552,6 +556,7 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
@@ -560,19 +565,19 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
 	if (enable) {
 		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
-		       host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+		       ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
-		       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
+		       ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_SET);
 
-		if (readl(host->base + HW_SSP_STATUS(host)) &
+		if (readl(ssp->base + HW_SSP_STATUS(ssp)) &
 				BM_SSP_STATUS_SDIO_IRQ)
 			mmc_signal_sdio_irq(host->mmc);
 
 	} else {
 		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
-		       host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+		       ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
 		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
-		       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
+		       ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR);
 	}
 
 	spin_unlock_irqrestore(&host->lock, flags);
@@ -635,6 +640,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	dma_cap_mask_t mask;
 	struct regulator *reg_vmmc;
 	enum of_gpio_flags flags;
+	struct mxs_ssp *ssp;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -648,14 +654,16 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	host = mmc_priv(mmc);
-	host->base = devm_request_and_ioremap(&pdev->dev, iores);
-	if (!host->base) {
+	ssp = &host->ssp;
+	ssp->dev = &pdev->dev;
+	ssp->base = devm_request_and_ioremap(&pdev->dev, iores);
+	if (!ssp->base) {
 		ret = -EADDRNOTAVAIL;
 		goto out_mmc_free;
 	}
 
 	if (np) {
-		host->devid = (enum mxs_ssp_id) of_id->data;
+		ssp->devid = (enum mxs_ssp_id) of_id->data;
 		/*
 		 * TODO: This is a temporary solution and should be changed
 		 * to use generic DMA binding later when the helpers get in.
@@ -668,7 +676,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 			goto out_mmc_free;
 		}
 	} else {
-		host->devid = pdev->id_entry->driver_data;
+		ssp->devid = pdev->id_entry->driver_data;
 		host->dma_channel = dmares->start;
 	}
 
@@ -691,12 +699,12 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 		goto out_mmc_free;
 	}
 
-	host->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(host->clk)) {
-		ret = PTR_ERR(host->clk);
+	ssp->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssp->clk)) {
+		ret = PTR_ERR(ssp->clk);
 		goto out_mmc_free;
 	}
-	clk_prepare_enable(host->clk);
+	clk_prepare_enable(ssp->clk);
 
 	mxs_mmc_reset(host);
 
@@ -741,8 +749,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 
 	mmc->max_segs = 52;
 	mmc->max_blk_size = 1 << 0xf;
-	mmc->max_blk_count = (ssp_is_old(host)) ? 0xff : 0xffffff;
-	mmc->max_req_size = (ssp_is_old(host)) ? 0xffff : 0xffffffff;
+	mmc->max_blk_count = (ssp_is_old(ssp)) ? 0xff : 0xffffff;
+	mmc->max_req_size = (ssp_is_old(ssp)) ? 0xffff : 0xffffffff;
 	mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
 
 	platform_set_drvdata(pdev, mmc);
@@ -766,8 +774,8 @@ out_free_dma:
 	if (host->dmach)
 		dma_release_channel(host->dmach);
 out_clk_put:
-	clk_disable_unprepare(host->clk);
-	clk_put(host->clk);
+	clk_disable_unprepare(ssp->clk);
+	clk_put(ssp->clk);
 out_mmc_free:
 	mmc_free_host(mmc);
 	return ret;
@@ -777,6 +785,7 @@ static int mxs_mmc_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
 
 	mmc_remove_host(mmc);
 
@@ -785,8 +794,8 @@ static int mxs_mmc_remove(struct platform_device *pdev)
 	if (host->dmach)
 		dma_release_channel(host->dmach);
 
-	clk_disable_unprepare(host->clk);
-	clk_put(host->clk);
+	clk_disable_unprepare(ssp->clk);
+	clk_put(ssp->clk);
 
 	mmc_free_host(mmc);
 
@@ -798,11 +807,12 @@ static int mxs_mmc_suspend(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
 	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
 	int ret = 0;
 
 	ret = mmc_suspend_host(mmc);
 
-	clk_disable_unprepare(host->clk);
+	clk_disable_unprepare(ssp->clk);
 
 	return ret;
 }
@@ -811,9 +821,10 @@ static int mxs_mmc_resume(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
 	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
 	int ret = 0;
 
-	clk_prepare_enable(host->clk);
+	clk_prepare_enable(ssp->clk);
 
 	ret = mmc_resume_host(mmc);
 
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index 7dfa1d7..475f69f 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -128,4 +128,12 @@ enum mxs_ssp_id {
 	IMX28_SSP,
 };
 
+struct mxs_ssp {
+	struct device			*dev;
+	void __iomem			*base;
+	struct clk			*clk;
+	unsigned int			clk_rate;
+	enum mxs_ssp_id			devid;
+};
+
 #endif	/* __LINUX_SPI_MXS_SPI_H__ */
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 05/10] mmc: spi: Pull out the SSP clock configuration function
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (3 preceding siblings ...)
  2012-08-03 15:26 ` [PATCH 04/10] mmc: spi: Pull out parts shared between MMC and SPI Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 06/10 V3] spi: Add SPI driver for mx233/mx28 Marek Vasut
                   ` (6 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

Pull out the MMC clock configuration function and make it
into SSP clock configuration function, so it can be used by
the SPI driver too.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/mxs/Makefile    |    2 +-
 drivers/clk/mxs/clk-ssp.c   |   62 +++++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/host/mxs-mmc.c  |   39 +--------------------------
 include/linux/spi/mxs-spi.h |    2 ++
 4 files changed, 66 insertions(+), 39 deletions(-)
 create mode 100644 drivers/clk/mxs/clk-ssp.c

diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
index 7bedeec..a6a2223 100644
--- a/drivers/clk/mxs/Makefile
+++ b/drivers/clk/mxs/Makefile
@@ -2,7 +2,7 @@
 # Makefile for mxs specific clk
 #
 
-obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
+obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o
 
 obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
 obj-$(CONFIG_SOC_IMX28) += clk-imx28.o
diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c
new file mode 100644
index 0000000..af7bdbf
--- /dev/null
+++ b/drivers/clk/mxs/clk-ssp.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2012 DENX Software Engineering, GmbH
+ *
+ * Pulled from code:
+ * Portions copyright (C) 2003 Russell King, PXA MMCI Driver
+ * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/spi/mxs-spi.h>
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate)
+{
+	unsigned int ssp_clk, ssp_sck;
+	u32 clock_divide, clock_rate;
+	u32 val;
+
+	ssp_clk = clk_get_rate(ssp->clk);
+
+	for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
+		clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
+		clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
+		if (clock_rate <= 255)
+			break;
+	}
+
+	if (clock_divide > 254) {
+		dev_err(ssp->dev,
+			"%s: cannot set clock to %d\n", __func__, rate);
+		return;
+	}
+
+	ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
+
+	val = readl(ssp->base + HW_SSP_TIMING(ssp));
+	val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
+	val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
+	val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
+	writel(val, ssp->base + HW_SSP_TIMING(ssp));
+
+	ssp->clk_rate = ssp_sck;
+
+	dev_dbg(ssp->dev,
+		"%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
+		__func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
+}
+EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate);
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 7b85e03..0813340 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -501,43 +501,6 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	mxs_mmc_start_cmd(host, mrq->cmd);
 }
 
-static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
-{
-	struct mxs_ssp *ssp = &host->ssp;
-	unsigned int ssp_clk, ssp_sck;
-	u32 clock_divide, clock_rate;
-	u32 val;
-
-	ssp_clk = clk_get_rate(ssp->clk);
-
-	for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
-		clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
-		clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
-		if (clock_rate <= 255)
-			break;
-	}
-
-	if (clock_divide > 254) {
-		dev_err(mmc_dev(host->mmc),
-			"%s: cannot set clock to %d\n", __func__, rate);
-		return;
-	}
-
-	ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
-
-	val = readl(ssp->base + HW_SSP_TIMING(ssp));
-	val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
-	val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
-	val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
-	writel(val, ssp->base + HW_SSP_TIMING(ssp));
-
-	ssp->clk_rate = ssp_sck;
-
-	dev_dbg(mmc_dev(host->mmc),
-		"%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
-		__func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
-}
-
 static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct mxs_mmc_host *host = mmc_priv(mmc);
@@ -550,7 +513,7 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		host->bus_width = 0;
 
 	if (ios->clock)
-		mxs_mmc_set_clk_rate(host, ios->clock);
+		mxs_ssp_set_clk_rate(&host->ssp, ios->clock);
 }
 
 static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index 475f69f..d07f8dc 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -136,4 +136,6 @@ struct mxs_ssp {
 	enum mxs_ssp_id			devid;
 };
 
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
+
 #endif	/* __LINUX_SPI_MXS_SPI_H__ */
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 06/10 V3] spi: Add SPI driver for mx233/mx28
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (4 preceding siblings ...)
  2012-08-03 15:26 ` [PATCH 05/10] mmc: spi: Pull out the SSP clock configuration function Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 07/10] mmc: spi: Pull out common DMA parts from MXS MMC Marek Vasut
                   ` (5 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

This is slightly reworked version of the SPI driver.
Support for DT has been added and it's been converted
to queued API.

Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/spi/Kconfig   |    7 +
 drivers/spi/Makefile  |    1 +
 drivers/spi/spi-mxs.c |  431 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 439 insertions(+)
 create mode 100644 drivers/spi/spi-mxs.c

V3: Drop mxs_spi_cleanup()
    Set "hz" unconditionally to dev->max_speed_hz and then trim it down.
    Add comment about how Freescale is recycling random bits in CTRL0 register.

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 5f84b55..6992b30 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -364,6 +364,13 @@ config SPI_STMP3XXX
 	help
 	  SPI driver for Freescale STMP37xx/378x SoC SSP interface
 
+config SPI_MXS
+	tristate "Freescale MXS SPI controller"
+	depends on ARCH_MXS
+	select STMP_DEVICE
+	help
+	  SPI driver for Freescale MXS devices.
+
 config SPI_TEGRA
 	tristate "Nvidia Tegra SPI controller"
 	depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 3920dcf..3b72d87 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
 obj-$(CONFIG_SPI_MPC512x_PSC)		+= spi-mpc512x-psc.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= spi-mpc52xx-psc.o
 obj-$(CONFIG_SPI_MPC52xx)		+= spi-mpc52xx.o
+obj-$(CONFIG_SPI_MXS)			+= spi-mxs.o
 obj-$(CONFIG_SPI_NUC900)		+= spi-nuc900.o
 obj-$(CONFIG_SPI_OC_TINY)		+= spi-oc-tiny.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= spi-omap-uwire.o
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
new file mode 100644
index 0000000..7bf826f
--- /dev/null
+++ b/drivers/spi/spi-mxs.c
@@ -0,0 +1,431 @@
+/*
+ * Freescale MXS SPI master driver
+ *
+ * Copyright 2012 DENX Software Engineering, GmbH.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * Rework and transition to new API by:
+ * Marek Vasut <marex@denx.de>
+ *
+ * Based on previous attempt by:
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * Based on code from U-Boot bootloader by:
+ * Marek Vasut <marex@denx.de>
+ *
+ * Based on spi-stmp.c, which is:
+ * Author: Dmitry Pervushin <dimka@embeddedalley.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/highmem.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/fsl/mxs-dma.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/stmp_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mxs-spi.h>
+
+#define DRIVER_NAME		"mxs-spi"
+
+#define SSP_TIMEOUT		1000	/* 1000 ms */
+
+struct mxs_spi {
+	struct mxs_ssp		ssp;
+};
+
+static int mxs_spi_setup_transfer(struct spi_device *dev,
+				struct spi_transfer *t)
+{
+	struct mxs_spi *spi = spi_master_get_devdata(dev->master);
+	struct mxs_ssp *ssp = &spi->ssp;
+	uint8_t bits_per_word;
+	uint32_t hz = 0;
+
+	bits_per_word = dev->bits_per_word;
+	if (t && t->bits_per_word)
+		bits_per_word = t->bits_per_word;
+
+	if (bits_per_word != 8) {
+		dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
+					__func__, bits_per_word);
+		return -EINVAL;
+	}
+
+	hz = dev->max_speed_hz;
+	if (t && t->speed_hz)
+		hz = min(hz, t->speed_hz);
+	if (hz == 0) {
+		dev_err(&dev->dev, "Cannot continue with zero clock\n");
+		return -EINVAL;
+	}
+
+	mxs_ssp_set_clk_rate(ssp, hz);
+
+	writel(BF_SSP_CTRL1_SSP_MODE(BV_SSP_CTRL1_SSP_MODE__SPI) |
+		     BF_SSP_CTRL1_WORD_LENGTH
+		     (BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS) |
+		     ((dev->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) |
+		     ((dev->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0),
+		     ssp->base + HW_SSP_CTRL1(ssp));
+
+	writel(0x0, ssp->base + HW_SSP_CMD0);
+	writel(0x0, ssp->base + HW_SSP_CMD1);
+
+	return 0;
+}
+
+static int mxs_spi_setup(struct spi_device *dev)
+{
+	int err = 0;
+
+	if (!dev->bits_per_word)
+		dev->bits_per_word = 8;
+
+	if (dev->mode & ~(SPI_CPOL | SPI_CPHA))
+		return -EINVAL;
+
+	err = mxs_spi_setup_transfer(dev, NULL);
+	if (err) {
+		dev_err(&dev->dev,
+			"Failed to setup transfer, error = %d\n", err);
+	}
+
+	return err;
+}
+
+static uint32_t mxs_spi_cs_to_reg(unsigned cs)
+{
+	uint32_t select = 0;
+
+	/*
+	 * i.MX28 Datasheet: 17.10.1: HW_SSP_CTRL0
+	 *
+	 * The bits BM_SSP_CTRL0_WAIT_FOR_CMD and BM_SSP_CTRL0_WAIT_FOR_IRQ
+	 * in HW_SSP_CTRL0 register do have multiple usage, please refer to
+	 * the datasheet for further details. In SPI mode, they are used to
+	 * toggle the chip-select lines (nCS pins).
+	 */
+	if (cs & 1)
+		select |= BM_SSP_CTRL0_WAIT_FOR_CMD;
+	if (cs & 2)
+		select |= BM_SSP_CTRL0_WAIT_FOR_IRQ;
+
+	return select;
+}
+
+static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
+{
+	const uint32_t mask =
+		BM_SSP_CTRL0_WAIT_FOR_CMD | BM_SSP_CTRL0_WAIT_FOR_IRQ;
+	uint32_t select;
+	struct mxs_ssp *ssp = &spi->ssp;
+
+	writel(mask, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+	select = mxs_spi_cs_to_reg(cs);
+	writel(select, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+}
+
+static inline void mxs_spi_enable(struct mxs_spi *spi)
+{
+	struct mxs_ssp *ssp = &spi->ssp;
+
+	writel(BM_SSP_CTRL0_LOCK_CS,
+		ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+	writel(BM_SSP_CTRL0_IGNORE_CRC,
+		ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+}
+
+static inline void mxs_spi_disable(struct mxs_spi *spi)
+{
+	struct mxs_ssp *ssp = &spi->ssp;
+
+	writel(BM_SSP_CTRL0_LOCK_CS,
+		ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+	writel(BM_SSP_CTRL0_IGNORE_CRC,
+		ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+}
+
+static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(SSP_TIMEOUT);
+	struct mxs_ssp *ssp = &spi->ssp;
+	uint32_t reg;
+
+	while (1) {
+		reg = readl_relaxed(ssp->base + offset);
+
+		if (set && ((reg & mask) == mask))
+			break;
+
+		if (!set && ((~reg & mask) == mask))
+			break;
+
+		udelay(1);
+
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
+			    unsigned char *buf, int len,
+			    int *first, int *last, int write)
+{
+	struct mxs_ssp *ssp = &spi->ssp;
+
+	if (*first)
+		mxs_spi_enable(spi);
+
+	mxs_spi_set_cs(spi, cs);
+
+	while (len--) {
+		if (*last && len == 0)
+			mxs_spi_disable(spi);
+
+		if (ssp->devid == IMX23_SSP) {
+			writel(BM_SSP_CTRL0_XFER_COUNT,
+				ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+			writel(1,
+				ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+		} else {
+			writel(1, ssp->base + HW_SSP_XFER_SIZE);
+		}
+
+		if (write)
+			writel(BM_SSP_CTRL0_READ,
+				ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+		else
+			writel(BM_SSP_CTRL0_READ,
+				ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+		writel(BM_SSP_CTRL0_RUN,
+				ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+		if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 1))
+			return -ETIMEDOUT;
+
+		if (write)
+			writel(*buf, ssp->base + HW_SSP_DATA(ssp));
+
+		writel(BM_SSP_CTRL0_DATA_XFER,
+			     ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+		if (!write) {
+			if (mxs_ssp_wait(spi, HW_SSP_STATUS(ssp),
+						BM_SSP_STATUS_FIFO_EMPTY, 0))
+				return -ETIMEDOUT;
+
+			*buf = (readl(ssp->base + HW_SSP_DATA(ssp)) & 0xff);
+		}
+
+		if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 0))
+			return -ETIMEDOUT;
+
+		buf++;
+	}
+
+	if (len <= 0)
+		return 0;
+
+	return -ETIMEDOUT;
+}
+
+static int mxs_spi_transfer_one(struct spi_master *master,
+				struct spi_message *m)
+{
+	struct mxs_spi *spi = spi_master_get_devdata(master);
+	struct mxs_ssp *ssp = &spi->ssp;
+	int first, last;
+	struct spi_transfer *t, *tmp_t;
+	int status = 0;
+	int cs;
+
+	first = last = 0;
+
+	cs = m->spi->chip_select;
+
+	list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) {
+
+		status = mxs_spi_setup_transfer(m->spi, t);
+		if (status)
+			break;
+
+		if (&t->transfer_list == m->transfers.next)
+			first = 1;
+		if (&t->transfer_list == m->transfers.prev)
+			last = 1;
+		if (t->rx_buf && t->tx_buf) {
+			dev_err(ssp->dev,
+				"Cannot send and receive simultaneously\n");
+			status = -EINVAL;
+			break;
+		}
+
+		if (t->tx_buf)
+			status = mxs_spi_txrx_pio(spi, cs, (void *)t->tx_buf,
+					     t->len, &first, &last, 1);
+		if (t->rx_buf)
+			status = mxs_spi_txrx_pio(spi, cs, t->rx_buf,
+					     t->len, &first, &last, 0);
+
+		m->actual_length += t->len;
+		if (status)
+			break;
+
+		first = last = 0;
+	}
+
+	m->status = 0;
+	spi_finalize_current_message(master);
+
+	return status;
+}
+
+static const struct of_device_id mxs_spi_dt_ids[] = {
+	{ .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
+	{ .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_spi_dt_ids);
+
+static int __devinit mxs_spi_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+			of_match_device(mxs_spi_dt_ids, &pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
+	struct spi_master *master;
+	struct mxs_spi *spi;
+	struct mxs_ssp *ssp;
+	struct resource *iores;
+	struct pinctrl *pinctrl;
+	struct clk *clk;
+	void __iomem *base;
+	int devid;
+	int ret = 0;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iores)
+		return -EINVAL;
+
+	base = devm_request_and_ioremap(&pdev->dev, iores);
+	if (!base)
+		return -EADDRNOTAVAIL;
+
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl))
+		return PTR_ERR(pinctrl);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	if (np)
+		devid = (enum mxs_ssp_id) of_id->data;
+	else
+		devid = pdev->id_entry->driver_data;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*spi));
+	if (!master)
+		return -ENOMEM;
+
+	master->transfer_one_message = mxs_spi_transfer_one;
+	master->setup = mxs_spi_setup;
+	master->mode_bits = SPI_CPOL | SPI_CPHA;
+	master->num_chipselect = 3;
+	master->dev.of_node = np;
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+
+	spi = spi_master_get_devdata(master);
+	ssp = &spi->ssp;
+	ssp->dev = &pdev->dev;
+	ssp->clk = clk;
+	ssp->base = base;
+	ssp->devid = devid;
+
+	clk_prepare_enable(ssp->clk);
+	ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
+
+	stmp_reset_block(ssp->base);
+
+	platform_set_drvdata(pdev, master);
+
+	ret = spi_register_master(master);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
+		goto out_master_free;
+	}
+
+	return 0;
+
+out_master_free:
+	platform_set_drvdata(pdev, NULL);
+	clk_disable_unprepare(ssp->clk);
+	spi_master_put(master);
+	return ret;
+}
+
+static int __devexit mxs_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct mxs_spi *spi;
+	struct mxs_ssp *ssp;
+
+	master = platform_get_drvdata(pdev);
+	spi = spi_master_get_devdata(master);
+	ssp = &spi->ssp;
+
+	spi_unregister_master(master);
+
+	platform_set_drvdata(pdev, NULL);
+
+	clk_disable_unprepare(ssp->clk);
+
+	spi_master_put(master);
+
+	return 0;
+}
+
+static struct platform_driver mxs_spi_driver = {
+	.probe	= mxs_spi_probe,
+	.remove	= __devexit_p(mxs_spi_remove),
+	.driver	= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = mxs_spi_dt_ids,
+	},
+};
+
+module_platform_driver(mxs_spi_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("MXS SPI master driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mxs-spi");
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 07/10] mmc: spi: Pull out common DMA parts from MXS MMC
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (5 preceding siblings ...)
  2012-08-03 15:26 ` [PATCH 06/10 V3] spi: Add SPI driver for mx233/mx28 Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 08/10 V2] spi: Add DMA support into SPI driver Marek Vasut
                   ` (4 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

These parts will be used by the MXS SPI driver too.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/mmc/host/mxs-mmc.c  |   88 +++++++++++++++++++++----------------------
 drivers/spi/spi-mxs.c       |    1 -
 include/linux/spi/mxs-spi.h |    9 +++++
 3 files changed, 51 insertions(+), 47 deletions(-)

diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 0813340..4da9966 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -41,7 +41,6 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
-#include <linux/fsl/mxs-dma.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/stmp_device.h>
 #include <linux/mmc/mxs-mmc.h>
@@ -69,13 +68,6 @@ struct mxs_mmc_host {
 	struct mmc_command		*cmd;
 	struct mmc_data			*data;
 
-	int				dma_channel;
-	struct dma_chan         	*dmach;
-	struct mxs_dma_data		dma_data;
-	unsigned int			dma_dir;
-	enum dma_transfer_direction	slave_dirn;
-	u32				ssp_pio_words[SSP_PIO_NUM];
-
 	unsigned char			bus_width;
 	spinlock_t			lock;
 	int				sdio_irq_en;
@@ -163,7 +155,7 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host)
 
 	if (data) {
 		dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-			     data->sg_len, host->dma_dir);
+			     data->sg_len, ssp->dma_dir);
 		/*
 		 * If there was an error on any block, we mark all
 		 * data blocks as being in error.
@@ -232,6 +224,7 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
 static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
 	struct mxs_mmc_host *host, unsigned long flags)
 {
+	struct mxs_ssp *ssp = &host->ssp;
 	struct dma_async_tx_descriptor *desc;
 	struct mmc_data *data = host->data;
 	struct scatterlist * sgl;
@@ -240,24 +233,24 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
 	if (data) {
 		/* data */
 		dma_map_sg(mmc_dev(host->mmc), data->sg,
-			   data->sg_len, host->dma_dir);
+			   data->sg_len, ssp->dma_dir);
 		sgl = data->sg;
 		sg_len = data->sg_len;
 	} else {
 		/* pio */
-		sgl = (struct scatterlist *) host->ssp_pio_words;
+		sgl = (struct scatterlist *) ssp->ssp_pio_words;
 		sg_len = SSP_PIO_NUM;
 	}
 
-	desc = dmaengine_prep_slave_sg(host->dmach,
-				sgl, sg_len, host->slave_dirn, flags);
+	desc = dmaengine_prep_slave_sg(ssp->dmach,
+				sgl, sg_len, ssp->slave_dirn, flags);
 	if (desc) {
 		desc->callback = mxs_mmc_dma_irq_callback;
 		desc->callback_param = host;
 	} else {
 		if (data)
 			dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-				     data->sg_len, host->dma_dir);
+				     data->sg_len, ssp->dma_dir);
 	}
 
 	return desc;
@@ -265,6 +258,7 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
 
 static void mxs_mmc_bc(struct mxs_mmc_host *host)
 {
+	struct mxs_ssp *ssp = &host->ssp;
 	struct mmc_command *cmd = host->cmd;
 	struct dma_async_tx_descriptor *desc;
 	u32 ctrl0, cmd0, cmd1;
@@ -278,17 +272,17 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host)
 		cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
 	}
 
-	host->ssp_pio_words[0] = ctrl0;
-	host->ssp_pio_words[1] = cmd0;
-	host->ssp_pio_words[2] = cmd1;
-	host->dma_dir = DMA_NONE;
-	host->slave_dirn = DMA_TRANS_NONE;
+	ssp->ssp_pio_words[0] = ctrl0;
+	ssp->ssp_pio_words[1] = cmd0;
+	ssp->ssp_pio_words[2] = cmd1;
+	ssp->dma_dir = DMA_NONE;
+	ssp->slave_dirn = DMA_TRANS_NONE;
 	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
 	if (!desc)
 		goto out;
 
 	dmaengine_submit(desc);
-	dma_async_issue_pending(host->dmach);
+	dma_async_issue_pending(ssp->dmach);
 	return;
 
 out:
@@ -298,6 +292,7 @@ out:
 
 static void mxs_mmc_ac(struct mxs_mmc_host *host)
 {
+	struct mxs_ssp *ssp = &host->ssp;
 	struct mmc_command *cmd = host->cmd;
 	struct dma_async_tx_descriptor *desc;
 	u32 ignore_crc, get_resp, long_resp;
@@ -319,17 +314,17 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host)
 		cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
 	}
 
-	host->ssp_pio_words[0] = ctrl0;
-	host->ssp_pio_words[1] = cmd0;
-	host->ssp_pio_words[2] = cmd1;
-	host->dma_dir = DMA_NONE;
-	host->slave_dirn = DMA_TRANS_NONE;
+	ssp->ssp_pio_words[0] = ctrl0;
+	ssp->ssp_pio_words[1] = cmd0;
+	ssp->ssp_pio_words[2] = cmd1;
+	ssp->dma_dir = DMA_NONE;
+	ssp->slave_dirn = DMA_TRANS_NONE;
 	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
 	if (!desc)
 		goto out;
 
 	dmaengine_submit(desc);
-	dma_async_issue_pending(host->dmach);
+	dma_async_issue_pending(ssp->dmach);
 	return;
 
 out:
@@ -441,11 +436,11 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 	writel(val, ssp->base + HW_SSP_TIMING(ssp));
 
 	/* pio */
-	host->ssp_pio_words[0] = ctrl0;
-	host->ssp_pio_words[1] = cmd0;
-	host->ssp_pio_words[2] = cmd1;
-	host->dma_dir = DMA_NONE;
-	host->slave_dirn = DMA_TRANS_NONE;
+	ssp->ssp_pio_words[0] = ctrl0;
+	ssp->ssp_pio_words[1] = cmd0;
+	ssp->ssp_pio_words[2] = cmd1;
+	ssp->dma_dir = DMA_NONE;
+	ssp->slave_dirn = DMA_TRANS_NONE;
 	desc = mxs_mmc_prep_dma(host, 0);
 	if (!desc)
 		goto out;
@@ -453,14 +448,14 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 	/* append data sg */
 	WARN_ON(host->data != NULL);
 	host->data = data;
-	host->dma_dir = dma_data_dir;
-	host->slave_dirn = slave_dirn;
+	ssp->dma_dir = dma_data_dir;
+	ssp->slave_dirn = slave_dirn;
 	desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
 		goto out;
 
 	dmaengine_submit(desc);
-	dma_async_issue_pending(host->dmach);
+	dma_async_issue_pending(ssp->dmach);
 	return;
 out:
 	dev_warn(mmc_dev(host->mmc),
@@ -557,14 +552,15 @@ static const struct mmc_host_ops mxs_mmc_ops = {
 static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
 {
 	struct mxs_mmc_host *host = param;
+	struct mxs_ssp *ssp = &host->ssp;
 
 	if (!mxs_dma_is_apbh(chan))
 		return false;
 
-	if (chan->chan_id != host->dma_channel)
+	if (chan->chan_id != ssp->dma_channel)
 		return false;
 
-	chan->private = &host->dma_data;
+	chan->private = &ssp->dma_data;
 
 	return true;
 }
@@ -632,7 +628,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 		 * to use generic DMA binding later when the helpers get in.
 		 */
 		ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
-					   &host->dma_channel);
+					   &ssp->dma_channel);
 		if (ret) {
 			dev_err(mmc_dev(host->mmc),
 				"failed to get dma channel\n");
@@ -640,7 +636,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 		}
 	} else {
 		ssp->devid = pdev->id_entry->driver_data;
-		host->dma_channel = dmares->start;
+		ssp->dma_channel = dmares->start;
 	}
 
 	host->mmc = mmc;
@@ -673,9 +669,9 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
-	host->dma_data.chan_irq = irq_dma;
-	host->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
-	if (!host->dmach) {
+	ssp->dma_data.chan_irq = irq_dma;
+	ssp->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
+	if (!ssp->dmach) {
 		dev_err(mmc_dev(host->mmc),
 			"%s: failed to request dma\n", __func__);
 		goto out_clk_put;
@@ -714,7 +710,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	mmc->max_blk_size = 1 << 0xf;
 	mmc->max_blk_count = (ssp_is_old(ssp)) ? 0xff : 0xffffff;
 	mmc->max_req_size = (ssp_is_old(ssp)) ? 0xffff : 0xffffffff;
-	mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
+	mmc->max_seg_size = dma_get_max_seg_size(ssp->dmach->device->dev);
 
 	platform_set_drvdata(pdev, mmc);
 
@@ -734,8 +730,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	return 0;
 
 out_free_dma:
-	if (host->dmach)
-		dma_release_channel(host->dmach);
+	if (ssp->dmach)
+		dma_release_channel(ssp->dmach);
 out_clk_put:
 	clk_disable_unprepare(ssp->clk);
 	clk_put(ssp->clk);
@@ -754,8 +750,8 @@ static int mxs_mmc_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	if (host->dmach)
-		dma_release_channel(host->dmach);
+	if (ssp->dmach)
+		dma_release_channel(ssp->dmach);
 
 	clk_disable_unprepare(ssp->clk);
 	clk_put(ssp->clk);
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 7bf826f..0f28afb 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -46,7 +46,6 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
-#include <linux/fsl/mxs-dma.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/stmp_device.h>
 #include <linux/spi/spi.h>
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index d07f8dc..61ae130 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -24,6 +24,8 @@
 #ifndef __LINUX_SPI_MXS_SPI_H__
 #define __LINUX_SPI_MXS_SPI_H__
 
+#include <linux/fsl/mxs-dma.h>
+
 #define ssp_is_old(host)	((host)->devid == IMX23_SSP)
 
 /* SSP registers */
@@ -134,6 +136,13 @@ struct mxs_ssp {
 	struct clk			*clk;
 	unsigned int			clk_rate;
 	enum mxs_ssp_id			devid;
+
+	int				dma_channel;
+	struct dma_chan			*dmach;
+	struct mxs_dma_data		dma_data;
+	unsigned int			dma_dir;
+	enum dma_transfer_direction	slave_dirn;
+	u32				ssp_pio_words[SSP_PIO_NUM];
 };
 
 void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 08/10 V2] spi: Add DMA support into SPI driver
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (6 preceding siblings ...)
  2012-08-03 15:26 ` [PATCH 07/10] mmc: spi: Pull out common DMA parts from MXS MMC Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 09/10 V2] spi: Add SSP/SPI device tree documentation Marek Vasut
                   ` (3 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/spi/spi-mxs.c |  231 +++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 216 insertions(+), 15 deletions(-)

V2: Fix freeing of DMA channel in .remove()

diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 0f28afb..130a436 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -55,8 +55,12 @@
 
 #define SSP_TIMEOUT		1000	/* 1000 ms */
 
+#define SG_NUM			4
+#define SG_MAXLEN		0xff00
+
 struct mxs_spi {
 	struct mxs_ssp		ssp;
+	struct completion	c;
 };
 
 static int mxs_spi_setup_transfer(struct spi_device *dev,
@@ -194,6 +198,115 @@ static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
 	return 0;
 }
 
+static void mxs_ssp_dma_irq_callback(void *param)
+{
+	struct mxs_spi *spi = param;
+	complete(&spi->c);
+}
+
+static irqreturn_t mxs_ssp_irq_handler(int irq, void *dev_id)
+{
+	struct mxs_ssp *ssp = dev_id;
+	dev_err(ssp->dev, "%s[%i] CTRL1=%08x STATUS=%08x\n",
+		__func__, __LINE__,
+		readl(ssp->base + HW_SSP_CTRL1(ssp)),
+		readl(ssp->base + HW_SSP_STATUS(ssp)));
+	return IRQ_HANDLED;
+}
+
+static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
+			    unsigned char *buf, int len,
+			    int *first, int *last, int write)
+{
+	struct mxs_ssp *ssp = &spi->ssp;
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist sg[SG_NUM];
+	int sg_count;
+	uint32_t pio = BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs);
+	int ret;
+
+	if (len > SG_NUM * SG_MAXLEN) {
+		dev_err(ssp->dev, "Data chunk too big for DMA\n");
+		return -EINVAL;
+	}
+
+	init_completion(&spi->c);
+
+	if (*first)
+		pio |= BM_SSP_CTRL0_LOCK_CS;
+	if (*last)
+		pio |= BM_SSP_CTRL0_IGNORE_CRC;
+	if (!write)
+		pio |= BM_SSP_CTRL0_READ;
+
+	if (ssp->devid == IMX23_SSP)
+		pio |= len;
+	else
+		writel(len, ssp->base + HW_SSP_XFER_SIZE);
+
+	/* Queue the PIO register write transfer. */
+	desc = dmaengine_prep_slave_sg(ssp->dmach,
+			(struct scatterlist *)&pio,
+			1, DMA_TRANS_NONE, 0);
+	if (!desc) {
+		dev_err(ssp->dev,
+			"Failed to get PIO reg. write descriptor.\n");
+		return -EINVAL;
+	}
+
+	/* Queue the DMA data transfer. */
+	sg_init_table(sg, (len / SG_MAXLEN) + 1);
+	sg_count = 0;
+	while (len) {
+		sg_set_buf(&sg[sg_count++], buf, min(len, SG_MAXLEN));
+		len -= min(len, SG_MAXLEN);
+		buf += min(len, SG_MAXLEN);
+	}
+	dma_map_sg(ssp->dev, sg, sg_count,
+		write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	desc = dmaengine_prep_slave_sg(ssp->dmach, sg, sg_count,
+			write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
+	if (!desc) {
+		dev_err(ssp->dev,
+			"Failed to get DMA data write descriptor.\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/*
+	 * The last descriptor must have this callback,
+	 * to finish the DMA transaction.
+	 */
+	desc->callback = mxs_ssp_dma_irq_callback;
+	desc->callback_param = spi;
+
+	/* Start the transfer. */
+	dmaengine_submit(desc);
+	dma_async_issue_pending(ssp->dmach);
+
+	ret = wait_for_completion_timeout(&spi->c,
+				msecs_to_jiffies(SSP_TIMEOUT));
+
+	if (!ret) {
+		dev_err(ssp->dev, "DMA transfer timeout\n");
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	ret = 0;
+
+err:
+	for (--sg_count; sg_count >= 0; sg_count--) {
+		dma_unmap_sg(ssp->dev, &sg[sg_count], 1,
+			write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	}
+
+	return ret;
+}
+
 static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
 			    unsigned char *buf, int len,
 			    int *first, int *last, int write)
@@ -281,19 +394,49 @@ static int mxs_spi_transfer_one(struct spi_master *master,
 			first = 1;
 		if (&t->transfer_list == m->transfers.prev)
 			last = 1;
-		if (t->rx_buf && t->tx_buf) {
+		if ((t->rx_buf && t->tx_buf) || (t->rx_dma && t->tx_dma)) {
 			dev_err(ssp->dev,
 				"Cannot send and receive simultaneously\n");
 			status = -EINVAL;
 			break;
 		}
 
-		if (t->tx_buf)
-			status = mxs_spi_txrx_pio(spi, cs, (void *)t->tx_buf,
-					     t->len, &first, &last, 1);
-		if (t->rx_buf)
-			status = mxs_spi_txrx_pio(spi, cs, t->rx_buf,
-					     t->len, &first, &last, 0);
+		/*
+		 * Small blocks can be transfered via PIO.
+		 * Measured by empiric means:
+		 *
+		 * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
+		 *
+		 * DMA only: 2.164808 seconds, 473.0KB/s
+		 * Combined: 1.676276 seconds, 610.9KB/s
+		 */
+		if (t->len <= 256) {
+			writel(BM_SSP_CTRL1_DMA_ENABLE,
+				ssp->base + HW_SSP_CTRL1(ssp) +
+				STMP_OFFSET_REG_CLR);
+
+			if (t->tx_buf)
+				status = mxs_spi_txrx_pio(spi, cs,
+						(void *)t->tx_buf,
+						t->len, &first, &last, 1);
+			if (t->rx_buf)
+				status = mxs_spi_txrx_pio(spi, cs,
+						t->rx_buf, t->len,
+						&first, &last, 0);
+		} else {
+			writel(BM_SSP_CTRL1_DMA_ENABLE,
+				ssp->base + HW_SSP_CTRL1(ssp) +
+				STMP_OFFSET_REG_SET);
+
+			if (t->tx_buf)
+				status = mxs_spi_txrx_dma(spi, cs,
+						(void *)t->tx_buf, t->len,
+						&first, &last, 1);
+			if (t->rx_buf)
+				status = mxs_spi_txrx_dma(spi, cs,
+						t->rx_buf, t->len,
+						&first, &last, 0);
+		}
 
 		m->actual_length += t->len;
 		if (status)
@@ -308,6 +451,21 @@ static int mxs_spi_transfer_one(struct spi_master *master,
 	return status;
 }
 
+static bool mxs_ssp_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct mxs_ssp *ssp = param;
+
+	if (!mxs_dma_is_apbh(chan))
+		return false;
+
+	if (chan->chan_id != ssp->dma_channel)
+		return false;
+
+	chan->private = &ssp->dma_data;
+
+	return true;
+}
+
 static const struct of_device_id mxs_spi_dt_ids[] = {
 	{ .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
 	{ .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
@@ -323,15 +481,18 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
 	struct spi_master *master;
 	struct mxs_spi *spi;
 	struct mxs_ssp *ssp;
-	struct resource *iores;
+	struct resource *iores, *dmares;
 	struct pinctrl *pinctrl;
 	struct clk *clk;
 	void __iomem *base;
-	int devid;
-	int ret = 0;
+	int devid, dma_channel;
+	int ret = 0, irq_err, irq_dma;
+	dma_cap_mask_t mask;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iores)
+	irq_err = platform_get_irq(pdev, 0);
+	irq_dma = platform_get_irq(pdev, 1);
+	if (!iores || irq_err < 0 || irq_dma < 0)
 		return -EINVAL;
 
 	base = devm_request_and_ioremap(&pdev->dev, iores);
@@ -346,10 +507,26 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	if (np)
+	if (np) {
 		devid = (enum mxs_ssp_id) of_id->data;
-	else
+		/*
+		 * TODO: This is a temporary solution and should be changed
+		 * to use generic DMA binding later when the helpers get in.
+		 */
+		ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
+					   &dma_channel);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to get DMA channel\n");
+			return -EINVAL;
+		}
+	} else {
+		dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+		if (!dmares)
+			return -EINVAL;
 		devid = pdev->id_entry->driver_data;
+		dma_channel = dmares->start;
+	}
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*spi));
 	if (!master)
@@ -368,8 +545,28 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
 	ssp->clk = clk;
 	ssp->base = base;
 	ssp->devid = devid;
+	ssp->dma_channel = dma_channel;
+
+	ret = devm_request_irq(&pdev->dev, irq_err, mxs_ssp_irq_handler, 0,
+			       DRIVER_NAME, ssp);
+	if (ret)
+		goto out_master_free;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	ssp->dma_data.chan_irq = irq_dma;
+	ssp->dmach = dma_request_channel(mask, mxs_ssp_dma_filter, ssp);
+	if (!ssp->dmach) {
+		dev_err(ssp->dev, "Failed to request DMA\n");
+		goto out_master_free;
+	}
 
+	/*
+	 * Crank up the clock to 120MHz, this will be further divided onto a
+	 * proper speed.
+	 */
 	clk_prepare_enable(ssp->clk);
+	clk_set_rate(ssp->clk, 120 * 1000 * 1000);
 	ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
 
 	stmp_reset_block(ssp->base);
@@ -379,14 +576,16 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
 	ret = spi_register_master(master);
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
-		goto out_master_free;
+		goto out_free_dma;
 	}
 
 	return 0;
 
-out_master_free:
+out_free_dma:
 	platform_set_drvdata(pdev, NULL);
+	dma_release_channel(ssp->dmach);
 	clk_disable_unprepare(ssp->clk);
+out_master_free:
 	spi_master_put(master);
 	return ret;
 }
@@ -405,6 +604,8 @@ static int __devexit mxs_spi_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
+	dma_release_channel(ssp->dmach);
+
 	clk_disable_unprepare(ssp->clk);
 
 	spi_master_put(master);
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 09/10 V2] spi: Add SSP/SPI device tree documentation
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (7 preceding siblings ...)
  2012-08-03 15:26 ` [PATCH 08/10 V2] spi: Add DMA support into SPI driver Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-03 15:26 ` [PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi Marek Vasut
                   ` (2 subsequent siblings)
  11 siblings, 0 replies; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 Documentation/devicetree/bindings/spi/mxs-spi.txt |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt

V2: Fix the address property length to 0x2000

diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
new file mode 100644
index 0000000..c36296f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
@@ -0,0 +1,18 @@
+* Freescale MX233/MX28 SSP/SPI
+
+Required properties:
+- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
+- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+
+Example:
+
+ssp0: ssp at 80010000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	reg = <0x80010000 0x2000>;
+	interrupts = <96 82>;
+	fsl,ssp-dma-channel = <0>;
+};
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (8 preceding siblings ...)
  2012-08-03 15:26 ` [PATCH 09/10 V2] spi: Add SSP/SPI device tree documentation Marek Vasut
@ 2012-08-03 15:26 ` Marek Vasut
  2012-08-06  2:29   ` Shawn Guo
  2012-08-13 12:51 ` [PATCH 00/10 V3] MXS SPI driver Mark Brown
  2012-08-17 21:55 ` Mark Brown
  11 siblings, 1 reply; 16+ messages in thread
From: Marek Vasut @ 2012-08-03 15:26 UTC (permalink / raw)
  To: linux-arm-kernel

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/boot/dts/imx28.dtsi |   39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index badc76a..4a0f12c 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -507,6 +507,45 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				spi0_pins_a: spi0 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids =
+						<0x2000 0x2010 0x2020 0x2030
+						0x2040 0x2050 0x2060 0x2070
+						0x2080 0x2090 0x20a0>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				spi1_pins_a: spi1 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids =
+						<0x20c0 0x20d0 0x20e0 0x20f0>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				spi2_pins_a: spi2 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids =
+						<0x2100 0x2110 0x2120
+						0x2130 0x2140 0x2150>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				spi3_pins_a: spi3 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids =
+						<0x2180 0x2190 0x21a0 0x21b0>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
 			};
 
 			digctl at 8001c000 {
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi
  2012-08-03 15:26 ` [PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi Marek Vasut
@ 2012-08-06  2:29   ` Shawn Guo
  0 siblings, 0 replies; 16+ messages in thread
From: Shawn Guo @ 2012-08-06  2:29 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Aug 03, 2012 at 05:26:15PM +0200, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Attila Kinali <attila@kinali.ch>
> Cc: Chris Ball <cjb@laptop.org>
> CC: Dong Aisheng <b29396@freescale.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> CC: Shawn Guo <shawn.guo@linaro.org>
> ---
>  arch/arm/boot/dts/imx28.dtsi |   39 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index badc76a..4a0f12c 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -507,6 +507,45 @@
>  					fsl,voltage = <1>;
>  					fsl,pull-up = <0>;
>  				};
> +
> +				spi0_pins_a: spi0 at 0 {
> +					reg = <0>;
> +					fsl,pinmux-ids =
> +						<0x2000 0x2010 0x2020 0x2030
> +						0x2040 0x2050 0x2060 0x2070
> +						0x2080 0x2090 0x20a0>;

Please follow the new format, one id per line with a comment afterward.

> +					fsl,drive-strength = <1>;
> +					fsl,voltage = <1>;
> +					fsl,pull-up = <1>;
> +				};
> +
> +				spi1_pins_a: spi1 at 0 {
> +					reg = <0>;
> +					fsl,pinmux-ids =
> +						<0x20c0 0x20d0 0x20e0 0x20f0>;
> +					fsl,drive-strength = <1>;
> +					fsl,voltage = <1>;
> +					fsl,pull-up = <1>;
> +				};
> +
> +				spi2_pins_a: spi2 at 0 {
> +					reg = <0>;
> +					fsl,pinmux-ids =
> +						<0x2100 0x2110 0x2120
> +						0x2130 0x2140 0x2150>;
> +					fsl,drive-strength = <1>;
> +					fsl,voltage = <1>;
> +					fsl,pull-up = <1>;
> +				};
> +
> +				spi3_pins_a: spi3 at 0 {
> +					reg = <0>;
> +					fsl,pinmux-ids =
> +						<0x2180 0x2190 0x21a0 0x21b0>;
> +					fsl,drive-strength = <1>;
> +					fsl,voltage = <1>;
> +					fsl,pull-up = <1>;
> +				};

I do not accept patch adding pinctrl settings alone.  Instead, I want
them to be added together with the users (board dts).  That said, we
do not want to enumerate all the possible pinctrl settings but just
the ones being used.

>  			};
>  
>  			digctl at 8001c000 {
> -- 
> 1.7.10.4
> 

-- 
Regards,
Shawn

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 00/10 V3] MXS SPI driver
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (9 preceding siblings ...)
  2012-08-03 15:26 ` [PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi Marek Vasut
@ 2012-08-13 12:51 ` Mark Brown
  2012-08-13 14:08   ` Shawn Guo
  2012-08-17 21:55 ` Mark Brown
  11 siblings, 1 reply; 16+ messages in thread
From: Mark Brown @ 2012-08-13 12:51 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Aug 03, 2012 at 05:26:05PM +0200, Marek Vasut wrote:
> This patchset adds SPI master support for Freescale i.MX233/i.MX28.
> This is rebased on top of next-20120713. Please consider applying,
> bugs shall now be squashed during the previous two review rounds.

Do we have any ETA for review from the MMC side?  I'd like to get these
patches out of my queue one way or another, it seems like for the simple
code motion bits at least we should be easy enough to get out of the
way.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 00/10 V3] MXS SPI driver
  2012-08-13 12:51 ` [PATCH 00/10 V3] MXS SPI driver Mark Brown
@ 2012-08-13 14:08   ` Shawn Guo
  2012-08-13 15:23     ` Chris Ball
  0 siblings, 1 reply; 16+ messages in thread
From: Shawn Guo @ 2012-08-13 14:08 UTC (permalink / raw)
  To: linux-arm-kernel

On Mon, Aug 13, 2012 at 01:51:58PM +0100, Mark Brown wrote:
> Do we have any ETA for review from the MMC side?  I'd like to get these
> patches out of my queue one way or another, it seems like for the simple
> code motion bits at least we should be easy enough to get out of the
> way.

For mxs-mmc part:

Reviewed-by: Shawn Guo <shawn.guo@linaro.org>

Chris,

Can you take a look at the series and give your ACK to bless it go via
SPI tree?

-- 
Regards,
Shawn

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 00/10 V3] MXS SPI driver
  2012-08-13 14:08   ` Shawn Guo
@ 2012-08-13 15:23     ` Chris Ball
  0 siblings, 0 replies; 16+ messages in thread
From: Chris Ball @ 2012-08-13 15:23 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

On Mon, Aug 13 2012, Shawn Guo wrote:
> On Mon, Aug 13, 2012 at 01:51:58PM +0100, Mark Brown wrote:
>> Do we have any ETA for review from the MMC side?  I'd like to get these
>> patches out of my queue one way or another, it seems like for the simple
>> code motion bits at least we should be easy enough to get out of the
>> way.
>
> For mxs-mmc part:
>
> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
>
> Chris,
>
> Can you take a look at the series and give your ACK to bless it go via
> SPI tree?

Thanks, looks good.  For the SPI tree:

Acked-by: Chris Ball <cjb@laptop.org>

-- 
Chris Ball   <cjb@laptop.org>   <http://printf.net/>
One Laptop Per Child

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 00/10 V3] MXS SPI driver
  2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
                   ` (10 preceding siblings ...)
  2012-08-13 12:51 ` [PATCH 00/10 V3] MXS SPI driver Mark Brown
@ 2012-08-17 21:55 ` Mark Brown
  11 siblings, 0 replies; 16+ messages in thread
From: Mark Brown @ 2012-08-17 21:55 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Aug 03, 2012 at 05:26:05PM +0200, Marek Vasut wrote:
> This patchset adds SPI master support for Freescale i.MX233/i.MX28.
> This is rebased on top of next-20120713. Please consider applying,
> bugs shall now be squashed during the previous two review rounds.

I applied all these except patch 10 (the pinctrl data) which Shawn
wasn't happy with and which seems like it'd make sense to merge via the
arch tree anyway since it's likely to avoid merge conflicts.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120817/2d4d51e9/attachment.sig>

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2012-08-17 21:55 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-03 15:26 [PATCH 00/10 V3] MXS SPI driver Marek Vasut
2012-08-03 15:26 ` [PATCH 01/10] mmc: spi: Move SSP register definitions into separate file Marek Vasut
2012-08-03 15:26 ` [PATCH 02/10] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP Marek Vasut
2012-08-03 15:26 ` [PATCH 03/10] mmc: spi: Add necessary bits into mxs-spi.h Marek Vasut
2012-08-03 15:26 ` [PATCH 04/10] mmc: spi: Pull out parts shared between MMC and SPI Marek Vasut
2012-08-03 15:26 ` [PATCH 05/10] mmc: spi: Pull out the SSP clock configuration function Marek Vasut
2012-08-03 15:26 ` [PATCH 06/10 V3] spi: Add SPI driver for mx233/mx28 Marek Vasut
2012-08-03 15:26 ` [PATCH 07/10] mmc: spi: Pull out common DMA parts from MXS MMC Marek Vasut
2012-08-03 15:26 ` [PATCH 08/10 V2] spi: Add DMA support into SPI driver Marek Vasut
2012-08-03 15:26 ` [PATCH 09/10 V2] spi: Add SSP/SPI device tree documentation Marek Vasut
2012-08-03 15:26 ` [PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi Marek Vasut
2012-08-06  2:29   ` Shawn Guo
2012-08-13 12:51 ` [PATCH 00/10 V3] MXS SPI driver Mark Brown
2012-08-13 14:08   ` Shawn Guo
2012-08-13 15:23     ` Chris Ball
2012-08-17 21:55 ` Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).