linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] leds: leds-gpio: adopt pinctrl support
Date: Wed, 5 Sep 2012 05:13:08 +0200	[thread overview]
Message-ID: <201209050513.08588.marex@denx.de> (raw)
In-Reply-To: <CAK5ve-Jqc1xpXa0VM7=+MN1cvm=8ysg9W9WRiG66yq7GRfh+Gw@mail.gmail.com>

Dear Bryan Wu,

> On Sat, Sep 1, 2012 at 4:16 PM, AnilKumar Ch <anilkumar@ti.com> wrote:
> > Adopt pinctrl support to leds-gpio driver based on leds-gpio
> > device pointer, pinctrl driver configure SoC pins to GPIO
> > mode according to definitions provided in .dts file.
> 
> Thanks for this, actually Marek Vasut submitted a similar patch
> before. I'm pretty fine with this patch.

Thanks for submitting this actually ... I didn't have time to properly 
investigate this.

> But without proper DT setting, it will also give us warning I think.
> or we can provide some dummy functions as a temp solution as Shawn
> pointed out before.

But this driver is also used on hardware that's not yet coverted to DT, so I'd 
say dev_warn() if CONFIG_OF is enabled and otherwise simply go on ? Actually, 
can we not skip whole this pinctrl thing if CONFIG_OF is disabled? Actually (2), 
what's the relationship between OF and pinctrl?

> -Bryan
> 
> > Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> > ---
> > 
> > Changes from v1:
> >         - Seperated from "Add DT for AM33XX devices" patch series
> >         - Incorporated Tony's comments on v1
> >         
> >           * Changed to warning message instead od error return
> >  
> >  drivers/leds/leds-gpio.c |    7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
> > index c032b21..ad577f4 100644
> > --- a/drivers/leds/leds-gpio.c
> > +++ b/drivers/leds/leds-gpio.c
> > @@ -20,6 +20,7 @@
> > 
> >  #include <linux/slab.h>
> >  #include <linux/workqueue.h>
> >  #include <linux/module.h>
> > 
> > +#include <linux/pinctrl/consumer.h>
> > 
> >  struct gpio_led_data {
> >  
> >         struct led_classdev cdev;
> > 
> > @@ -236,8 +237,14 @@ static int __devinit gpio_led_probe(struct
> > platform_device *pdev)
> > 
> >  {
> >  
> >         struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
> >         struct gpio_leds_priv *priv;
> > 
> > +       struct pinctrl *pinctrl;
> > 
> >         int i, ret = 0;
> > 
> > +       pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> > +       if (IS_ERR(pinctrl))
> > +               dev_warn(&pdev->dev,
> > +                       "pins are not configured from the driver\n");
> > +
> > 
> >         if (pdata && pdata->num_leds) {
> >         
> >                 priv = devm_kzalloc(&pdev->dev,
> >                 
> >                                 sizeof_gpio_leds_priv(pdata->num_leds),
> > 
> > --
> > 1.7.9.5
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-leds" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

Best regards,
Marek Vasut

  reply	other threads:[~2012-09-05  3:13 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-01  8:16 [PATCH v2] leds: leds-gpio: adopt pinctrl support AnilKumar Ch
2012-09-05  3:06 ` Bryan Wu
2012-09-05  3:13   ` Marek Vasut [this message]
2012-09-05 23:34     ` Tony Lindgren
2012-09-06  2:05       ` Marek Vasut
2012-09-06 17:45         ` Tony Lindgren
2012-09-07  0:09           ` Marek Vasut
2012-09-07  7:59             ` AnilKumar, Chimata
2012-09-07  8:22               ` Marek Vasut
2012-09-07 16:00               ` Bryan Wu
2012-09-07 21:39           ` Linus Walleij
2012-09-07 21:46             ` Tony Lindgren
2012-09-07  8:48 ` Domenico Andreoli
2012-09-07  9:10   ` AnilKumar, Chimata
2012-09-07 11:02     ` Domenico Andreoli
2012-09-07 14:30       ` AnilKumar, Chimata
2012-09-07 16:00         ` Domenico Andreoli
2012-09-07 16:35           ` Tony Lindgren
2012-09-07 21:59             ` Linus Walleij
2012-09-07 21:57           ` Linus Walleij
2012-09-08 23:44             ` Domenico Andreoli
2012-09-10 15:23               ` Linus Walleij
2012-09-10 17:41                 ` Stephen Warren
2012-09-10 19:34                   ` Linus Walleij
2012-09-10 19:44                     ` Stephen Warren
2012-09-07 21:36 ` Linus Walleij
2012-09-10 19:40 ` Linus Walleij
2012-10-01  7:03   ` AnilKumar, Chimata
2012-10-01  8:24     ` Linus Walleij
2012-10-01 15:44       ` Tony Lindgren
2012-10-01 19:59         ` Linus Walleij
2012-10-03 10:52           ` AnilKumar, Chimata
2012-10-03 12:36             ` Linus Walleij
2012-10-30 14:12               ` AnilKumar, Chimata
2012-11-04 17:37                 ` Linus Walleij
2012-11-05  6:44                   ` AnilKumar, Chimata
2012-11-05 16:27                   ` Tony Lindgren
2012-10-03 15:53             ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201209050513.08588.marex@denx.de \
    --to=marex@denx.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).