[PATCH 5/9] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end

[tony@atomide.com (Tony Lindgren)]

* Tony Lindgren <tony@atomide.com> [120830 17:53]:
> We can't use hardcoded interrupts for SPARSE_IRQ, and can replace
> the hardcoded gpio_base with twl_gpiochip.base after it's been
> allocated.
...

> --- a/include/linux/mfd/twl6040.h
> +++ b/include/linux/mfd/twl6040.h
> @@ -194,7 +194,6 @@ struct twl6040_vibra_data {
>  
>  struct twl6040_platform_data {
>  	int audpwron_gpio;	/* audio power-on gpio */
> -	unsigned int irq_base;
>  
>  	struct twl6040_codec_data *codec;
>  	struct twl6040_vibra_data *vibra;

The platform_data irq_base is not being used it seems..

> @@ -222,7 +221,6 @@ struct twl6040 {
>  	unsigned int mclk;
>  
>  	unsigned int irq;
> -	unsigned int irq_base;
>  	u8 irq_masks_cur;
>  	u8 irq_masks_cache;
>  };

..but irq_base here is still in use as that's where the value from
irq_alloc_descs() is being stored to. So I'll drop the changes to
struct twl6040 from this patch as otherwise twl6040 code won't compile.

Turns out I did not have twl6040 selected in any of the testconfigs
that I ran.

Regards,

Tony