From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@opensource.wolfsonmicro.com (Mark Brown) Date: Wed, 22 Aug 2012 20:27:23 +0100 Subject: [PATCH v2 1/2] ARM: clk-imx35: Fix SSI clock registration In-Reply-To: <1345466362-2576-1-git-send-email-fabio.estevam@freescale.com> References: <1345466362-2576-1-git-send-email-fabio.estevam@freescale.com> Message-ID: <20120822192723.GS7995@opensource.wolfsonmicro.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Aug 20, 2012 at 09:39:22AM -0300, Fabio Estevam wrote: > SSI block has two types of clock: > > ipg: bus clock, the clock needed for accessing registers. > per: peripheral clock, the clock needed for generating the bit rate. > > Currently SSI driver only supports slave mode and only need to handle > the ipg clock, because the peripheral clock comes from the master codec. > > Only register the ipg clock and do not register the peripheral clock for ssi. Tested-by: Mark Brown in that it stops boot hanging on the board, though it still doesn't make AC'97 come out of reset happily. That's probably some separate issue (pinmux perhaps?) though. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: