From mboxrd@z Thu Jan  1 00:00:00 1970
From: tony@atomide.com (Tony Lindgren)
Date: Fri, 31 Aug 2012 08:52:26 -0700
Subject: Without MACH_ option Early printk (DEBUG_LL)
In-Reply-To: <5040D03B.2050304@ti.com>
References: <5040D03B.2050304@ti.com>
Message-ID: <20120831155226.GL1303@atomide.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

* Vaibhav Hiremath <hvaibhav@ti.com> [120831 07:55]:
> Hi Russell & Tony,
> 
> AM335X EVM (based on AM33XX device) only supports DT boot mode and
> doesn't have CONFIG_MACH_AM335XEVM option defined. Some time back during
> baseport submission we had aligned that, we won't create separate EVM
> options, killing the board file all-together.
> 
> Having said that, the early printk option (DEBUG_LL) is broken, the
> auto-generated file "./include/generated/mach-types.h" still refers to
> CONFIG_MACH_AM335XEVM option,

The way we're heading is that the DEBUG_LL options will only work for
one hardcoded machine where you need to select the uart type and address
in Kconfig. Or just patch it in.
 
> #ifdef CONFIG_MACH_AM335XEVM
> # ifdef machine_arch_type
> #  undef machine_arch_type
> #  define machine_arch_type     __machine_arch_type
> # else
> #  define machine_arch_type     MACH_TYPE_AM335XEVM
> # endif
> # define machine_is_am335xevm() (machine_arch_type == MACH_TYPE_AM335XEVM)
> #else
> # define machine_is_am335xevm() (0)
> #endif
> 
> 
> So I am thinking of changing the config_xxx option to SOC_AM33XX or
> ARCH_OMAP2PLUS, something like below,
> 
> am335xevm        SOC_AM33XX          AM335XEVM         3589
> 
> OR
> 
> am335xevm        ARCH_OMAP2PLUS      AM335XEVM         3589
> 
> 
> Can you comment on this? Based on that I will submit the patch.

I think that would at minimum break things for autogenerated
mach-types.h where if only some other non-am335xevm machine is
selected (like omap-generic) things don't get optimized out any
longer as they currently do.

Regards,

Tony